I’ve installed the latest Integration for ECOVACS and I’m using the model T 90 pro Omni.
Apparently, the robot gets recognized and I can see the map and also most of the info like the vacuum setting, the state of the charging station and so on.
But the start button and stop button are not working, I can’t pause the cleaning, etc.
So I can see all the infos at the moment, but I can’t actually control the robot.
Logger: deebot_client.commands.json.common Quelle: components/ecovacs/vacuum.py:324
Erstmals aufgetreten: 18:14:18 (8 Vorkommnisse)
Zuletzt protokolliert: 18:46:17
Command "clean" was not successfully. body=('code": 20003, 'msg': 'rep not support}
Logger: deebot_client.commands.json.common Quelle: components/ecovacs/vacuum.py:324
Erstmals aufgetreten: 18:14:18 (8 Vorkommnisse)
Zuletzt protokolliert: 18:46:17
Command "clean" was not successfully. body=('code": 20003, 'msg': 'rep not support}
Logger: deebot_client.message
Quelle: runner.py:289
Erstmals aufgetreten: 13:05:28 (97 Vorkommnisse)
Zuletzt protokolliert: 18:47:54
* Further 'Could not parse getLifeSpan' entries will be logged at DEBUG level
* Handler for message getMajorMap: {code': 20003,
'msg': 'rep not support') returned no response. This is a bug should not happen. Please report it
* Could not parse getMajorMap: {'body': {code': 20003,
'msg' 'rep not support), 'header': ('fwVer": '1.87.0',
'hwVer': '0.1.1', 'pri: 1, 'ts': '[1779980718325](tel:1779980718325)', 'tzm':
120, 'ver': '0.0.1', 'wkVer: '0.1.54')}
* Further 'Could not parse getMajorMap' entries will be logged at DEBUG level
* Handler for message getMapSubSet: {'code': 20003,
'msg' 'rep not support') returned no response. This is a bug should not happen. Please report it.
Logger: deebot_client.command
Quelle: runner.py:289
Erstmals aufgetreten: 13:05:28 (86 Vorkommnisse)
Zuletzt protokolliert: 18:47:54
* Could not parse getMapSubSet for twunby: {'ret: 'ok',
'resp': {body": 'code": 20003, 'msg: 'rep not support),
'header': ('wVer': '1.87.0', 'hwVer': 'O.1.1', 'pri: 1, 'ts':
'[1779986873061](tel:1779986873061)", 'tzm': 120, 'ver": '0.0.1', 'wkVer":
'0.1.54')}, 'id: '3HmZ, 'payload Type: i'}
* Could not parse getMapSubSet for twunby: {'ret: 'ok',
'resp': {body": f'code: 20003, 'msg': 'rep not support,
'header: (fwVer: '1.87.0', 'hwVer: 'O.1.1', 'pri: 1, 'ts":
'[1779986873475](tel:1779986873475), 'tzm': 120, 'ver': 'O.0.1', 'wkVer':
'0.1.54'}}, 'id": 'fwOq', 'payloadType: 'j}
* Could not parse getMapSubSet for twunby: {'ret: 'ok',
'resp': {'body': {'code': 20003, 'msg': 'rep not support),
'header': f'wVer': '1.87.0', 'hwVer': 'O.1.1', 'pri: 1, 'ts":
'1779986873487', 'tzm': 120, 'ver': '0.0.1', 'wkVer":
'0.1.54'}}, 'id': 'imUk', 'payloadType: I}
* Could not parse getMapSubSet for twunby: {'ret: 'ok',
'resp': {'body': f'code': 20003, 'msg: 'rep not support,
'header: {'fwVer: '1.87.0', 'hwVer: 'O.1.1", 'pri: 1, ts':
'[1779986873485](tel:1779986873485)', 'tzm: 120, 'ver': '0.0.1', 'wkVer':
'0.1.54'}}, 'id': 'Ih5i', 'payloadType: j'}
* Could not parse getMapSubSet for twunby: {'ret: 'ok',
'resp': {'body': {code': 20003, 'msg: 'rcp not support),
'header': ('fwVer': '1.87.0', 'hwVer': 'O.1.1', 'pri': 1, 'ts":
'[1779986873480](tel:1779986873480)', 'tzm': 120, 'ver': '0.0.1', 'wkVer':
'0.1.54')}, 'id': 'gOUu, 'payloadType': j
Checks
The problem
Hi!
I’ve installed the latest Integration for ECOVACS and I’m using the model T 90 pro Omni.
Apparently, the robot gets recognized and I can see the map and also most of the info like the vacuum setting, the state of the charging station and so on.
But the start button and stop button are not working, I can’t pause the cleaning, etc.
