Strange issue with some mulchers/cultivators

[Illgib81]

Version

8.1.0.0

Game Version

1.10.0.0

SP/MP

SP (Singleplayer)

What happened?

Hello, i have some issues using some mulchers, it doesn't follow the course, skip lines or take large detours around the map to reposition near the end field.

All my other machines instead works fine, i tested with vanilla tractor and tools and it act even worse.

Field size shouldn't matter, and i haven't tested in vanilla fields because there aren't any small enough like the one i made.

How can we reproduce this?

Don't know if is related to new made small field, but it happens in all i have created.

What did you expect to happen?

Following the actual route.

Attach your log.txt!

log.txt

Screenshots

Vanilla tools:
https://youtu.be/qH-pnkOYPGA

Mod tools: (all the other machines in my pack works perfectly fine, minus the mower that is from the same i3d)
https://youtu.be/Xl5Y4Qgin3g

[pvaiko]

Wow, never thought we will drive humans pushing hand tools...

Likely the combination of the narrow working width and small turn radius is messing up our turns, would you have a video with debug on so we can see the generated turn courses?

[Illgib81]

Yes it's a pack i made and i'm working on the ai and i was testing cp after the vanilla ai.
It works with almost all machines, minus the baler and the forage wagon, cp instead forks with all, but then i noted that the mulcher alone was skipping lines, then i tried with vanilla equipements, and it acted how showed in the video.
I tried on the smallest field in the south and it worked fine, so i don't know if is about the field size or that is made by me and not preplaced.
How can i activate the debug? You mean game ai vehicle debug?

[Illgib81]

The log mention an obstacles, but the isle options makes no difference if active or none.
It could be something in the map but then i cannot make any custom field, since in other oarts of the map cp doesn't even see or detect the new made fields and lock itself.

[pvaiko]

How can i activate the debug?

In the Courseplay vehicle menu, all the way to the bottom, like in your video here: https://youtu.be/qH-pnkOYPGA?t=12

[Illgib81]

https://youtu.be/_zcJPlqCzik
He see something inside the field, or is in the ground, don't know how they converted their own map.
Even if is something map related, can it help fine tune cp for similar situations? Or will be completely useless in case of custom fields.

[pvaiko]

Do you have the log for this (with debug)?

[Illgib81]

log.txt

[Pba47]

I have a similar problem with narrow sections of rice fields, so I assume it's some kind of issue with tracked vehicles.

[pvaiko]

issue with tracked vehicles

It is an issue with vehicles with small turning radius, which usually applies to tracked vehicles.

This should be fixed on main, you can test it if you know how to do it.

[Illgib81]

At the moment it happened only with the mulcher/mower, the tedder that have the same working width and turning radius doesn't have this problem, for example.