Does NOT download Entware files

[slonce70]

Hey, everybody. Printer k1c - latest firmware installed. I rooted the printer 2 weeks ago and everything was fine. Now also installed - everything installs, all scripts are installed but does not download entware - just hangs on download and that's it. What can be the problem!? Reset has already done 2 times. The problem remains.

I am from Ukraine and it turns out the main domain does not work but the secondary domain works - but it does not connect to it and tries to download from the main domain.

[Guilouz]

Make sure you have access to this URL on your network: https://bin.entware.net/mipselsf-k3.4/

[kuubek55]

Hey, everybody. Printer k1c - latest firmware installed. I rooted the printer 2 weeks ago and everything was fine. Now also installed - everything installs, all scripts are installed but does not download entware - just hangs on download and that's it. What can be the problem!? Reset has already done 2 times. The problem remains.

I am from Ukraine and it turns out the main domain does not work but the secondary domain works - but it does not connect to it and tries to download from the main domain.

Same thing for me, I used VPN on my router

[djjuno]

@Guilouz The main url that you use for Entware has been broken for a while now. https://bin.entware.net/mipselsf-k3.4/ no longer exists. If you edit the script specifically for entware then comment out https://bin.entware.net/mipselsf-k3.4/ and uncomment the second address it will download. I was hoping that someone else would mention this. It's not been working for me for a while now. That was the workaround that I found.

[alvaropsouza]

Thank you, worked for me

[djjuno]

This is off a fresh install that I just did about 5 minutes ago.

If you uncomment "#URL="http://www.openk1.org/static/entware/mipselsf-k3.4/installer" and comment URL="https://bin.entware.net/mipselsf-k3.4/installer" then run the helper script and install Entware. It will install. I think the link for the site is just broken in general.

echo -e "Info: Downloading opkg package manager..."
chmod 755 /usr/data/helper-script/files/fixes/curl
URL="https://bin.entware.net/mipselsf-k3.4/installer"
#URL="http://www.openk1.org/static/entware/mipselsf-k3.4/installer"
/usr/data/helper-script/files/fixes/curl -L "$URL/opkg" -o "/opt/bin/opkg"
/usr/data/helper-script/files/fixes/curl -L "$URL/opkg.conf" -o "/opt/etc/opkg.conf"

[djjuno]

Here are the results once the change is made: