What happened?
The Devices do not update the "Power - Instantaneous measured power" after switching off.
I have 2 manually refresh the state from the frontend.
When switching on there seem 2 be no problem @ALL... it's only happening by turning this smart plug off.
What did you expect to happen?
No response
How to reproduce it (minimal and precise)
turn the smart plug on, wait for some power measurement and then simply turn it off again...
the power measurement does not go to 0 W.
Zigbee2MQTT version
2.12.0
Adapter firmware version
20250321
Adapter
SLZB-MR1
Setup
docker container
in debian VM
x86-64 proxmox host
i9500
Device database.db entry
{"id":47,"type":"Router","ieeeAddr":"0xa4c138946fc3c493","nwkAddr":15866,"manufId":4454,"manufName":"innr","powerSource":"Mains (single phase)","modelId":"SP 240","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":266,"inClusterList":[0,3,4,5,6,8,4096,1794,2820,57345],"outClusterList":[10,25],"clusters":{"genBasic":{"attributes":{"modelId":"SP 240","manufacturerName":"innr","powerSource":1,"zclVersion":8,"appVersion":25,"stackVersion":54,"hwVersion":2,"dateCode":"20250418","swBuildId":"1.9.34"}},"genOnOff":{"attributes":{"startUpOnOff":255,"onOff":1}},"haElectricalMeasurement":{"attributes":{"activePower":1,"rmsVoltage":244,"rmsCurrent":38,"acPowerDivisor":1,"acPowerMultiplier":1,"acCurrentDivisor":1000,"acCurrentMultiplier":1,"acVoltageDivisor":1,"acVoltageMultiplier":1}},"seMetering":{"attributes":{"currentSummDelivered":96,"divisor":1000,"multiplier":1}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0028d6ab73","endpointID":1},{"cluster":2820,"type":"endpoint","deviceIeeeAddress":"0x00124b0028d6ab73","endpointID":1},{"cluster":1794,"type":"endpoint","deviceIeeeAddress":"0x00124b0028d6ab73","endpointID":1}],"configuredReportings":[{"cluster":6,"attrId":0,"minRepIntval":0,"maxRepIntval":65000,"repChange":1},{"cluster":2820,"attrId":1291,"minRepIntval":10,"maxRepIntval":65000,"repChange":5},{"cluster":2820,"attrId":1288,"minRepIntval":10,"maxRepIntval":65000,"repChange":50},{"cluster":2820,"attrId":1285,"minRepIntval":10,"maxRepIntval":65000,"repChange":5},{"cluster":1794,"attrId":0,"minRepIntval":10,"maxRepIntval":65000,"repChange":100}],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":25,"stackVersion":54,"hwVersion":2,"dateCode":"20250418","swBuildId":"1.9.34","zclVersion":8,"interviewCompleted":true,"interviewState":"SUCCESSFUL","meta":{"configured":"0.0.1"},"lastSeen":1782764734757}
Debug log
[2026-06-29 22:31:37] info: z2m:mqtt: MQTT publish: topic 'd-main/Trockner/Klima', payload '{"current":0,"energy":3.02,"linkquality":65,"power":4,"power_on_behavior":"previous","state":"OFF","update":{"installed_version":421672581,"latest_release_notes":null,"latest_source":"https://raw.githubusercontent.com/Koenkk/zigbee-OTA/master/images/Innr/1166-0334-191e3685-sp240v2-1.9.30.ota","latest_version":421410437,"state":"idle"},"voltage":241}'
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: <-- [254,5,69,196,17,205,1,55,175,193]
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --- parseNext [254,5,69,196,17,205,1,55,175,193]
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --> parsed 5 - 2 - 5 - 196 - [17,205,1,55,175] - 193
[2026-06-29 22:31:38] debug: zh:zstack:znp: <-- AREQ: ZDO - srcRtgInd
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --- parseNext []
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: <-- [254,28,68,129,0,0,1,2,17,205,1,1,0,109,0,61,229,88,0,0,8,24,216,10,0,0,41,200,10,55,175,28,70]
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --- parseNext [254,28,68,129,0,0,1,2,17,205,1,1,0,109,0,61,229,88,0,0,8,24,216,10,0,0,41,200,10,55,175,28,70]
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --> parsed 28 - 2 - 4 - 129 - [0,0,1,2,17,205,1,1,0,109,0,61,229,88,0,0,8,24,216,10,0,0,41,200,10,55,175,28] - 70
[2026-06-29 22:31:38] debug: zh:zstack:znp: <-- AREQ: AF - incomingMsg - {"groupid":0,"clusterid":513,"srcaddr":52497,"srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"linkquality":109,"securityuse":0,"timestamp":5825853,"transseqnumber":0,"len":8,"data":{"type":"Buffer","data":[24,216,10,0,0,41,200,10]}}
[2026-06-29 22:31:38] debug: zh:controller: Received payload: clusterID=513, address=52497, groupID=0, endpoint=1, destinationEndpoint=1, wasBroadcast=false, linkQuality=109, frame={"header":{"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0},"transactionSequenceNumber":216,"commandIdentifier":10},"payload":[{"attrId":0,"dataType":41,"attrData":2760}],"command":{"name":"report","ID":10}}
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --- parseNext []
Notes
No response
What happened?
