H.40 Miru LTS milestone 4.14.190 - #1
Merged
Merged
Conversation
[ Upstream commit ed7815db70d17b1741883f2da8e1d80bc2efe517 ] A SPI transfer defines the _maximum_ speed of the SPI transfer. However the driver doesn't take into account that the clock divider is always rounded down (due to integer arithmetics). This results in a too high clock rate for the SPI transfer. E.g.: with a mclk_rate of 24 MHz and a SPI transfer speed of 10 MHz, the original code calculates a reg of "0", which results in a effective divider of "2" and a 12 MHz clock for the SPI transfer. This patch fixes the issue by using DIV_ROUND_UP() instead of a plain integer division. While there simplify the divider calculation for the CDR1 case, use order_base_2() instead of two ilog2() calculations. Fixes: 3558fe9 ("spi: sunxi: Add Allwinner A31 SPI controller driver") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200706143443.9855-2-mkl@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30517ffeb3bff842e1355cbc32f1959d9dbb5414 ] Fixed commit moved the assignment of 'req', but did not update a reference in the DBG() call. Use the argument as it was renamed. Fixes: 5fb694f ("usb: gadget: udc: atmel: fix possible oops when unloading module") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef75e14a6c935eec82abac07ab68e388514e39bc ] This code reads from the array before verifying that "trig" is a valid index. If the index is wildly out of bounds then reading from an invalid address could lead to an Oops. Fixes: a8c66b6 ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200709102936.GA20875@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8f62f183021be389561570ab5f8c701a5e70298 ] This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 The above patch is supposed to fix a register index error on mt2701. It is not clear if the problem solved is a hang or just an invalid value returned, my guess is the second. The patch introduces, though, a new hang on MT8173 device making them unusable. So, seems reasonable, revert the patch because introduces a worst issue. The reason I send a revert instead of trying to fix the issue for MT8173 is because the information needed to fix the issue is in the datasheet and is not public. So I am not really able to fix it. Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173 devices. [ 2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001 [ 2.230421] Mem abort info: [ 2.233207] ESR = 0x96000021 [ 2.236261] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.241571] SET = 0, FnV = 0 [ 2.244623] EA = 0, S1PTW = 0 [ 2.247762] Data abort info: [ 2.250640] ISV = 0, ISS = 0x00000021 [ 2.254473] CM = 0, WnR = 0 [ 2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000 [ 2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707 [ 2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 2.280432] Modules linked in: [ 2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162 [ 2.289914] Hardware name: Google Elm (DT) [ 2.294003] pstate: 20000005 (nzCv daif -PAN -UAO) [ 2.298792] pc : mtk_read_temp+0xb8/0x1c8 [ 2.302793] lr : mtk_read_temp+0x7c/0x1c8 [ 2.306794] sp : ffff80001003b930 [ 2.310100] x29: ffff80001003b930 x28: 0000000000000000 [ 2.315404] x27: 0000000000000002 x26: ffff0000f9550b10 [ 2.320709] x25: ffff0000f9550a80 x24: 0000000000000090 [ 2.326014] x23: ffff80001003ba24 x22: 00000000610344c0 [ 2.331318] x21: 0000000000002710 x20: 00000000000001f4 [ 2.336622] x19: 0000000000030d40 x18: ffff800011742ec0 [ 2.341926] x17: 0000000000000001 x16: 0000000000000001 [ 2.347230] x15: ffffffffffffffff x14: ffffff0000000000 [ 2.352535] x13: ffffffffffffffff x12: 0000000000000028 [ 2.357839] x11: 0000000000000003 x10: ffff800011295ec8 [ 2.363143] x9 : 000000000000291b x8 : 0000000000000002 [ 2.368447] x7 : 00000000000000a8 x6 : 0000000000000004 [ 2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0 [ 2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001 [ 2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80 [ 2.389665] Call trace: [ 2.392105] mtk_read_temp+0xb8/0x1c8 [ 2.395760] of_thermal_get_temp+0x2c/0x40 [ 2.399849] thermal_zone_get_temp+0x78/0x160 [ 2.404198] thermal_zone_device_update.part.0+0x3c/0x1f8 [ 2.409589] thermal_zone_device_update+0x34/0x48 [ 2.414286] of_thermal_set_mode+0x58/0x88 [ 2.418375] thermal_zone_of_sensor_register+0x1a8/0x1d8 [ 2.423679] devm_thermal_zone_of_sensor_register+0x64/0xb0 [ 2.429242] mtk_thermal_probe+0x690/0x7d0 [ 2.433333] platform_drv_probe+0x5c/0xb0 [ 2.437335] really_probe+0xe4/0x448 [ 2.440901] driver_probe_device+0xe8/0x140 [ 2.445077] device_driver_attach+0x7c/0x88 [ 2.449252] __driver_attach+0xac/0x178 [ 2.453082] bus_for_each_dev+0x78/0xc8 [ 2.456909] driver_attach+0x2c/0x38 [ 2.460476] bus_add_driver+0x14c/0x230 [ 2.464304] driver_register+0x6c/0x128 [ 2.468131] __platform_driver_register+0x50/0x60 [ 2.472831] mtk_thermal_driver_init+0x24/0x30 [ 2.477268] do_one_initcall+0x50/0x298 [ 2.481098] kernel_init_freeable+0x1ec/0x264 [ 2.485450] kernel_init+0x1c/0x110 [ 2.488931] ret_from_fork+0x10/0x1c [ 2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042) [ 2.498599] ---[ end trace e43e3105ed27dc99 ]--- [ 2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.511020] SMP: stopping secondary CPUs [ 2.514941] Kernel Offset: disabled [ 2.518421] CPU features: 0x090002,25006005 [ 2.522595] Memory Limit: none [ 2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]-- Cc: Michael Kao <michael.kao@mediatek.com> Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7adfe5ffed9faa05f8926223086b101e14f700d ]
