Group Toggle

[xHirscHx]

So I finally got everything to the way I had it setup on the old firmware except the group toggle. p3 b4 I cant use a scene because the lights are on a Sonoff 4ch pro and if you tried it you know what i mean. Any help would be great
THX.

[aderusha]

I'm not sure if I get what you're after here. Can you make a group and use that as the entity you toggle? Why won't scenes work?

[xHirscHx]

Im looking for something like with the old setup page 3 were button 7 would toggle all lights off if 1 was on . Or toggle all on. I have a group called (den toggle group). The sonoff 4ch pro is hard to set up scenes with because its one device with 4 entries. I've tried before and have had the lights go into a loop (Disco style). I guess i'll give it another go. What i need is to get this to work.

This is what's running anther plate running old firmware

Toggle all light_toggle_group when p[3].b[7] pressed

• alias: hasp_cjs_plate_p3_ToggleAll
  trigger:
  • platform: mqtt
    topic: "hasp/cjs_plate/state/p[3].b[7]"
    payload: "ON"
    action:
  • service: >
    {% if states('group.cjs_light_toggle_group') == "on" -%}
    homeassistant.turn_off
    {%- else -%}
    homeassistant.turn_on
    {%- endif %}
    entity_id: group.cjs_light_toggle_group

Set button 4 to "All Lights Off" if any lights are on, otherwise set to "All Lights On"

• alias: hasp_cjs_plate_p3_ToggleColorAll
  trigger:
  • platform: state
    entity_id: group.cjs_light_toggle_group
  • platform: state
    entity_id: "binary_sensor.cjs_plate_connected"
    to: "on"
  • platform: homeassistant
    event: start
  • platform: state
    entity_id: input_number.hasp_cjs_plate_selectedbackgroundcolor
  • platform: state
    entity_id: input_number.hasp_cjs_plate_unselectedbackgroundcolor
  • platform: state
    entity_id: input_number.hasp_cjs_plate_selectedforegroundcolor
  • platform: state
    entity_id: input_number.hasp_cjs_plate_unselectedforegroundcolor
    action:
  • service: mqtt.publish
    data:
    topic: "hasp/cjs_plate/command/json"
    payload_template: >-
    [{% if states('group.cjs_light_toggle_group') == "on" -%}
    "p[3].b[7].txt="All Lights Off"","p[3].b[7].bco={{ states('input_number.hasp_cjs_plate_unselectedbackgroundcolor') | int }}","p[3].b[7].pco={{ states('input_number.hasp_cjs_plate_unselectedforegroundcolor') | int }}"
    {%- else -%}
    "p[3].b[7].txt="All Lights On"","p[3].b[7].bco={{ states('input_number.hasp_cjs_plate_selectedbackgroundcolor') | int }}","p[3].b[7].pco={{ states('input_number.hasp_cjs_plate_selectedforegroundcolor') | int }}"
    {%- endif %}]

[aderusha]

In that case, I'm pretty confident that a group should give you what you want. Create the group, and have HASPone toggle that group. You can adjust if a group is On if just one of the entities is on, or set it up such that all entities must be on for the group to be on. Toggling a group will set all members to on or off.