The Devices do not update the "Power - Instantaneous measured power" after switching off.
I have 2 manually refresh the state from the frontend.
When switching on there seem 2 be no problem @ALL... it's only happening by turning this smart plug off.
What did you expect to happen?
No response
How to reproduce it (minimal and precise)
turn the smart plug on, wait for some power measurement and then simply turn it off again...
the power measurement does not go to 0 W.
Zigbee2MQTT version
2.12.0
Adapter firmware version
20250321
Adapter
SLZB-MR1
Setup
docker container
in debian VM
x86-64 proxmox host
i9500
Device
database.dbentry{"id":47,"type":"Router","ieeeAddr":"0xa4c138946fc3c493","nwkAddr":15866,"manufId":4454,"manufName":"innr","powerSource":"Mains (single phase)","modelId":"SP 240","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":266,"inClusterList":[0,3,4,5,6,8,4096,1794,2820,57345],"outClusterList":[10,25],"clusters":{"genBasic":{"attributes":{"modelId":"SP 240","manufacturerName":"innr","powerSource":1,"zclVersion":8,"appVersion":25,"stackVersion":54,"hwVersion":2,"dateCode":"20250418","swBuildId":"1.9.34"}},"genOnOff":{"attributes":{"startUpOnOff":255,"onOff":1}},"haElectricalMeasurement":{"attributes":{"activePower":1,"rmsVoltage":244,"rmsCurrent":38,"acPowerDivisor":1,"acPowerMultiplier":1,"acCurrentDivisor":1000,"acCurrentMultiplier":1,"acVoltageDivisor":1,"acVoltageMultiplier":1}},"seMetering":{"attributes":{"currentSummDelivered":96,"divisor":1000,"multiplier":1}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0028d6ab73","endpointID":1},{"cluster":2820,"type":"endpoint","deviceIeeeAddress":"0x00124b0028d6ab73","endpointID":1},{"cluster":1794,"type":"endpoint","deviceIeeeAddress":"0x00124b0028d6ab73","endpointID":1}],"configuredReportings":[{"cluster":6,"attrId":0,"minRepIntval":0,"maxRepIntval":65000,"repChange":1},{"cluster":2820,"attrId":1291,"minRepIntval":10,"maxRepIntval":65000,"repChange":5},{"cluster":2820,"attrId":1288,"minRepIntval":10,"maxRepIntval":65000,"repChange":50},{"cluster":2820,"attrId":1285,"minRepIntval":10,"maxRepIntval":65000,"repChange":5},{"cluster":1794,"attrId":0,"minRepIntval":10,"maxRepIntval":65000,"repChange":100}],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":25,"stackVersion":54,"hwVersion":2,"dateCode":"20250418","swBuildId":"1.9.34","zclVersion":8,"interviewCompleted":true,"interviewState":"SUCCESSFUL","meta":{"configured":"0.0.1"},"lastSeen":1782764734757}
Debug log
[2026-06-29 22:31:37] info: z2m:mqtt: MQTT publish: topic 'd-main/Trockner/Klima', payload '{"current":0,"energy":3.02,"linkquality":65,"power":4,"power_on_behavior":"previous","state":"OFF","update":{"installed_version":421672581,"latest_release_notes":null,"latest_source":"https://raw.githubusercontent.com/Koenkk/zigbee-OTA/master/images/Innr/1166-0334-191e3685-sp240v2-1.9.30.ota","latest_version":421410437,"state":"idle"},"voltage":241}'
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: <-- [254,5,69,196,17,205,1,55,175,193]
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --- parseNext [254,5,69,196,17,205,1,55,175,193]
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --> parsed 5 - 2 - 5 - 196 - [17,205,1,55,175] - 193
[2026-06-29 22:31:38] debug: zh:zstack:znp: <-- AREQ: ZDO - srcRtgInd
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --- parseNext []
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: <-- [254,28,68,129,0,0,1,2,17,205,1,1,0,109,0,61,229,88,0,0,8,24,216,10,0,0,41,200,10,55,175,28,70]
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --- parseNext [254,28,68,129,0,0,1,2,17,205,1,1,0,109,0,61,229,88,0,0,8,24,216,10,0,0,41,200,10,55,175,28,70]
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --> parsed 28 - 2 - 4 - 129 - [0,0,1,2,17,205,1,1,0,109,0,61,229,88,0,0,8,24,216,10,0,0,41,200,10,55,175,28] - 70
[2026-06-29 22:31:38] debug: zh:zstack:znp: <-- AREQ: AF - incomingMsg - {"groupid":0,"clusterid":513,"srcaddr":52497,"srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"linkquality":109,"securityuse":0,"timestamp":5825853,"transseqnumber":0,"len":8,"data":{"type":"Buffer","data":[24,216,10,0,0,41,200,10]}}
[2026-06-29 22:31:38] debug: zh:controller: Received payload: clusterID=513, address=52497, groupID=0, endpoint=1, destinationEndpoint=1, wasBroadcast=false, linkQuality=109, frame={"header":{"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0},"transactionSequenceNumber":216,"commandIdentifier":10},"payload":[{"attrId":0,"dataType":41,"attrData":2760}],"command":{"name":"report","ID":10}}
[2026-06-29 22:31:38] debug: zh:zstack:unpi:parser: --- parseNext []
Notes
No response