diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 5863c4b794a..380b2f3d4a7 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -2391,12 +2391,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index bca4bcc871d..5567e45cf57 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h index dd93e455aea..1647f342643 100644 --- a/config/examples/3DMatik/XL/Configuration_adv.h +++ b/config/examples/3DMatik/XL/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index acf1842a5df..c38af322fe0 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 640f499dde3..75fbf61c76b 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index bbd9ed7b036..487687332a6 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -2392,12 +2392,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index c663b12784b..89a97922f26 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index f9f9dcc4300..2ba49b57fc7 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 12b478c79d2..2c9163642e8 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 12b478c79d2..2c9163642e8 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 25356d06573..b354ec1d6c5 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 776e1cafd74..96497103685 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 2d8218e691e..88aa24e3d30 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 5932d4fbb06..905ed25dde0 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index c16118f6c09..906b61b4018 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 9d74fc83ed2..4d88b8294a5 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 3020f36bdd4..cbec8b17f41 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 7301935b858..6daccf7a361 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 7301935b858..6daccf7a361 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 7301935b858..6daccf7a361 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 7301935b858..6daccf7a361 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 3110d68cb69..ca2bae99d4d 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 3110d68cb69..ca2bae99d4d 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 3110d68cb69..ca2bae99d4d 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 92dda36f594..31995ad4078 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 77c6bd1f9d7..5eaab7bab88 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 62fef2f1d30..f79ffc303db 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index f862df3935f..f258b849a2b 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 41a25a03d0a..f2be798b8be 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index 380c604bd99..d3dc6e12f6a 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 3e2579339f9..2369c1d4a74 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 7dcf05acc37..ba624c4f936 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 7f7d53b71d6..fe7f3affb70 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -2387,12 +2387,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index c2b1adf4d1a..012e793e31a 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 016120282da..aaf671cdb42 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index de03b1b4761..a0f5aead015 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index ba6efc5e33f..590c13c6573 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 9b3bea4a90d..68c9460f63f 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index de03b1b4761..a0f5aead015 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 97c3a1d4766..2923e8b1f77 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 4eb57f5917e..e59efed4bb4 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h index bbf7fa18f91..97f8340adcd 100644 --- a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 3827749e4e3..bfceb25d239 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -2379,12 +2379,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 4c2254d208b..3c824b55b26 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index 47f1e3f0710..2d7b2616660 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index f1e3e5a969a..8ec8eb5f3d7 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h b/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h index 36d16257d6f..033be6aa57b 100644 --- a/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h +++ b/config/examples/BIQU/BX/all-metal-hotend/Configuration_adv.h @@ -2385,12 +2385,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIQU/BX/base/Configuration_adv.h b/config/examples/BIQU/BX/base/Configuration_adv.h index 2150f5d6e5c..18e5608c4c0 100644 --- a/config/examples/BIQU/BX/base/Configuration_adv.h +++ b/config/examples/BIQU/BX/base/Configuration_adv.h @@ -2385,12 +2385,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index 999942757b6..3a6f26e8d90 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index c121e69d36e..fd199c9bfeb 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index b9c6a230659..9d880ef7d5d 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 861fe698a91..7af9f23f1f5 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -2390,12 +2390,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index b9c6a230659..9d880ef7d5d 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/CNC/miniRambo/Configuration_adv.h b/config/examples/CNC/miniRambo/Configuration_adv.h index b87cd9f570d..6a5b6db3502 100644 --- a/config/examples/CNC/miniRambo/Configuration_adv.h +++ b/config/examples/CNC/miniRambo/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index c62a9cd5b67..223a336106c 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 28455a14dbc..3a44050e059 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index a2902499e41..b7ce706727f 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 Max/Configuration_adv.h b/config/examples/Creality/CR-10 Max/Configuration_adv.h index 0e63211f29d..cc5cc7f4fab 100644 --- a/config/examples/Creality/CR-10 Max/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Max/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c9191e2285f..8d9e29ffdb5 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index d140c2210c3..22c3cac22b5 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 94f7071c45b..464df3b561c 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index b500157f01f..b23c5bd48f4 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -2381,12 +2381,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 53885f83065..ab3ef6e118f 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 12997c5fcff..301f004249a 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index f78a57ff779..e82fe89b458 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -2383,12 +2383,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 53885f83065..ab3ef6e118f 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h index efea6096fc2..e8128aac213 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h index 876fef8f445..41316719cfa 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 0acc83c0e8b..5305e339a84 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -2387,10 +2387,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 95fd5837e25..54d8bb9443d 100644 --- a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -2389,10 +2389,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h index 1b8718d384b..7c3bda8625e 100644 --- a/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Stock/Configuration_adv.h @@ -2389,10 +2389,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a7bb7b0d88d..792310aa23b 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index b9c45c1b89a..847282421a9 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 11c20913974..bc2e57e3fc3 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10S Pro/Configuration_adv.h b/config/examples/Creality/CR-10S Pro/Configuration_adv.h index 725bcb13277..ea5298c9fc5 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-10S Pro/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 617b54e9e97..f893611c440 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index db823b2d58e..385797b87c9 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a7bb7b0d88d..792310aa23b 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 94ad4d66b6a..0fb9da217d6 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index ba8907dafbc..369615e746c 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h index 619f19b2809..e1de8ef3acb 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 6140cd1cc81..8f2b7161230 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 344bffd2379..6f280202d48 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index 2adbb3f4b16..c01e8cb81fc 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index 2adbb3f4b16..c01e8cb81fc 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 62b079c4fa8..292241699fd 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index a115f0296f0..c3b113c4a31 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 24856019a3d..5130696819c 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h index 5339de69571..dfc39dd6559 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index f2d92f1cb20..faa15bae897 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index e9a9acf3c51..e6f189beb7a 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 53b611563ad..1c844614603 100644 --- a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2384,10 +2384,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h index d6b77520908..35536df35f0 100644 --- a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration_adv.h @@ -2384,10 +2384,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 61889afeda7..cf126c1d7e4 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -2383,12 +2383,9 @@ // ENABLE FOR BLTOUCH //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index 85ccd74d5fc..62e2ff01a45 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 1fd4c0ca4dd..2ea9dc42e7e 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index eab034d3799..cdadee2f707 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index eab034d3799..cdadee2f707 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b563f3a7c56..28e46a172b7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h index b7940b16cd4..707670165e8 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h index 4a7143f2b3c..88a11036e69 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index c1461a058b9..7b8d0d7432b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 1765e6cf3a8..ada99f3b5e7 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h index 7096476cf65..5c199e7d571 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h index 67b054c9136..85cc8eada5f 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index 63fb39cc673..c07c44928af 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index 63fb39cc673..c07c44928af 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index a2135fd44c3..a18eb4f9d3c 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 29ae90d35dc..3739600ae62 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 05fa57bbe64..2bc524def61 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h index e4bd0f41659..2bb193fa526 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 057426c6a48..973a3be6026 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 8401ad0ad89..92f9838edfa 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h index a5c2b1b0520..9d240e3386e 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h index ef088141ed3..e5a6082c557 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h index 280555ae519..3cb385954f1 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h index c6b17ebf883..e71ab365143 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 9dfc70508c2..99f7cf2640f 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index f361879be0e..f63c9c9c4c0 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h index a98a2df7ae6..466968c2657 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h index fd13e03de87..943a1f297b4 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index b1a9af44906..1e19a1ada86 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 1362e1c15db..a2bf7435908 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 6d8657423a1..e84d6280522 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 4afcf005349..68907ba32af 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 19a836f8451..1b9c86efcc8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 4afcf005349..68907ba32af 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 06e9dc645ab..9094e680f4f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 0b7dd38b4c0..92fcb6673a3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 0b7dd38b4c0..92fcb6673a3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 12d5f6aeb07..abb64946e5a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 60450d58b00..15b4905f69d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h index 4a7143f2b3c..88a11036e69 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index c1461a058b9..7b8d0d7432b 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 2dfb553184d..c9b328556fc 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 67b054c9136..85cc8eada5f 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index e5b13633272..5efa67cf090 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index e5b13633272..5efa67cf090 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 6b2e3a5056c..459b049c720 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index e5b13633272..5efa67cf090 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index e5b13633272..5efa67cf090 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 0aefd3366e9..705a9a88d67 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -2381,12 +2381,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 2d607650b8c..ae3de0869b7 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index a6fd485532e..88a5a500132 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index a8784a259cf..fe0c6f01e9f 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 870f861b783..4e03ea46653 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index b50dacfd919..5888c3b3e25 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index 1b1713d8ece..0a9f21fb5b7 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h index 8c14c9a0106..d8c3ff0415b 100644 --- a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h index 8be2956be96..12efe75efa8 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h index 0473a038c60..96b61f6c71f 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 4a7df8235b7..7c04011534d 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d73357b64a2..c48ff47fd1e 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index f82a94a882f..509b2d6e8b1 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index 53f82edd340..0c7f4c9aa11 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 1c4af2ec4de..614f7969ad3 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 4fc91d9452f..a683e775b49 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -2385,10 +2385,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index ed4fb40d8fd..b1f80664211 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 4af4a5e543b..2815c066dc4 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -2386,12 +2386,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 4a7df8235b7..7c04011534d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 0be314db417..25f99ac0587 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 7dc8ca11346..6cfd085ef0c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 65e3162a884..4a1a88ebb04 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index 2b465e16f3e..b7df85cc21b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h index d68bbfc8fd5..cbaade4db96 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 2f5c37866b9..e0c176aa4ac 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h index 82f6ec1cda4..196f31a47b2 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 97482f7c51b..e7b9501ed94 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index abf7d3bb992..68a5a79f4d5 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 154bee9b099..31cf6e82303 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 490c0f77902..ba030acdda4 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/E3D/BigBox Dual/Configuration_adv.h b/config/examples/E3D/BigBox Dual/Configuration_adv.h index 338246993cc..9f3f3634d7e 100644 --- a/config/examples/E3D/BigBox Dual/Configuration_adv.h +++ b/config/examples/E3D/BigBox Dual/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index a75e16d7d6b..9100bce2569 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index c076ad22c41..fe71ac5631b 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Eazao/Zero/Configuration_adv.h b/config/examples/Eazao/Zero/Configuration_adv.h index 35fda65f679..92533ca8d1a 100644 --- a/config/examples/Eazao/Zero/Configuration_adv.h +++ b/config/examples/Eazao/Zero/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index d98df9480b8..0370866334c 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index f7ce3d83796..0d8ccff00cc 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -2385,10 +2385,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index d31152b66c7..0f47da50639 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -2388,12 +2388,9 @@ #if ENABLED(BLTOUCH) #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 9749cf60e43..e8b3c7c91b4 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -2388,12 +2388,9 @@ #if ENABLED(BLTOUCH) #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 38f67101fe2..c08be8fcafa 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index d2c711b768b..7738e4e3cf7 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 965f951a116..bf1e1099196 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 39d1f617518..5a047c86458 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 39d1f617518..5a047c86458 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 2f4a0b73e61..d211f19f9e5 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index c1e88ba7afb..b8b4ab5e85a 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h index e3ecbe494df..f8f12b81797 100644 --- a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h +++ b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h @@ -2380,12 +2380,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index fbf004fc67a..291ab30d3f0 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 15b1c5c31ac..849eebae9ce 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -2385,12 +2385,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index f863515b5e3..95812a3fc16 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index f863515b5e3..95812a3fc16 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index f804be3e9a8..8ef9a01af63 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index c1f7d2f43f5..bf39cd3908d 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index d127d6d4338..cfad60c0e6d 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 1163747470b..123217fc457 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 5a13a597dcb..9dc22cdae48 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 651b8f5e5e8..1f5a7f54433 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 651b8f5e5e8..1f5a7f54433 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 1163747470b..123217fc457 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 651b8f5e5e8..1f5a7f54433 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 651b8f5e5e8..1f5a7f54433 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index bcfc5682087..53246d4d24d 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index bcfc5682087..53246d4d24d 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index bcfc5682087..53246d4d24d 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index aec8186e7ce..366f8dd7cee 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index aec8186e7ce..366f8dd7cee 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index aec8186e7ce..366f8dd7cee 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 0f274d1f48a..2d336b54751 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 965f951a116..bf1e1099196 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index aec8186e7ce..366f8dd7cee 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 0f274d1f48a..2d336b54751 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 0620012d1b9..664ff0ffb65 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 965f951a116..bf1e1099196 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index a349cdfb53f..b1d29c3ac68 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 7c81dc1e679..cfa7526f405 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 1163747470b..123217fc457 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 1163747470b..123217fc457 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 8b997a11fc4..9af5514d509 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Hictop/3DP-17/Configuration_adv.h b/config/examples/Hictop/3DP-17/Configuration_adv.h index 02beeb1471b..693f4a37257 100644 --- a/config/examples/Hictop/3DP-17/Configuration_adv.h +++ b/config/examples/Hictop/3DP-17/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 15736116316..b4f14bd6ceb 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index e37747930cc..f659e81fd96 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 2139cc4ed74..125fa0939c3 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -2388,12 +2388,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 40a80e52620..75d88d81747 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index bcf476e6dd2..3481a503a1d 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -2388,12 +2388,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index a07ed362d1a..a3a400ecd76 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 4ccade1347f..8de25741b02 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 720e8c23104..4bf42c70d85 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h index 7d28517fd2e..97a682cfcac 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 7301935b858..6daccf7a361 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 7f03e796c54..d19088e289e 