Everpure FlashArray branding

purefa/CHANGELOG.md

@@ -1,5 +1,11 @@
 # CHANGELOG - PureFA
 
+## 1.3.1/ 2026-07-11
+
+***Added***:
+
+* Changed branding from Pure Storage to Everpure.
+
 ## 1.3.0/ 2025-07-10
 
 ***Added***:

purefa/README.md

@@ -2,7 +2,7 @@
 
 ## Overview
 
-This check monitors the [Pure Storage FlashArray][3] through the [Datadog Agent][2] and the [Pure Storage OpenMetrics exporter][1].
+This check monitors the [Everpure FlashArray][3] through the [Datadog Agent][2].
 
 The integration can provide performance data at the array, host, volume and pod level, as well as high-level capacity and configuration information.
 
@@ -12,8 +12,9 @@ You can monitor multiple FlashArrays and aggregate these into a single dashboard
 
  - Agent v7.26.x+ to utilize OpenMetricsBaseCheckV2
  - Python 3
- - The Pure Storage OpenMetrics exporter is installed and running in a containerized environment. Refer to the [GitHub repo][1] for installation instructions. 
-   - On FlashArrays running Purity//FA version 6.7.0 and higher the OpenMetrics exporter natively runs on the array, see Configuration for details
+ - FlashArray running Purity//FA version 6.7.0+
+   - For FlashArrays running Purity//FA version <6.7.0 the Pure Storage OpenMetrics exporter required to be installed and running in a containerized environment. Refer to the [GitHub repo][1] for installation instructions. 
+
 
 ## Setup
 
@@ -22,15 +23,15 @@ Follow the instructions below to install and configure this check for an Agent r
 ### Installation
 
 1. [Download and launch the Datadog Agent][9].
-2. Manually install the Pure FlashArray integration. See [Use Community Integrations][10] for more details based on your environment.
+2. Manually install the Everpure FlashArray integration. See [Use Community Integrations][10] for more details based on your environment.
 
 
 #### Host
 
 To configure this check for an Agent running on a host, run `sudo -u dd-agent -- datadog-agent integration install -t datadog-purefa==<INTEGRATION_VERSION>`.
 
 Note:  `<INTEGRATION_VERSION>` can be found within the [CHANGELOG.md][13] for Datadog Integration Extras. 
-  * e.g. `sudo -u dd-agent -- datadog-agent integration install -t datadog-purefa==1.3.0`
+  * e.g. `sudo -u dd-agent -- datadog-agent integration install -t datadog-purefa==1.3.1`
 
 ### Configuration
 
@@ -40,7 +41,7 @@ Note:  `<INTEGRATION_VERSION>` can be found within the [CHANGELOG.md][13] for Da
 
 > **Note**: The `/array` endpoint is required as an absolute minimum when creating your configuration file.
 
