chore: comment out hardware configuration for HIL testing

Signed-off-by: Jos Verlinde <Jos_Verlinde@hotmail.com>

Author: Josverl

.env

@@ -25,19 +25,19 @@ MICROPY_DIR=~/micropython
 # HIL testing 
 # -----------------------------------------------------------------------------------------------
 # UF2 - RPI Pico2 on WSL
-MPFLASH_HW_UF2_PORT=/dev/ttyACM1
-MPFLASH_HW_UF2_FW=/mnt/c/Users/jos_v/Downloads/firmware/rp2/RPI_PICO2-v1.28.0.uf2
-
-# DFU - PYBV11 on WSL
-MPFLASH_HW_DFU_PORT=/dev/ttyACM0
-MPFLASH_HW_DFU_FW=/mnt/c/Users/jos_v/Downloads/firmware/stm32/PYBV11-DP-v1.28.0.dfu
-
-# PYOCD - PYBV11 on WSL
-# MPFLASH_HW_PYOCD_PROBE=066CFF514949877187244446
-MPFLASH_HW_PYOCD_PROBE=auto
-MPFLASH_HW_PYOCD_PORT=/dev/ttyACM1
-MPFLASH_HW_PYOCD_FW=/mnt/c/Users/jos_v/Downloads/firmware/stm32/PYBV11-DP-v1.28.0.hex
-
-# esptool - ESP32 on WSL
-MPFLASH_HW_ESP_PORT=/dev/ttyUSB0
-MPFLASH_HW_ESP_FW=/mnt/c/Users/jos_v/Downloads/firmware/esp32/ESP32_GENERIC-SPIRAM-v1.28.0.bin
+# MPFLASH_HW_UF2_PORT=/dev/ttyACM1
+# MPFLASH_HW_UF2_FW=/mnt/c/Users/jos_v/Downloads/firmware/rp2/RPI_PICO2-v1.28.0.uf2
+
+# # DFU - PYBV11 on WSL
+# MPFLASH_HW_DFU_PORT=/dev/ttyACM0
+# MPFLASH_HW_DFU_FW=/mnt/c/Users/jos_v/Downloads/firmware/stm32/PYBV11-DP-v1.28.0.dfu
+
+# # PYOCD - PYBV11 on WSL
+# # MPFLASH_HW_PYOCD_PROBE=066CFF514949877187244446
+# MPFLASH_HW_PYOCD_PROBE=auto
+# MPFLASH_HW_PYOCD_PORT=/dev/ttyACM1
+# MPFLASH_HW_PYOCD_FW=/mnt/c/Users/jos_v/Downloads/firmware/stm32/PYBV11-DP-v1.28.0.hex
+
+# # esptool - ESP32 on WSL
+# MPFLASH_HW_ESP_PORT=/dev/ttyUSB0
+# MPFLASH_HW_ESP_FW=/mnt/c/Users/jos_v/Downloads/firmware/esp32/ESP32_GENERIC-SPIRAM-v1.28.0.bin