So I can see all the infos at the moment, but I can’t actually control the robot.
I get the following logs in HA:
Logger: deebot_client.commands.json.common Quelle: components/ecovacs/vacuum.py:324
Erstmals aufgetreten: 18:14:18 (8 Vorkommnisse)
Zuletzt protokolliert: 18:46:17
Command "clean" was not successfully. body=('code": 20003, 'msg': 'rep not support}
Logger: deebot_client.message
Quelle: runner.py:289
Erstmals aufgetreten: 13:05:28 (97 Vorkommnisse)
Zuletzt protokolliert: 18:47:54
Logger: deebot_client.command
Quelle: runner.py:289
Erstmals aufgetreten: 13:05:28 (86 Vorkommnisse)
Zuletzt protokolliert: 18:47:54
Thanks in advance! :-)
On which deebot device (vacuum) you have the issue?
T90 Pro Omni
Which version of the deebot-client are you using?
18.3.0
Country
DE
Continent
EU
Anything in the logs that might be useful for us?
Logger: deebot_client.commands.json.common Quelle: components/ecovacs/vacuum.py:324 Erstmals aufgetreten: 18:14:18 (8 Vorkommnisse) Zuletzt protokolliert: 18:46:17 Command "clean" was not successfully. body=('code": 20003, 'msg': 'rep not support} Logger: deebot_client.message Quelle: runner.py:289 Erstmals aufgetreten: 13:05:28 (97 Vorkommnisse) Zuletzt protokolliert: 18:47:54 * Further 'Could not parse getLifeSpan' entries will be logged at DEBUG level * Handler for message getMajorMap: {code': 20003, 'msg': 'rep not support') returned no response. This is a bug should not happen. Please report it * Could not parse getMajorMap: {'body': {code': 20003, 'msg' 'rep not support), 'header': ('fwVer": '1.87.0', 'hwVer': '0.1.1', 'pri: 1, 'ts': '[1779980718325](tel:1779980718325)', 'tzm': 120, 'ver': '0.0.1', 'wkVer: '0.1.54')} * Further 'Could not parse getMajorMap' entries will be logged at DEBUG level * Handler for message getMapSubSet: {'code': 20003, 'msg' 'rep not support') returned no response. This is a bug should not happen. Please report it. Logger: deebot_client.command Quelle: runner.py:289 Erstmals aufgetreten: 13:05:28 (86 Vorkommnisse) Zuletzt protokolliert: 18:47:54 * Could not parse getMapSubSet for twunby: {'ret: 'ok', 'resp': {body": 'code": 20003, 'msg: 'rep not support), 'header': ('wVer': '1.87.0', 'hwVer': 'O.1.1', 'pri: 1, 'ts': '[1779986873061](tel:1779986873061)", 'tzm': 120, 'ver": '0.0.1', 'wkVer": '0.1.54')}, 'id: '3HmZ, 'payload Type: i'} * Could not parse getMapSubSet for twunby: {'ret: 'ok', 'resp': {body": f'code: 20003, 'msg': 'rep not support, 'header: (fwVer: '1.87.0', 'hwVer: 'O.1.1', 'pri: 1, 'ts": '[1779986873475](tel:1779986873475), 'tzm': 120, 'ver': 'O.0.1', 'wkVer': '0.1.54'}}, 'id": 'fwOq', 'payloadType: 'j} * Could not parse getMapSubSet for twunby: {'ret: 'ok', 'resp': {'body': {'code': 20003, 'msg': 'rep not support), 'header': f'wVer': '1.87.0', 'hwVer': 'O.1.1', 'pri: 1, 'ts": '1779986873487', 'tzm': 120, 'ver': '0.0.1', 'wkVer": '0.1.54'}}, 'id': 'imUk', 'payloadType: I} * Could not parse getMapSubSet for twunby: {'ret: 'ok', 'resp': {'body': f'code': 20003, 'msg: 'rep not support, 'header: {'fwVer: '1.87.0', 'hwVer: 'O.1.1", 'pri: 1, ts': '[1779986873485](tel:1779986873485)', 'tzm: 120, 'ver': '0.0.1', 'wkVer': '0.1.54'}}, 'id': 'Ih5i', 'payloadType: j'} * Could not parse getMapSubSet for twunby: {'ret: 'ok', 'resp': {'body': {code': 20003, 'msg: 'rcp not support), 'header': ('fwVer': '1.87.0', 'hwVer': 'O.1.1', 'pri': 1, 'ts": '[1779986873480](tel:1779986873480)', 'tzm': 120, 'ver': '0.0.1', 'wkVer': '0.1.54')}, 'id': 'gOUu, 'payloadType': jAdditional information
No response