Wrong gcode for "Improve hotend cooling" page

[Zecyl]

I noticed, on the page about "Improve hotend cooling" (link), that the gcode said :

[gcode_macro WAIT_TEMP_START]
gcode:
  UPDATE_DELAYED_GCODE ID=wait_temp DURATION=1
  SET_PIN PIN=fan0 VALUE=210
  SET_PIN PIN=fan2 VALUE=210

But, on the page, it says :

By making this change, the hotend fan speed will be reduced to 80% and the side fan will also be enabled at 40%.

But, if I'm not mistaken, the gcode that is on the page sets both fans to 80% (ish). So it should be :

[gcode_macro WAIT_TEMP_START]
gcode:
  UPDATE_DELAYED_GCODE ID=wait_temp DURATION=1
  SET_PIN PIN=fan0 VALUE=204
  SET_PIN PIN=fan2 VALUE=102

[Zecyl]

Made a fork to fix this. Don't know if it's the right way to do this, I'm quite new to the usage of Git and stuff, so sorry if that's not how you suggest a modification.