Skip to content

Actions: Duet3D/RepRapFirmware

Actions

Auto-close blank templates

Actions

Loading...
Loading

Show workflow options

Create status badge

Loading
issues.yml
125 workflow runs
125 workflow runs

Filter by Event

⌥ + click/return to exclude

Filter by Status

⌥ + click/return to exclude

Filter by Branch

⌥ + click/return to exclude

Filter by Actor

⌥ + click/return to exclude
[FeatureRequest]: Automatic Closed-Loop Tuning Algorithm for Easier Initial Setup Auto-close blank templates #418: Issue #1232 opened by robbiesilverhand
6s
6s
[FeatureRequest]: Add teaching mode to axes with closed loop control Auto-close blank templates #417: Issue #1231 opened by droftarts
9s
9s
[FeatureRequest]: Exposing filamentMonitor values Auto-close blank templates #416: Issue #1229 opened by Rickthebig
8s
8s
[FeatureRequest]: Water Cooled Spindle Sensor and GUI Feedback -CNC Auto-close blank templates #415: Issue #1228 opened by PrintFarm
10s
10s
Monitor heater power when maintaining steady temperature and raise heater fault if too high Auto-close blank templates #414: Issue #1227 opened by dc42
10s
10s
Allow for chamber temperature when calculating expected heating rate of extruder Auto-close blank templates #413: Issue #1226 opened by dc42
10s
10s
[Feature Request] non‑coordinated moves Auto-close blank templates #412: Issue #1225 opened by T3P3
10s
10s
[Bug]: Change filament not working Auto-close blank templates #411: Issue #1224 opened by mark4017
10s
10s
[FeatureRequest]: Enforce maximum extrusion rate during printing moves in firmware Auto-close blank templates #410: Issue #1223 opened by timschneider
10s
10s
Reduce stack usage of ExpressionParser::ParseIdentifierExpression in most cases Auto-close blank templates #409: Issue #1222 opened by dc42
8s
8s
Refactor AUX port handling Auto-close blank templates #408: Issue #1221 opened by T3P3
11s
11s
[FeatureRequest]: Configurable order of color channels for LED data Auto-close blank templates #407: Issue #1220 opened by FelixJ-RB
10s
10s
[FeatureRequest]: A failed G28 homing keeps the state "inside homing file" Auto-close blank templates #406: Issue #1219 opened by SilpaSreedharPreetha
8s
8s
DSF has no way to access the second motion system OM fields Auto-close blank templates #405: Issue #1218 opened by AndyEveritt
11s
11s
More accurate position reporting for remote drivers Auto-close blank templates #404: Issue #1217 opened by dc42
9s
9s
Move SharedSpi and SharedI2c drivers into CoreN2G Auto-close blank templates #403: Issue #1216 opened by dc42
9s
9s
Allow the motor current waveforms to be tuned to improve linearity Auto-close blank templates #402: Issue #1215 opened by dc42
9s
9s
[FeatureRequest]: Allow Fan setting to be overridden, ignoring gcode Auto-close blank templates #401: Issue #1213 opened by jaysuk
11s
11s
Add heater watchdog to the expansion board Auto-close blank templates #400: Issue #1212 opened by T3P3
10s
10s
Blocking commands prevent Estop on USB channel Auto-close blank templates #399: Issue #1211 opened by AndyEveritt
9s
9s
Add option to specify an ambient temperature sensor to be used with a heater Auto-close blank templates #398: Issue #1210 opened by dc42
9s
9s
Upgrade FreeRTOS from version 11.0.1 to 11.2.0 Auto-close blank templates #397: Issue #1209 opened by dc42
12s
12s
When using a mixing extruder, OM field move.extruders[n].rawPosition is only updated for the first extruder Auto-close blank templates #396: Issue #1208 opened by dc42
8s
8s
The ability to block of gcode instead of having to comment every line Auto-close blank templates #395: Issue #1206 opened by mark4017
8s
8s
[FeatureRequest]: Support for BiPolar (like a LP player) kinematics Auto-close blank templates #394: Issue #1205 opened by Kenzu
8m 6s
8m 6s