Fix dtschema validator warnings like:
l2-cache@fffff000: $nodename:0:
'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Fixes: 475dc86 ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5714ee50bb4375bd586858ad800b1d9772847452 upstream.
This fixes a regression encountered while running the
gdb.base/corefile.exp test in GDB's test suite.
In my testing, the typo prevented the sw_reserved field of struct
fxregs_state from being output to the kernel XSAVES area. Thus the
correct mask corresponding to XCR0 was not present in the core file for
GDB to interrogate, resulting in the following behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core
Reading symbols from testsuite/outputs/gdb.base/corefile/corefile...
[New LWP 232880]
warning: Unexpected size of section `.reg-xstate/232880' in core file.
With the typo fixed, the test works again as expected.
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Fixes: 9e4636545933 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
… mode commit 0e0bf1ea1147fcf74eab19c2d3c853cc3740a72f upstream. As the code comments in perf_stat_process_counter() say, we calculate counter's data every interval, and the display code shows ps->res_stats avg value. We need to zero the stats for interval mode. But the current code only zeros the res_stats[0], it doesn't zero the res_stats[1] and res_stats[2], which are for ena and run of counter. This patch zeros the whole res_stats[] for interval mode. Fixes: 51fd2df ("perf stat: Fix interval output values") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d3fb3c5be9ce07fa85d8f67fb3922e4613b955b upstream. Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 383fc3f613e7eac9f2e3c13b6f9fb8c1f39cb9d5 upstream. All initialized and registered devices should be listed somewhere so that we can unregister/free them in the _remove() path. This patch is not a fix per-se but is needed to apply three other fixes coming right after, explaining the Fixes/Cc: stable tags. Fixes: 6685924 ("mtd: nand: Add OX820 NAND Support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-36-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b60391eb17b2956ff2fc4c348e5a464da21ff9cb upstream. On error, the oxnas probe path just frees the device which failed and aborts the probe, leaving unreleased resources. Fix this situation by calling mtd_device_unregister()/nand_cleanup() on these. Fixes: 6685924 ("mtd: nand: Add OX820 NAND Support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-38-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a5f45e57e35d0840bedb816974ce2e63406cd8b upstream. oxnans_nand_remove() should release all MTD devices and clean all NAND devices, not only the first one registered. Fixes: 6685924 ("mtd: nand: Add OX820 NAND Support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-39-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6363d2065cd399cf9d6dc9d08c437f8658831100 upstream. Neither the trackpad, nor the mouse want input core to generate autorepeat events for their buttons, so let's reset the bit (as hid-input sets it for these devices based on the usage vendor code). Cc: stable@vger.kernel.org Reported-by: Yariv <oigevald+kernel@gmail.com> Tested-by: Yariv <oigevald+kernel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e8a914ad619042c5f25a4feb663357c4170fd8d upstream. LINE6 drivers create stream URBs with a fixed pipe without checking its validity, and this may lead to a kernel WARNING at the submission when a malformed USB descriptor is passed. For avoiding the kernel warning, perform the similar sanity checks for each pipe type at creating a URB. Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b7e5208a941e2e491a83eb5fa83d889e888fa2f upstream. USB MIDI driver has an error recovery mechanism to resubmit the URB in the delayed timer handler, and this may race with the standard start / stop operations. Although both start and stop operations themselves don't race with each other due to the umidi->mutex protection, but this isn't applied to the timer handler. For fixing this potential race, the following changes are applied: - Since the timer handler can't use the mutex, we apply the umidi->disc_lock protection at each input stream URB submission; this also needs to change the GFP flag to GFP_ATOMIC - Add a check of the URB refcount and skip if already submitted - Move the timer cancel call at disconnection to the beginning of the procedure; this assures the in-flight timer handler is gone properly before killing all pending URBs Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 211f08347355cba1f769bbf3355816a12b3ddd55 upstream.
