Automated release note commit

Author: cumulusAnia

content/cumulus-linux-40/Whats-New/rn.md

@@ -236,7 +236,7 @@ pdfhidden: True
 | <a name="2544155"></a> [2544155](#2544155) <a name="2544155"></a> <br /> | NCLU requires you to specify an interface with multiple <code>address-virtual</code> statements in ascending MAC address order. <br /><br /> | 3.7.5-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2544113"></a> [2544113](#2544113) <a name="2544113"></a> <br /> | Mac learning is not disabled by default on a double tagged peer link interface resulting in the MAC address changing between the MLAG bond and the peer link.<br />To work around this issue, disable MAC learning on QinQ VLANs by adding <code>bridge-learning off</code> to the VLAN stanza in the <code>etc/network/interfaces</code> file. | 3.7.9-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543937"></a> [2543937](#2543937) <a name="2543937"></a> <br /> | An interface alias configured outside FRR using <code>iproute2</code> is imported into the FRR running configuration and overrides the internal description. After an FRR reload, this causes FRR to delete the interface alias in an inefficient way. Depending on how many interfaces with aliases you have configured, this can cause a FRR reload to time out.<br />To work around this issue, remove the interface alias description from <code>iproute2</code>. | 3.7.8-3.7.10, 4.0.0-4.4.5 | 3.7.11-3.7.16|
-| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.4 | 5.10.0-5.16.1|
+| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.5 | 5.10.0-5.16.1|
 | <a name="2543900"></a> [2543900](#2543900) <a name="2543900"></a> <br /> | On the Mellanox switch, static VXLAN tunnels incorrectly allow traffic from any remote tunnel IP address. | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543841"></a> [2543841](#2543841) <a name="2543841"></a> <br /> | The <code>net show evpn vni detail json</code> command includes an extra empty dictionary at the end of the output. <br /> | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543816"></a> [2543816](#2543816) <a name="2543816"></a> <br /> | On the Dell S5248F-ON switch, <code>smond</code> might generate syslog messages indicating that the fan input RPM is lower than the normal low speed of 2500 RPM. Speeds as low as 1700 RPM are acceptable in normal thermal environments; therefore, you can ignore these messages.<br /> | 3.7.6-3.7.11, 4.0.0-4.4.5 | 3.7.12-3.7.16|
@@ -542,7 +542,7 @@ pdfhidden: True
 | <a name="2544155"></a> [2544155](#2544155) <a name="2544155"></a> <br /> | NCLU requires you to specify an interface with multiple <code>address-virtual</code> statements in ascending MAC address order. <br /><br /> | 3.7.5-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2544113"></a> [2544113](#2544113) <a name="2544113"></a> <br /> | Mac learning is not disabled by default on a double tagged peer link interface resulting in the MAC address changing between the MLAG bond and the peer link.<br />To work around this issue, disable MAC learning on QinQ VLANs by adding <code>bridge-learning off</code> to the VLAN stanza in the <code>etc/network/interfaces</code> file. | 3.7.9-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543937"></a> [2543937](#2543937) <a name="2543937"></a> <br /> | An interface alias configured outside FRR using <code>iproute2</code> is imported into the FRR running configuration and overrides the internal description. After an FRR reload, this causes FRR to delete the interface alias in an inefficient way. Depending on how many interfaces with aliases you have configured, this can cause a FRR reload to time out.<br />To work around this issue, remove the interface alias description from <code>iproute2</code>. | 3.7.8-3.7.10, 4.0.0-4.4.5 | 3.7.11-3.7.16|
-| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.4 | 5.10.0-5.16.1|
+| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.5 | 5.10.0-5.16.1|
 | <a name="2543900"></a> [2543900](#2543900) <a name="2543900"></a> <br /> | On the Mellanox switch, static VXLAN tunnels incorrectly allow traffic from any remote tunnel IP address. | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543841"></a> [2543841](#2543841) <a name="2543841"></a> <br /> | The <code>net show evpn vni detail json</code> command includes an extra empty dictionary at the end of the output. <br /> | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543816"></a> [2543816](#2543816) <a name="2543816"></a> <br /> | On the Dell S5248F-ON switch, <code>smond</code> might generate syslog messages indicating that the fan input RPM is lower than the normal low speed of 2500 RPM. Speeds as low as 1700 RPM are acceptable in normal thermal environments; therefore, you can ignore these messages.<br /> | 3.7.6-3.7.11, 4.0.0-4.4.5 | 3.7.12-3.7.16|