-#### (Preferred) For use with the native Pure Storage OpenMetrics Exporter (Purity//FA 6.7.0+)
+#### (Preferred) For use with the native Everpure OpenMetrics Exporter (Purity//FA 6.7.0+)
 ```yaml
 init_config:
    timeout: 60
@@ -169,15 +170,17 @@ instances:
 
 #### From PureFA Agent Check 1.0.x to 1.1.x
 
-1.1.x supports both the [Pure Storage OpenMetrics exporter][1] and the deprecated [Pure Storage Prometheus exporter][14].
+1.1.x supports the native Everpure FlashArray exporter, the [Pure Storage OpenMetrics exporter][1], and the deprecated [Pure Storage Prometheus exporter][14].
+
+- Note: The native Everpure FlashArray exporter and the [Pure Storage OpenMetrics exporter][1] use the same metric names and metric conventions.
 
 The dashboard for the deprecated [Pure Storage Prometheus exporter][14] has been renamed to `Pure FlashArray - Overview (Legacy Exporter)`.
 
-A listing of metrics that are both shared and unique to the different exporters are listed in [metrics.py][15]. You may need to update your dashboards and/or your alerts to match the new metric names when migrating from the [Pure Storage Prometheus exporter][14] to the [Pure Storage OpenMetrics exporter][1]. Please contact Pure Storage with the information in the Support tab if you have any questions.
+A listing of metrics that are both shared and unique to the different exporters are listed in [metrics.py][15]. You may need to update your dashboards and/or your alerts to match the new metric names when migrating from the [Pure Storage Prometheus exporter][14] to the [Pure Storage OpenMetrics exporter][1]. Please contact Everpure with the information in the Support tab if you have any questions.
 
 When migrating from [Pure Storage Prometheus exporter][14] to the [Pure Storage OpenMetrics exporter][1], the endpoints no longer have `/flasharray` in the endpoint URI.
 
-In future versions of the PureFA Agent Check, the metric names from the Pure Storage Prometheus exporter will be removed.
+In future versions of the PureFA Agent Check, the metric names from the Everpure Prometheus exporter will be removed.
 
 ### Troubleshooting
 
@@ -194,7 +197,7 @@ The dashboards included in this integration use the tags `env`, and `fa_array_na
 
 #### Increasing collection interval
 
-The Pure Storage FlashArray check sets `min_collection_interval` to `120` by default, and the minimum recommended value is `20`. You may increase/decrease `min_collection_interval` in the `purefa.d/conf.yaml` file if necessary:
+The Everpure FlashArray check sets `min_collection_interval` to `120` by default, and the minimum recommended value is `20`. You may increase/decrease `min_collection_interval` in the `purefa.d/conf.yaml` file if necessary:
 
 ```yaml
 min_collection_interval: 120
@@ -217,20 +220,19 @@ See [service_checks.json][12] for a list of service checks provided by this inte
 
 ## Support
 
-For support or feature requests, contact Pure Storage through the following methods:
-* Email: pure-observability@purestorage.com
-* Slack: [Pure Storage Code// Observability Channel][11].
+For support or feature requests, contact Everpure through the following methods:
+* Email: pure-observability@everpuredata.com
+
 
 [1]: https://github.com/PureStorage-OpenConnect/pure-fa-openmetrics-exporter
 [2]: /account/settings/agent/latest
-[3]: https://www.purestorage.com/products.html
+[3]: https://www.everpuredata.com/products.html
 [4]: https://github.com/datadog/integrations-extras/blob/master/purefa/datadog_checks/purefa/data/conf.yaml.example
 [5]: https://docs.datadoghq.com/agent/guide/agent-commands/#start-stop-and-restart-the-agent
 [6]: https://docs.datadoghq.com/agent/guide/agent-commands/#agent-status-and-information
 [7]: https://github.com/DataDog/integrations-extras/blob/master/purefa/metadata.csv
 [9]: /account/settings/agent/latest
 [10]: https://docs.datadoghq.com/agent/guide/community-integrations-installation-with-docker-agent
-[11]: https://code-purestorage.slack.com/messages/C0357KLR1EU
 [12]: https://github.com/DataDog/integrations-extras/blob/master/purefa/assets/service_checks.json
 [13]: https://github.com/DataDog/integrations-extras/blob/master/purefa/CHANGELOG.md
 [14]: https://github.com/PureStorage-OpenConnect/pure-exporter

purefa/assets/configuration/spec.yaml

@@ -10,7 +10,7 @@ files:
     - template: instances/openmetrics
       options:
       overrides:
-        openmetrics_endpoint.value.example: http://localhost:9490/metrics/flasharray/array?endpoint=array01
+        openmetrics_endpoint.value.example: https://<arrayIP-or-FQDN>/metrics/array?namespace=purefa
         openmetrics_endpoint.display_priority: 1
         hostname_label.value.example: host
         hostname_label.display_priority: 1
@@ -22,7 +22,7 @@ files:
         min_collection_interval.value.example: 120
         min_collection_interval.enabled: true
         cache_shared_labels.value.example: false
-        share_labels.value.enabled: true
+        share_labels.enabled: true
         share_labels.value.example:
           purefa_info:
             labels: