Translated using Weblate (Polish)

Currently translated at 57.6% (242 of 420 strings)

Translated using Weblate (German)

Currently translated at 99.5% (418 of 420 strings)

Translated using Weblate (French)

Currently translated at 49.2% (207 of 420 strings)

Translated using Weblate (Serbian)

Currently translated at 47.3% (199 of 420 strings)

Translated using Weblate (Czech)

Currently translated at 85.0% (357 of 420 strings)

Co-authored-by: Anonymous <noreply@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/linuxcnc/gmocappy/cs/
Translate-URL: https://hosted.weblate.org/projects/linuxcnc/gmocappy/de/
Translate-URL: https://hosted.weblate.org/projects/linuxcnc/gmocappy/fr/
Translate-URL: https://hosted.weblate.org/projects/linuxcnc/gmocappy/pl/
Translate-URL: https://hosted.weblate.org/projects/linuxcnc/gmocappy/sr/
Translation: LinuxCNC/LinuxCNC/Gmocappy

Author: weblate

src/po/gmoccapy/cs.po

@@ -8,17 +8,17 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"Report-Msgid-Bugs-To: \n"
+"Report-Msgid-Bugs-To: emc-developers@lists.sourceforge.net\n"
 "POT-Creation-Date: 2026-04-16 19:18+0200\n"
-"PO-Revision-Date: 2026-02-01 23:04+0000\n"
-"Last-Translator: Steffen Möller <steffen_moeller@gmx.de>\n"
+"PO-Revision-Date: 2026-05-14 09:29+0000\n"
+"Last-Translator: Anonymous <noreply@weblate.org>\n"
 "Language-Team: \n"
 "Language: cs\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=3; plural=((n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2);\n"
-"X-Generator: Weblate 5.16-dev\n"
+"X-Generator: Weblate 2026.5.dev0\n"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.py:272
 msgid "user mode selected"
@@ -151,6 +151,7 @@ msgid "Press to set touch off value for axis {0}"
 msgstr "Nastavit nulový bod souřadného systému pro osu {0}"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.py:1060
+#, fuzzy
 msgid ""
 " Block\n"
 "Height"
@@ -195,7 +196,7 @@ msgid "Press to jog axis {0}"
 msgstr "stiskni pro pohyb osy {0}"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.py:1299
-#, python-brace-format
+#, fuzzy, python-brace-format
 msgid "Press to jog joint {0}"
 msgstr ""
 "Stiskni k manuálnímu\n"
@@ -647,6 +648,7 @@ msgid "Conversion error in btn_set_value!"
 msgstr "Konverzní chyba v btn_set_value!"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.py:4919
+#, fuzzy
 msgid "Please enter only numerical values. Values have not been applied"
 msgstr "Používejte prosím jen číselné hodnoty. Hodnota nebyla použita."
 
@@ -676,6 +678,7 @@ msgid "Conversion error in btn_block_height!"
 msgstr "Konverzní chyba v btn_block_height!"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.py:5004
+#, fuzzy
 msgid ""
 "Please enter only numerical values\n"
 "Values have not been applied"
@@ -829,6 +832,7 @@ msgid "Selected tool is already in spindle, no change needed."
 msgstr "Zvolený nástroj je již ve vřeteni. Výměna nástroje nenastane."
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.py:5712
+#, fuzzy
 msgid ""
 "you selected no or more than one tool, the tool selection must be unique"
 msgstr ""
@@ -926,6 +930,7 @@ msgstr ""
 "nekomentovaný výběr"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:3
+#, fuzzy
 msgid "pause the running program"
 msgstr ""
 "pozastavit / pokračovat \n"
@@ -1070,6 +1075,7 @@ msgid "Replace:"
 msgstr "Nahradit:"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:38
+#, fuzzy
 msgid "Information over the tool in spindle"
 msgstr ""
 "Informace o nástroji ve vřeteni,\n"
@@ -1282,18 +1288,21 @@ msgid "<b>Jog Area</b>"
 msgstr "<b>Jog - Manuální mód</b>"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:90
+#, fuzzy
 msgid "Relative Color"
 msgstr ""
 "Relativní\n"
 "odměřování"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:91
+#, fuzzy
 msgid "Absolute Color"
 msgstr ""
 "Absolutní\n"
 "odměřování"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:92
+#, fuzzy
 msgid "DTG Color"
 msgstr ""
 "DTG\n"
@@ -1328,6 +1337,7 @@ msgstr ""
 "klikáním na DRO"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:99
+#, fuzzy
 msgid "<b>DRO</b>"
 msgstr ""
 "<b>DRO - zobrazování pozice,\n"
@@ -1352,6 +1362,7 @@ msgid "Show offsets"
 msgstr "Zobrazit souřadné systémy"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:104
+#, fuzzy
 msgid "Show DTG"
 msgstr ""
 "Zobrazit DTG\n"
@@ -1655,10 +1666,12 @@ msgid "Starting RPM"
 msgstr "Výchozí otáčky/min"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:176
+#, fuzzy
 msgid "Spindle bar min"
 msgstr "Vřeteno-ukazatel min."
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:177
+#, fuzzy
 msgid "Spindle bar max"
 msgstr "Vřeteno-ukazatel max."
 