clang static analysis flags this error
c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc]
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
^~~~~~~~~~~~
Problem happens in this block of code
c67x00_release_urb(c67x00, urb);
usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
spin_unlock(&c67x00->lock);
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
In the call to c67x00_release_urb has this freeing of urbp
urbp = urb->hcpriv;
urb->hcpriv = NULL;
list_del(&urbp->hep_node);
kfree(urbp);
And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd
parameter.
Since all is required is the status, pass the status directly as is
done in c64x00_urb_dequeue
Fixes: e9b29ff ("USB: add Cypress c67x00 OTG controller HCD driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fdf228cdf6925af45a2066d403821e0977bfddb upstream. To avoid lot of interrupts from dwc2 core, which can be asserted in specific conditions need to disable interrupts on HW level instead of disable IRQs on Kernel level, because of IRQ can be shared between drivers. Cc: stable@vger.kernel.org Fixes: a40a003 ("usb: dwc2: add shutdown callback to platform variant") Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 876d4e1e8298ad1f94d9e9392fc90486755437b4 upstream. If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: <stable@vger.kernel.org> Fixes: 3ecb3e0 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by: Philippe Schenker <philippe.schenker@toradex.com> Tested-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8778eb0927ddcd3f431805c37b78fa56481aeed9 upstream. Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time. Fixes: c6994e6 ("USB: gadget: add USB Audio Gadget driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7b931bee739e8a77ae216e613d3b99342b6dec0 upstream. The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c45d04c5081c1830d674f4d22d4400ea2083afe upstream. This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d0136f8e79f8287e6a36780601f0ce797cf11c2 upstream. Add PID for CH340 that's found on some ESP8266 dev boards made by LilyGO. The specific device that contains such serial converter can be seen here: https://github.com/LilyGO/LILYGO-T-OI. Apparently, it's a regular CH340, but I've confirmed with others that also bought this board that the PID found on this device (0x7522) differs from other devices with the "same" converter (0x7523). Simply adding its PID to the driver and rebuilding it made it work as expected. Signed-off-by: Igor Moura <imphilippini@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08d4ef5cc9203a113702f24725f6cf4db476c958 upstream. Add USB IDs for GosunCn GM500 series cellular modules. RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da6902e5b6dbca9081e3d377f9802d4fd0c5ea59 upstream. Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…erial commit 897c44f0bae574c5fb318c759b060bebf9dd6013 upstream. rproc_serial_id_table lacks an exposure to module devicetable, so when remoteproc firmware requests VIRTIO_ID_RPROC_SERIAL, no uevent is generated and no module autoloading occurs. Add missing MODULE_DEVICE_TABLE() annotation and move the existing one for VIRTIO_ID_CONSOLE right to the table itself. Fixes: 1b63704 ("virtio_console: Add support for remoteproc serial") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Amit Shah <amit@kernel.org> Link: https://lore.kernel.org/r/x7C_CbeJtoGMy258nwAXASYz3xgFMFpyzmUvOyZzRnQrgWCREBjaqBOpAUS7ol4NnZYvSVwmTsCG0Ohyfvta-ygw6HMHcoeKK0C3QFiAO_Q=@pm.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31070f6ccec09f3bd4f1e28cd1e592fa4f3ba0b6 upstream. The ioctl encoding for this parameter is a long but the documentation says it should be an int and the kernel drivers expect it to be an int. If the fuse driver treats this as a long it might end up scribbling over the stack of a userspace process that only allocated enough space for an int. This was previously discussed in [1] and a patch for fuse was proposed in [2]. From what I can tell the patch in [2] was nacked in favor of adding new, "fixed" ioctls and using those from userspace. However there is still no "fixed" version of these ioctls and the fact is that it's sometimes infeasible to change all userspace to use the new one. Handling the ioctls specially in the fuse driver seems like the most pragmatic way for fuse servers to support them without causing crashes in userspace applications that call them. [1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/ [2]: https://sourceforge.net/p/fuse/mailman/message/31771759/ Signed-off-by: