control_emulator.pad

Release 8.1i - Fit P.20131013
Copyright(c) 1995-2003 Xilinx Inc. All rights reserved

 6-29-2016  4:25PM

NOTE: This file is designed to be imported into a spreadsheet program
such as Microsoft Excel for viewing, printing and sorting. The pipe '|'
character is used as the data field separator.
This file is also designed to support parsing.

Input file:  control_emulator.ngd
output file: control_emulator.pad
Part type:   xcr3064xl
Speed grade: -10
Package:     vq44

Pinout by Pin Number:

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
Pin Number|Signal Name|Pin Usage|Pin Name|Direction|IO Standard|IO Bank Number|{blank}|Slew Rate|Termination|{blank}|Voltage|Constraint|
P1|TDI||I/O/TDI||||||||||
P2|mode_select|I|I/O|INPUT|||||||||
P3|reset_out|O|I/O|OUTPUT|||||||||
P4|PE||PORT_EN||||||||||
P5|qie_reset_out|O|I/O|OUTPUT|||||||||
P6|wte_out|O|I/O|OUTPUT|||||||||
P7|TMS||I/O/TMS||||||||||
P8|peltEnab1|O|I/O|OUTPUT|||||||||
P9|VCC||VCC||||||||||
P10|WPU||I/O||||||||||
P11|peltEnab2|O|I/O|OUTPUT|||||||||
P12|WPU||I/O||||||||||
P13|WPU||I/O||||||||||
P14|WPU||I/O||||||||||
P15|WPU||I/O||||||||||
P16|GND||GND||||||||||
P17|VCC||VCC||||||||||
P18|WPU||I/O||||||||||
P19|WPU||I/O||||||||||
P20|aux_in|I|I/O|INPUT|||||||||
P21|aux_out|O|I/O|OUTPUT|||||||||
P22|aux2|I|I/O|INPUT|||||||||
P23|aux3|I|I/O|INPUT|||||||||
P24|GND||GND||||||||||
P25|reset_switch|I|I/O|INPUT|||||||||
P26|TCK||I/O/TCK||||||||||
P27|clk_out_p2|O|I/O|OUTPUT|||||||||
P28|GPIO_Extra0|I|I/O|INPUT|||||||||
P29|VCC||VCC||||||||||
P30|pgood|I|I/O|INPUT|||||||||
P31|penable|O|I/O|OUTPUT|||||||||
P32|TDO||I/O/TDO||||||||||
P33|WPU||I/O||||||||||
P34|WPU||I/O||||||||||
P35|qie_reset_in|I|I/O|INPUT|||||||||
P36|GND||GND||||||||||
P37|clk_in_j1|GCK/I|IN3/GCK3||||||||||
P38|ext_clk_in|GCK/I|IN2/GCK2||||||||||
P39|int_clk_in|GCK/I|IN1/GCK1||||||||||
P40|WPU||IN0/GCK0||||||||||
P41|VCC||VCC||||||||||
P42|qie_reset_source|I|I/O|INPUT|||||||||
P43|WPU||I/O||||||||||
P44|clk_select|I|I/O|INPUT|||||||||

To preserve the pinout above for future design iterations in
Project Navigator simply execute the (Lock Pins) process
located under the (Implement Design) process in a toolbox named
(Optional Implementation Tools) or invoke PIN2UCF from the
command line. The location constraints will be written into your
specified UCF file