@@ -1703,10 +1716,12 @@ msgid "<b>Probe Information</b>"
 msgstr "<b>Informace o sondě</b>"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:188
+#, fuzzy
 msgid "Search Vel."
 msgstr "Rychlost hledání"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:189
+#, fuzzy
 msgid "Probe Vel."
 msgstr "Rychlost sondy"
 
@@ -1733,6 +1748,7 @@ msgid "<b>Tool Measurement</b>"
 msgstr "<b>Měření nástroje</b>"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:197
+#, fuzzy
 msgid "Reload Tool on Start"
 msgstr ""
 "Znovu načíst nástroj\n"
@@ -1754,6 +1770,7 @@ msgstr ""
 "korekce délky nástroje bude načtena.\n"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:204
+#, fuzzy
 msgid ""
 "You use NO_FORCE_HOMING,\n"
 "so the reload of a tool at start\n"
@@ -1807,6 +1824,7 @@ msgstr ""
 "[F2]"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:216
+#, fuzzy
 msgid ""
 "enter manual mode to jog axis by hand or touch off\n"
 "[F3]"
@@ -1825,6 +1843,7 @@ msgstr ""
 "[F5]"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:220
+#, fuzzy
 msgid "enter auto mode to run programs"
 msgstr ""
 "automatický mód ke spouštění,\n"
@@ -1893,6 +1912,7 @@ msgid "Stop the running program"
 msgstr "ukončit běžící program"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:236
+#, fuzzy
 msgid "Pause the running program"
 msgstr ""
 "pozastavit / pokračovat \n"
@@ -1957,6 +1977,7 @@ msgid "Hal-Scope"
 msgstr "Hal-Scope"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:248
+#, fuzzy
 msgid "launch hal scope"
 msgstr ""
 "spustit osciloskop\n"
@@ -1991,6 +2012,7 @@ msgid "Halshow"
 msgstr "Halshow"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:256
+#, fuzzy
 msgid "opens the show hal tool"
 msgstr ""
 "spustit nástroj na zobrazení\n"
@@ -2027,12 +2049,14 @@ msgid "Go back to main button list"
 msgstr "vrátit se do hlavní záložky tlačítek"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:264
+#, fuzzy
 msgid "Select a tool by number"
 msgstr ""
 "zvolit nástroj\n"
 "zadáním jeho čísla"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:265
+#, fuzzy
 msgid "change tool with the command M61 Q?, no machine move will be done"
 msgstr ""
 "zvolit vybraný nástroj\n"

src/po/gmoccapy/de.po

@@ -9,16 +9,16 @@ msgstr ""
 "Project-Id-Version: gmoccapy\n"
 "Report-Msgid-Bugs-To: emc-developers@lists.sourceforge.net\n"
 "POT-Creation-Date: 2026-04-16 19:18+0200\n"
-"PO-Revision-Date: 2026-04-16 18:47+0000\n"
-"Last-Translator: Hans Unzner <hansunzner@gmail.com>\n"
+"PO-Revision-Date: 2026-05-14 09:29+0000\n"
+"Last-Translator: Anonymous <noreply@weblate.org>\n"
 "Language-Team: German <https://hosted.weblate.org/projects/linuxcnc/gmocappy/"
 "de/>\n"
 "Language: de\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 5.17.1-dev\n"
+"X-Generator: Weblate 2026.5.dev0\n"
 "X-Poedit-Language: German\n"
 "X-Poedit-Country: GERMANY\n"
 "X-Poedit-SourceCharset: utf-8\n"
@@ -1288,6 +1288,7 @@ msgid "Size"
 msgstr "Größe"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:96
+#, fuzzy
 msgid "Digits"
 msgstr "Nachkommast."
 

src/po/gmoccapy/fr.po

@@ -6,18 +6,18 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: gmoccapy_fr\n"
-"Report-Msgid-Bugs-To: \n"
+"Report-Msgid-Bugs-To: emc-developers@lists.sourceforge.net\n"
 "POT-Creation-Date: 2026-04-16 19:18+0200\n"
-"PO-Revision-Date: 2025-11-29 23:09+0000\n"
-"Last-Translator: \"S-G.\" <grimaitres@gmail.com>\n"
+"PO-Revision-Date: 2026-05-14 09:29+0000\n"
+"Last-Translator: Anonymous <noreply@weblate.org>\n"
 "Language-Team: French <https://hosted.weblate.org/projects/linuxcnc/gmocappy/"
 "fr/>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 5.15-dev\n"
+"X-Generator: Weblate 2026.5.dev0\n"
 "X-Poedit-SourceCharset: UTF-8\n"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.py:272
@@ -1104,6 +1104,7 @@ msgid "Information over the tool in spindle"
 msgstr "Informations sur l'outil en broche"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:39
+#, fuzzy
 msgid "Tool no."
 msgstr "N° d'outil"
 
@@ -1247,10 +1248,12 @@ msgid "Start as window"
 msgstr "Démarrer dans une fenêtre"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:74
+#, fuzzy
 msgid "X Pos."
 msgstr "Pos. X"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:75
+#, fuzzy
 msgid "Y Pos."
 msgstr "Pos. Y"
 
@@ -1718,6 +1721,7 @@ msgid "Use auto tool measurement"
 msgstr "Utiliser mesure d'outil auto"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:184
+#, fuzzy
 msgid "Z Pos."
 msgstr "Pos. Z"
 
@@ -1739,6 +1743,7 @@ msgid "Search Vel."
 msgstr "Recherche Vit."
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:189
+#, fuzzy
 msgid "Probe Vel."
 msgstr "Vit. sonde"
 
@@ -1846,6 +1851,7 @@ msgid "enter auto mode to run programs"
 msgstr "entrer en mode auto pour lancer les programmes"
 
 #: src/emc/usr_intf/gmoccapy/gmoccapy.glade.h:221
+#, fuzzy
 msgid "show user tabs"
 msgstr "Voir onglets perso."