Chirantan Ekbote <chirantan@chromium.org> Fixes: 59efec7 ("fuse: implement ioctl support") Cc: <stable@vger.kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 853eab68afc80f59f36bbdeb715e5c88c501e680 upstream. Turns out that the permissions for 0400 really are what we want here, otherwise any user can read from this file. [fixed formatting, added changelog, and made attribute static - gregkh] Reported-by: Wade Mealing <wmealing@redhat.com> Cc: stable <stable@vger.kernel.org> Fixes: f40609d ("zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1847832 Reviewed-by: Steffen Maier <maier@linux.ibm.com> Acked-by: Minchan Kim <minchan@kernel.org> Link: https://lore.kernel.org/r/20200617114946.GA2131650@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e852c2c251ed9c23ae6e3efebc5ec49adb504207 upstream. It's not needed to set driver to NULL in mei_cl_device_remove() which is bus_type remove() handler as this is done anyway in __device_release_driver(). Actually this is causing an endless loop in driver_detach() on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module. The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty. as the check is always true in __device_release_driver() if (dev->driver != drv) return; The non upstream patch is causing this behavior, titled: 'vfio -- release device lock before userspace requests' Nevertheless the fix is correct also for the upstream. Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/ Cc: <stable@vger.kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17d51429da722cd8fc77a365a112f008abf4f8b3 upstream. This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by: David Pedersen <limero1337@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf12fdf0ab728ca8e5933aac46dd972c0dd0421e upstream. While e3a3c3a ("UIO: fix uio_pdrv_genirq with device tree but no interrupt") added support for using uio_pdrv_genirq for devices without interrupt for device tree platforms, the removal of uio_pdrv in 26dac3c ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") broke the support for non device tree platforms. This change fixes this, so that uio_pdrv_genirq can be used without interrupt on all platforms. This still leaves the support that uio_pdrv had for custom interrupt handler lacking, as uio_pdrv_genirq does not handle it (yet). Fixes: 26dac3c ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") Signed-off-by: Esben Haabendal <esben@geanix.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2a71bdea81690b6ef11f4368261ec6f5b6891aa upstream. When an expiration delta falls into the last level of the wheel, that delta has be compared against the maximum possible delay and reduced to fit in if necessary. However instead of comparing the delta against the maximum, the code compares the actual expiry against the maximum. Then instead of fixing the delta to fit in, it sets the maximum delta as the expiry value. This can result in various undesired outcomes, the worst possible one being a timer expiring 15 days ahead to fire immediately. Fixes: 500462a ("timers: Switch to a non-cascading wheel") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Owner
Author
|
Clean GitHub Actions build succeeded for The previous four Validated outputs:
Workflow run: |
KAI-Miru
changed the title
KAI-Miru
marked this pull request as ready for review
July 19, 2026 08:59
Owner
Author
|
Final validation complete for
The milestone is ready to merge into |
Owner
Author
|
Post-merge production validation complete.
Obsolete integration branches and the companion repository's v2 modules branch were removed after ancestry verification. |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Summary
Integrate Android/Linux stable 4.14.181 through 4.14.190 into the tested Miru H.40 kernel while preserving the OnePlus/Qualcomm hardware architecture, ColorOS ABI and existing Miru compatibility fixes.
The integration retains the upstream Android stable history through the two-parent merge scaffold rather than flattening it.
Integration result
4.14.1904.14.190-miru-h40-lts190-ci1+miru-h40Documentation/miru/lts-4.14.190-conflicts.mdValidation
git diff --checkFinal cleanup head
6fca0a481f79fc5737bbea218e2bb6033a846261passed Miru H.40 kernel and external modules run #3 (run ID29680812357). The run uploaded the kernel build, kernel diagnostics, Miru v3 module drop-in package and module diagnostics.Merge policy
Use Create a merge commit. Do not squash or rebase: the 1,197-commit history is the preserved Android stable lineage needed for future LTS maintenance.