ender 5 max support

[Tombraider2006]

so ender 5 max is compatible with our script. after you have done root you can use basic functionality

This is needed first of all to correct several shortcomings in the printer.сfg

need add:

[exclude_object]

to add object exclusion.

change parametrs:

[printer]
kinematics: corexy
max_velocity: 800 
max_accel: 20000# was 100000 incorrect and dangerous
max_accel_to_decel: 10000
max_z_velocity: 30
square_corner_velocity: 5.0
max_z_accel: 300

[Tombraider2006]

[Andrej8181]

Hi.
I'm try to upload rooted firmware but it wont start firmware update.
Screen recognise that usb is insert but wont start to update.
I try with different usb flash drives and sd cards. Any suggestions how to solve this?

[Tombraider2006]

I think you should write about this in zevaryx's git https://github.com/zevaryx/ender-5-max-firmware

[borissommer]

Привет Tombraider, Do you know why there's no heatbed tilt calibration in the Creality helper script? As long as it's not possible via mainsail/fluid, I can't change the Touch to Guppy mode.

I hope there isn't too much snow ;-)

Thanks a lot

[Tombraider2006]

Привет Tombraider, Do you know why there's no heatbed tilt calibration in the Creality helper script? As long as it's not possible via mainsail/fluid, I can't change the Touch to Guppy mode.

I hope there isn't too much snow ;-)

Thanks a lot

Many answers can be found on my GitHub for this printer. I would recommend switching to the Simple AF firmware.

P.S. There is so much snow that it reaches the genitals ))

[borissommer]

;-)) Большое спасибо