Is it possible to configure my Openwrt router so that it would share internet connection with the ps4 as well as performing the PPPwn?

[sasiccia84]

Hi!

Is it possible to configure my Openwrt router so that it would share internet connection with the ps4 as well as performing the PPPwn?

Thanks for your help!

Kind Regards,

S.

[CodeInvers3]

If you use a router with OpenWrt, yes. The repository includes pppoe-server, which shares an Internet connection to the PS4. Once pppwn is launched, wait about 40 seconds, and pppoe-server will launch automatically. You won't need to reconfigure a network connection on your PS4. This will also allow you to transfer files via FTP from a phone or PC.

If your router has more than one Ethernet port, you can connect another cable that provides Internet service. You won't need to configure anything, as OpenWrt does it automatically. If your router doesn't have more Ethernet ports, you can use the Wi-Fi service. To do this, go to Network -> Wireless and simply configure another wireless network that provides Internet.

[sasiccia84]

Hi CodeInvers3!

After trying for many hours I did manage to get the web server running and I can access to it from my pc at the following address:

http://192.168.1.1/pppwn.html

I do have same issues though:
The web server is not accessible from the ps4,
the ps4 is not connected to the internet.

I believe that this is because PPPOE server doesn't start,
Even if I push the button on the webserver:

Even if I clieck on the button on the interface,
It stays the same : "PPPOE START"

Is it maybe because I am missing some package?:

root@LEDE:~# opkg list-installed
base-files - 173.6-r4030-6028f00df0
busybox - 1.25.1-4
dropbear - 2017.75-5
firewall - 2017-05-27-a4d98aea-1
fstools - 2018-04-16-6609e98a-1
fwtool - 1
ip6tables - 1.4.21-3
iptables - 1.4.21-3
jshn - 2018-11-16-4382c76d-1
jsonfilter - 2016-07-02-dea067ad-1
kernel - 4.4.182-1-d576400bcaea680299b5ec5f1453a6ff
kmod-gpio-button-hotplug - 4.4.182-2
kmod-ip6tables - 4.4.182-1
kmod-ipt-conntrack - 4.4.182-1
kmod-ipt-core - 4.4.182-1
kmod-ipt-nat - 4.4.182-1
kmod-lib-crc-ccitt - 4.4.182-1
kmod-nf-conntrack - 4.4.182-1
kmod-nf-conntrack6 - 4.4.182-1
kmod-nf-ipt - 4.4.182-1
kmod-nf-ipt6 - 4.4.182-1
kmod-nf-nat - 4.4.182-1
kmod-nls-base - 4.4.182-1
kmod-ppp - 4.4.182-1
kmod-pppoe - 4.4.182-1
kmod-pppox - 4.4.182-1
kmod-slhc - 4.4.182-1
kmod-usb-core - 4.4.182-1
kmod-usb-ledtrig-usbport - 4.4.182-1
lede-keyring - 2017-01-20-a50b7529-1
libblobmsg-json - 2018-11-16-4382c76d-1
libc - 1.1.16-1
libgcc - 5.4.0-1
libip4tc - 1.4.21-3
libip6tc - 1.4.21-3
libiwinfo - 2016-09-21-fd9e17be-1
libiwinfo-lua - 2016-09-21-fd9e17be-1
libjson-c - 0.12.1-1
libjson-script - 2018-11-16-4382c76d-1
liblua - 5.1.5-1
libnl-tiny - 0.1-5
libpthread - 1.1.16-1
libubox - 2018-11-16-4382c76d-1
libubus - 2017-02-18-34c6e818-1
libubus-lua - 2017-02-18-34c6e818-1
libuci - 2018-01-01-141b64ef-1
libuci-lua - 2018-01-01-141b64ef-1
libuclient - 2018-11-24-3ba74ebc-1
libxtables - 1.4.21-3
logd - 2017-03-10-16f7e161-1
lua - 5.1.5-1
luci - git-19.271.72080-7b230b0-1
luci-app-firewall - git-19.271.72080-7b230b0-1
luci-base - git-19.271.72080-7b230b0-1
luci-lib-ip - git-19.271.72080-7b230b0-1
luci-lib-jsonc - git-19.271.72080-7b230b0-1
luci-lib-nixio - git-19.271.72080-7b230b0-1
luci-mod-admin-full - git-19.271.72080-7b230b0-1
luci-proto-ipv6 - git-19.271.72080-7b230b0-1
luci-proto-ppp - git-19.271.72080-7b230b0-1
luci-theme-bootstrap - git-19.271.72080-7b230b0-1
mtd - 23.1
netifd - 2017-01-25-650758b1-1
odhcp6c - 2017-01-30-c13b6a05-2
odhcpd - 2018-05-27-59339a76-4
opkg - 2019-01-18-7708a01a-1
ppp - 2.4.7-12
ppp-mod-pppoe - 2.4.7-12
procd - 2018-01-22-9a4036fb-2
rpcd - 2018-11-28-3aa81d0d-1
swconfig - 11
uboot-envtools - 2015.10-1
ubox - 2017-03-10-16f7e161-1
ubus - 2017-02-18-34c6e818-1
ubusd - 2017-02-18-34c6e818-1
uci - 2018-01-01-141b64ef-1
uclient-fetch - 2018-11-24-3ba74ebc-1
uhttpd - 2018-11-28-cdfc902a-1
uhttpd-mod-ubus - 2018-11-28-cdfc902a-1
usign - 2019-08-06-5a52b379-1

Any Ideas on how I could fix that?
Is there any chance we can chat on discord or something similar?

Thanks a lot!

S.

[CodeInvers3]

Hello, yes, it seems that pppoe-server isn't installed, so I recommend installing it with the command opkg update && opkg install rp-pppoe-common rp-pppoe-server. Alternatively, you can download it from https://downloads.openwrt.org/releases/, but you'll need to search based on your device's version and model; they are located in the packages section.
Check the instructions; I updated them recently.

[sasiccia84]

Hi CodeInvers3!

Now the PPPOE server finally starts, at least from the web server I can see this:

Unfortunately though, my ps4 doesn't get an IP... And after the PPPwn exploit is applied also the BIN and FTP servers go down... What could be causing this?
Here is again an updated list of my installed packages:

root@LEDE:~# opkg list-installed
base-files - 173.6-r4030-6028f00df0
busybox - 1.25.1-4
dropbear - 2017.75-5
firewall - 2017-05-27-a4d98aea-1
fstools - 2018-04-16-6609e98a-1
fwtool - 1
ip6tables - 1.4.21-3
iptables - 1.4.21-3
jshn - 2018-11-16-4382c76d-1
jsonfilter - 2016-07-02-dea067ad-1
kernel - 4.4.182-1-d576400bcaea680299b5ec5f1453a6ff
kmod-gpio-button-hotplug - 4.4.182-2
kmod-ip6tables - 4.4.182-1
kmod-ipt-conntrack - 4.4.182-1
kmod-ipt-core - 4.4.182-1
kmod-ipt-nat - 4.4.182-1
kmod-lib-crc-ccitt - 4.4.182-1
kmod-nf-conntrack - 4.4.182-1
kmod-nf-conntrack6 - 4.4.182-1
kmod-nf-ipt - 4.4.182-1
kmod-nf-ipt6 - 4.4.182-1
kmod-nf-nat - 4.4.182-1
kmod-nls-base - 4.4.182-1
kmod-ppp - 4.4.182-1
kmod-pppoe - 4.4.182-1
kmod-pppox - 4.4.182-1
kmod-slhc - 4.4.182-1
kmod-usb-core - 4.4.182-1
kmod-usb-ledtrig-usbport - 4.4.182-1
lede-keyring - 2017-01-20-a50b7529-1
libblobmsg-json - 2018-11-16-4382c76d-1
libc - 1.1.16-1
libgcc - 5.4.0-1
libip4tc - 1.4.21-3
libip6tc - 1.4.21-3
libiwinfo - 2016-09-21-fd9e17be-1
libiwinfo-lua - 2016-09-21-fd9e17be-1
libjson-c - 0.12.1-1
libjson-script - 2018-11-16-4382c76d-1
liblua - 5.1.5-1
libnl-tiny - 0.1-5
libpthread - 1.1.16-1
libubox - 2018-11-16-4382c76d-1
libubus - 2017-02-18-34c6e818-1
libubus-lua - 2017-02-18-34c6e818-1
libuci - 2018-01-01-141b64ef-1
libuci-lua - 2018-01-01-141b64ef-1
libuclient - 2018-11-24-3ba74ebc-1
libxtables - 1.4.21-3
logd - 2017-03-10-16f7e161-1
lua - 5.1.5-1
luci - git-19.271.72080-7b230b0-1
luci-app-firewall - git-19.271.72080-7b230b0-1
luci-base - git-19.271.72080-7b230b0-1
luci-lib-ip - git-19.271.72080-7b230b0-1
luci-lib-jsonc - git-19.271.72080-7b230b0-1
luci-lib-nixio - git-19.271.72080-7b230b0-1
luci-mod-admin-full - git-19.271.72080-7b230b0-1
luci-proto-ipv6 - git-19.271.72080-7b230b0-1
luci-proto-ppp - git-19.271.72080-7b230b0-1
luci-theme-bootstrap - git-19.271.72080-7b230b0-1
mtd - 23.1
netifd - 2017-01-25-650758b1-1
odhcp6c - 2017-01-30-c13b6a05-2
odhcpd - 2018-05-27-59339a76-4
opkg - 2019-01-18-7708a01a-1
ppp - 2.4.7-12
ppp-mod-pppoe - 2.4.7-12
procd - 2018-01-22-9a4036fb-2
rp-pppoe-common - 3.12-1
rp-pppoe-server - 3.12-1
rpcd - 2018-11-28-3aa81d0d-1
swconfig - 11
uboot-envtools - 2015.10-1
ubox - 2017-03-10-16f7e161-1
ubus - 2017-02-18-34c6e818-1
ubusd - 2017-02-18-34c6e818-1
uci - 2018-01-01-141b64ef-1
uclient-fetch - 2018-11-24-3ba74ebc-1
uhttpd - 2018-11-28-cdfc902a-1
uhttpd-mod-ubus - 2018-11-28-cdfc902a-1
usign - 2019-08-06-5a52b379-1

Since I had to build a custom firmware due to space constraints, could I be missing any other packages that would prevent my ps4 to get an IP?

Or could it maybe be a setting?

Thanks again for your help!

Looking forward to your feedback!

S.

[CodeInvers3]

Generally, PPPoe-server starts automatically when Goldhen is activated. You should wait up to 50 seconds. If it doesn’t start automatically, check the network status as shown in the image.

You can stop and start pppoe-server again from LuCI or from the console with this command /etc/init.d/pppoe-server restart and check its status with this other command /etc/init.d/pppoe-server status; it should show as running.

You can check if "ppp+" is in the Covered devices option in the firewall settings. To verify, go to Firewall -> Zones -> lan => wan, select edit, and then look in Firewall - Zone Settings as shown in the image.

You can check out this video I uploaded recently where I show how to install it
Youtube Install PPPw_ow

You can send me a message on X if you need support

[sasiccia84]

Hi CodeInvers3!

I've tried sending you a message over x but I couldn't, so I've commented your last post, could you please shoot me a message there?

Thanks a lot!

S.