Ender 3v3KE - KAMP

[simonsays10]

I'm trying to set up KAMP, and in the wiki for this - it shows KAMP as option 6 in improvements in the install menu. However the install menu I have is much more limited than what I see in the picture shown. It shows 24 options on the picture, however I only see 17 on mine. Any idea how to get the rest of it? I should have the latest and greatest updates, I know my script is listed as 6.000 etc. on my Orcaslicer. and I'm running .13 firmware. Not sure what other info to add, if anybody asks, I'm more than happy to provide.

[Guilouz]

All features are not available for KE series.

[salami738]

Will this be implemented in the near future for Ender 3v3 KE?

[phatpaul]

Came to ask the same question. Why is KAMP missing from the install menu? I want to know if it Is it kept off for valid reason Before I try to install it manually using the instructions here: https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging
Thanks!

[Hogan1975]

I've got KAMP working fine on two KE's. Go to https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging to install but change commands for installing. Do the first command as normal to Clone from github to root of drive. The next two commands are different because of the location difference in Creality OS version of Klipper vs Vanilla Klipper. You still need to add exclude object in printer.cfg and [file_manager] enable_object_processing: True in the Moonraker.conf.

Then Send this command:
ln -s /root/Klipper-Adaptive-Meshing-Purging/Configuration /usr/data/printer_data/config/KAMP

Then Send this command:
cp /root/Klipper-Adaptive-Meshing-Purging/Configuration/KAMP_Settings.cfg /usr/data/printer_data/config/KAMP_Settings.cfg

Check out Google AI information on different commands to install through the putty software....

https://www.google.com/search?q=ender+3+v3+KE+ln+-s+%7E%2FKlipper-Adaptive-Meshing-Purging%2FConfiguration+printer_data%2Fconfig%2FKAMP&sca_esv=76156e36b6817723&rlz=1C1RXQR_enUS1100US1121&sxsrf=ANbL-n5pMxa-nKKUXAw0TjUdm9D35uk0lQ%3A1769219669618&udm=50&fbs=ADc_l-aN0CWEZBOHjofHoaMMDiKp9lEhFAN_4ain3HSNQWw-mI4C1ELY88XaJ57aZGHEMB0-yG_rbcGKCggd0y127_8yS-tF29BKbhPeQOXvV6o-X4A9ZRgYWyxhD2V5oSWzSAqmOSymlIg7h1v8S9Rw50Gwhe5ca5eQd3lypdEGp_J0RPTGdHo04gpbja8CH3sRJUYhXSzk2gSttlJweKXFGiy4OOo9xg&aep=1&ntc=1&sa=X&ved=2ahUKEwiTsr_viKOSAxUf1fACHcGfBssQ2J8OegQIDxAE&biw=1536&bih=695&dpr=1.25&aic=0&mtid=WyZ0abKlFtiW5OMPt9DV0Qs&mstk=AUtExfBHX5xGWjTQMW78aC4t92yIQ3-k3ywnHxjP_QeN7aiQp-ejm036PcalHTz4bITBOIxyw2gtYgNZ8dOa7b8Bk-JuyZLzimIztv2kyADteEtcG7nofneSIoS_BP3X-Azafy-WSz_TKBGmBVWyn2ukI9RShH3gIoZM1VTSrn99M7KEtGP-BgFXYTI2SobnPJCFBPvlm6iuqsYDqsO1qAbzVJaYaCc6ZKJGlHR5Wj4iVH97ZBDUU8TDsP1qEWlGeusv4EHX7SZgoo6QKa9A50h76AuIfVMT06o988F7ZF3W7ciCwlCQ4kBzWda0W71HB-K7Nk1LylqlP13IwBkuBZaFWuO4jCU4MR6a--hZvZzOKQeyON6NGYFEzU1rrurxVLTbNGpN95NrOv-MZQlQnU_zZpdqYt4hQjXgUdfEu51oQabi8NF7dVXaX9t8-mJuLcwSy37SIZfx6F20ABXG66RpqN4hCmZ4ypM3ws0YETA0XFAJqKsuQzRRG7I5WBvBYILYo91ams2U3U6vHSCLAj8WwF3aPJlh9Kk&csuir=1

[DeNohvo]

is it still working good?

[Hogan1975]

Mines been working great.

[DeNohvo]

any reason why this is missing?

[tabormeister]

I realized with Orca adaptive bed meshing there was no reason to install Kamp so I didn't

[Hogan1975]

I tried the Orca built-in method of adaptive meshing. It lacks the adaptive purging that KAMP does.

[tabormeister]

nah there's orca gcode for that too, I have mine do an adaptive lil line 20mm below the outside left of the print.
https://www.printables.com/model/1035759-adaptive-purge-for-any-3d-printer-using-slicer-var

[Hogan1975]

Glad it's working for ya