content/cumulus-linux-40/rn.xml

@@ -1746,7 +1746,7 @@ To work around this issue, remove the interface alias description from {{iproute
 Warning: The unit file, source configuration file or drop-ins of ntp@mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit
 
 You can safely ignore this warning.</td>
-<td>4.0.0-5.9.4</td>
+<td>4.0.0-5.9.5</td>
 <td>5.10.0-5.16.1</td>
 </tr>
 <tr>
@@ -4116,7 +4116,7 @@ To work around this issue, remove the interface alias description from {{iproute
 Warning: The unit file, source configuration file or drop-ins of ntp@mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit
 
 You can safely ignore this warning.</td>
-<td>4.0.0-5.9.4</td>
+<td>4.0.0-5.9.5</td>
 <td>5.10.0-5.16.1</td>
 </tr>
 <tr>

content/cumulus-linux-41/Whats-New/rn.md

@@ -229,7 +229,7 @@ pdfhidden: True
 | <a name="2544155"></a> [2544155](#2544155) <a name="2544155"></a> <br /> | NCLU requires you to specify an interface with multiple <code>address-virtual</code> statements in ascending MAC address order. <br /><br /> | 3.7.5-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2544113"></a> [2544113](#2544113) <a name="2544113"></a> <br /> | Mac learning is not disabled by default on a double tagged peer link interface resulting in the MAC address changing between the MLAG bond and the peer link.<br />To work around this issue, disable MAC learning on QinQ VLANs by adding <code>bridge-learning off</code> to the VLAN stanza in the <code>etc/network/interfaces</code> file. | 3.7.9-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543937"></a> [2543937](#2543937) <a name="2543937"></a> <br /> | An interface alias configured outside FRR using <code>iproute2</code> is imported into the FRR running configuration and overrides the internal description. After an FRR reload, this causes FRR to delete the interface alias in an inefficient way. Depending on how many interfaces with aliases you have configured, this can cause a FRR reload to time out.<br />To work around this issue, remove the interface alias description from <code>iproute2</code>. | 3.7.8-3.7.10, 4.0.0-4.4.5 | 3.7.11-3.7.16|
-| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.4 | 5.10.0-5.16.1|
+| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.5 | 5.10.0-5.16.1|
 | <a name="2543900"></a> [2543900](#2543900) <a name="2543900"></a> <br /> | On the Mellanox switch, static VXLAN tunnels incorrectly allow traffic from any remote tunnel IP address. | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543841"></a> [2543841](#2543841) <a name="2543841"></a> <br /> | The <code>net show evpn vni detail json</code> command includes an extra empty dictionary at the end of the output. <br /> | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543816"></a> [2543816](#2543816) <a name="2543816"></a> <br /> | On the Dell S5248F-ON switch, <code>smond</code> might generate syslog messages indicating that the fan input RPM is lower than the normal low speed of 2500 RPM. Speeds as low as 1700 RPM are acceptable in normal thermal environments; therefore, you can ignore these messages.<br /> | 3.7.6-3.7.11, 4.0.0-4.4.5 | 3.7.12-3.7.16|
@@ -489,7 +489,7 @@ pdfhidden: True
 | <a name="2544155"></a> [2544155](#2544155) <a name="2544155"></a> <br /> | NCLU requires you to specify an interface with multiple <code>address-virtual</code> statements in ascending MAC address order. <br /><br /> | 3.7.5-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2544113"></a> [2544113](#2544113) <a name="2544113"></a> <br /> | Mac learning is not disabled by default on a double tagged peer link interface resulting in the MAC address changing between the MLAG bond and the peer link.<br />To work around this issue, disable MAC learning on QinQ VLANs by adding <code>bridge-learning off</code> to the VLAN stanza in the <code>etc/network/interfaces</code> file. | 3.7.9-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543937"></a> [2543937](#2543937) <a name="2543937"></a> <br /> | An interface alias configured outside FRR using <code>iproute2</code> is imported into the FRR running configuration and overrides the internal description. After an FRR reload, this causes FRR to delete the interface alias in an inefficient way. Depending on how many interfaces with aliases you have configured, this can cause a FRR reload to time out.<br />To work around this issue, remove the interface alias description from <code>iproute2</code>. | 3.7.8-3.7.10, 4.0.0-4.4.5 | 3.7.11-3.7.16|
-| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.4 | 5.10.0-5.16.1|
+| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.5 | 5.10.0-5.16.1|
 | <a name="2543900"></a> [2543900](#2543900) <a name="2543900"></a> <br /> | On the Mellanox switch, static VXLAN tunnels incorrectly allow traffic from any remote tunnel IP address. | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543841"></a> [2543841](#2543841) <a name="2543841"></a> <br /> | The <code>net show evpn vni detail json</code> command includes an extra empty dictionary at the end of the output. <br /> | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543816"></a> [2543816](#2543816) <a name="2543816"></a> <br /> | On the Dell S5248F-ON switch, <code>smond</code> might generate syslog messages indicating that the fan input RPM is lower than the normal low speed of 2500 RPM. Speeds as low as 1700 RPM are acceptable in normal thermal environments; therefore, you can ignore these messages.<br /> | 3.7.6-3.7.11, 4.0.0-4.4.5 | 3.7.12-3.7.16|

content/cumulus-linux-41/rn.xml

@@ -1703,7 +1703,7 @@ To work around this issue, remove the interface alias description from {{iproute
 Warning: The unit file, source configuration file or drop-ins of ntp@mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit
 
 You can safely ignore this warning.</td>
-<td>4.0.0-5.9.4</td>
+<td>4.0.0-5.9.5</td>
 <td>5.10.0-5.16.1</td>
 </tr>
 <tr>
@@ -3743,7 +3743,7 @@ To work around this issue, remove the interface alias description from {{iproute
 Warning: The unit file, source configuration file or drop-ins of ntp@mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit
 
 You can safely ignore this warning.</td>
-<td>4.0.0-5.9.4</td>
+<td>4.0.0-5.9.5</td>
 <td>5.10.0-5.16.1</td>
 </tr>
 <tr>

content/cumulus-linux-42/Whats-New/rn.md

@@ -238,7 +238,7 @@ pdfhidden: True
 | <a name="2544155"></a> [2544155](#2544155) <a name="2544155"></a> <br /> | NCLU requires you to specify an interface with multiple <code>address-virtual</code> statements in ascending MAC address order. <br /><br /> | 3.7.5-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2544113"></a> [2544113](#2544113) <a name="2544113"></a> <br /> | Mac learning is not disabled by default on a double tagged peer link interface resulting in the MAC address changing between the MLAG bond and the peer link.<br />To work around this issue, disable MAC learning on QinQ VLANs by adding <code>bridge-learning off</code> to the VLAN stanza in the <code>etc/network/interfaces</code> file. | 3.7.9-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543937"></a> [2543937](#2543937) <a name="2543937"></a> <br /> | An interface alias configured outside FRR using <code>iproute2</code> is imported into the FRR running configuration and overrides the internal description. After an FRR reload, this causes FRR to delete the interface alias in an inefficient way. Depending on how many interfaces with aliases you have configured, this can cause a FRR reload to time out.<br />To work around this issue, remove the interface alias description from <code>iproute2</code>. | 3.7.8-3.7.10, 4.0.0-4.4.5 | 3.7.11-3.7.16|
-| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.4 | 5.10.0-5.16.1|
+| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.5 | 5.10.0-5.16.1|
 | <a name="2543900"></a> [2543900](#2543900) <a name="2543900"></a> <br /> | On the Mellanox switch, static VXLAN tunnels incorrectly allow traffic from any remote tunnel IP address. | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543841"></a> [2543841](#2543841) <a name="2543841"></a> <br /> | The <code>net show evpn vni detail json</code> command includes an extra empty dictionary at the end of the output. <br /> | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543816"></a> [2543816](#2543816) <a name="2543816"></a> <br /> | On the Dell S5248F-ON switch, <code>smond</code> might generate syslog messages indicating that the fan input RPM is lower than the normal low speed of 2500 RPM. Speeds as low as 1700 RPM are acceptable in normal thermal environments; therefore, you can ignore these messages.<br /> | 3.7.6-3.7.11, 4.0.0-4.4.5 | 3.7.12-3.7.16|
@@ -527,7 +527,7 @@ pdfhidden: True
 | <a name="2544155"></a> [2544155](#2544155) <a name="2544155"></a> <br /> | NCLU requires you to specify an interface with multiple <code>address-virtual</code> statements in ascending MAC address order. <br /><br /> | 3.7.5-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2544113"></a> [2544113](#2544113) <a name="2544113"></a> <br /> | Mac learning is not disabled by default on a double tagged peer link interface resulting in the MAC address changing between the MLAG bond and the peer link.<br />To work around this issue, disable MAC learning on QinQ VLANs by adding <code>bridge-learning off</code> to the VLAN stanza in the <code>etc/network/interfaces</code> file. | 3.7.9-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543937"></a> [2543937](#2543937) <a name="2543937"></a> <br /> | An interface alias configured outside FRR using <code>iproute2</code> is imported into the FRR running configuration and overrides the internal description. After an FRR reload, this causes FRR to delete the interface alias in an inefficient way. Depending on how many interfaces with aliases you have configured, this can cause a FRR reload to time out.<br />To work around this issue, remove the interface alias description from <code>iproute2</code>. | 3.7.8-3.7.10, 4.0.0-4.4.5 | 3.7.11-3.7.16|
-| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.4 | 5.10.0-5.16.1|
+| <a name="2543915"></a> [2543915](#2543915) <a name="2543915"></a> <br /> | When you enable a service in the management VRF, <code>systemctl</code> issues a warning similar to the following:<pre>Warning: The unit file, source configuration file or drop-ins of ntp&#64;mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit</pre>You can safely ignore this warning. | 4.0.0-5.9.5 | 5.10.0-5.16.1|
 | <a name="2543900"></a> [2543900](#2543900) <a name="2543900"></a> <br /> | On the Mellanox switch, static VXLAN tunnels incorrectly allow traffic from any remote tunnel IP address. | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543841"></a> [2543841](#2543841) <a name="2543841"></a> <br /> | The <code>net show evpn vni detail json</code> command includes an extra empty dictionary at the end of the output. <br /> | 3.7.8-3.7.16, 4.0.0-4.4.5 | |
 | <a name="2543816"></a> [2543816](#2543816) <a name="2543816"></a> <br /> | On the Dell S5248F-ON switch, <code>smond</code> might generate syslog messages indicating that the fan input RPM is lower than the normal low speed of 2500 RPM. Speeds as low as 1700 RPM are acceptable in normal thermal environments; therefore, you can ignore these messages.<br /> | 3.7.6-3.7.11, 4.0.0-4.4.5 | 3.7.12-3.7.16|

content/cumulus-linux-42/rn.xml

@@ -1699,7 +1699,7 @@ To work around this issue, remove the interface alias description from {{iproute
 Warning: The unit file, source configuration file or drop-ins of ntp@mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit
 
 You can safely ignore this warning.</td>
-<td>4.0.0-5.9.4</td>
+<td>4.0.0-5.9.5</td>
 <td>5.10.0-5.16.1</td>
 </tr>
 <tr>
@@ -3852,7 +3852,7 @@ To work around this issue, remove the interface alias description from {{iproute
 Warning: The unit file, source configuration file or drop-ins of ntp@mgmt.service changed on disk. Run 'systemctl daemon-reload' to reload unit
 
 You can safely ignore this warning.</td>
-<td>4.0.0-5.9.4</td>
+<td>4.0.0-5.9.5</td>
 <td>5.10.0-5.16.1</td>
 </tr>
 <tr>