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 05eab23fe79..28cdbda452f 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 642604dfd3e..08acf723d47 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 0846e361f4b..d880b9efc21 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index af83edb173b..1f0acb6839e 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index 74b154eb457..ff669b5183c 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index dc653f5bc0d..36b43329b65 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 2451122361c..9d03ee6cac8 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Materia101/Configuration_adv.h b/config/examples/Materia101/Configuration_adv.h index aec06d0af88..1ae7103a27d 100644 --- a/config/examples/Materia101/Configuration_adv.h +++ b/config/examples/Materia101/Configuration_adv.h @@ -2380,12 +2380,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index 806d12f9e30..6a067604560 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 319b44007a4..9cb9556080f 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index 090f14f1dc7..aa1abe5bb5d 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index fd9d4020001..d6d8fc704d1 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index fa4550d5375..792458d12ae 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 0ec84921e65..627920decf9 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index 75d6ab8b996..6964283a698 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index c2e61a2017b..dfde46807f2 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index 189ef2d2af7..3f22f02c7a2 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -2381,12 +2381,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Opulo/Lumen_REV5/Configuration_adv.h b/config/examples/Opulo/Lumen_REV5/Configuration_adv.h index 92ef5c06f18..cd7619ab6b8 100644 --- a/config/examples/Opulo/Lumen_REV5/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV5/Configuration_adv.h @@ -2381,12 +2381,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index bc58433144c..7eaea0bf4ab 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 7179ac6c03d..f0bed8f19b0 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h index 27c8ca07042..75755a6372a 100644 --- a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h +++ b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index bfbf6131c7c..0da7e3bc138 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index c0d14ef8084..12dd5bab4bb 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index da9664a17cb..f511dde2f2c 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 25356d06573..b354ec1d6c5 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 965f951a116..bf1e1099196 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index d20c704e2bc..2d847742122 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index d20c704e2bc..2d847742122 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index d20c704e2bc..2d847742122 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index e99e64c13ef..064233314cd 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h index 619f19b2809..e1de8ef3acb 100644 --- a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index fd43594c0fc..f335cf6457c 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index ccad4b8acf2..6b71c8c9fac 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h index 97764dabea8..0e2d333b914 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 77d7bc2ac14..77bc237e746 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 5d639ec35de..caef65f6173 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 2fd733c443b..b835f2a7fd3 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 8e9d8ac7caf..bb58aa7bc8e 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 9d578d4d8e9..97c1bd0168a 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index ed69376399b..d6b5629cc44 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2385,10 +2385,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 7e6d7db59d6..e445d5d4c64 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2385,10 +2385,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 0d8c2a5336e..a71782a8286 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2384,10 +2384,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index b5f58e60f3e..754aba6c786 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 80b0e4d893d..f593ca256a0 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index 9c44c700261..bbe6347efb1 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index a0377a4761e..14f370cd747 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-05/Configuration_adv.h b/config/examples/Sovol/SV-05/Configuration_adv.h index 0e55c491f93..8a826ddb70c 100644 --- a/config/examples/Sovol/SV-05/Configuration_adv.h +++ b/config/examples/Sovol/SV-05/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-06 Plus/Configuration_adv.h b/config/examples/Sovol/SV-06 Plus/Configuration_adv.h index a8ea7714300..c7916f9a132 100644 --- a/config/examples/Sovol/SV-06 Plus/Configuration_adv.h +++ b/config/examples/Sovol/SV-06 Plus/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sovol/SV-06/Configuration_adv.h b/config/examples/Sovol/SV-06/Configuration_adv.h index f858cbab24d..c19b5514a02 100644 --- a/config/examples/Sovol/SV-06/Configuration_adv.h +++ b/config/examples/Sovol/SV-06/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index d728f48e355..5437121dd20 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -2382,12 +2382,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index 50e1646e94d..bdf85955877 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 201dfec469b..7d1f0ce197a 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index cfbbca0e8b8..0229f5e100e 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 1ffe433bfcc..471c260f783 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index a38145d677e..078c938e18c 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index 62cb2acf201..81ca8d90fa4 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index f8ea0615435..e2c0cf70426 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index f8ea0615435..e2c0cf70426 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index 07666512dcc..bd2c786328a 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 384ebe36d26..dd0f888f692 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index 2a0b95c8e65..7b1b1aed893 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 91b13c7a615..4165cac38c0 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 292ef2b0e45..507491658a4 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index 0492798d6bf..bdf63d5b956 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/X5SA Pro/Configuration_adv.h b/config/examples/Tronxy/X5SA Pro/Configuration_adv.h index b0dd44be200..bb8d0a95ee7 100644 --- a/config/examples/Tronxy/X5SA Pro/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA Pro/Configuration_adv.h @@ -2400,12 +2400,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index a200caef1ab..c4e40f206f3 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -2391,12 +2391,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 81d193b6a27..20331603eb0 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -2386,12 +2386,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index 2c00da6aaba..58b1499a05e 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Turnigy/Fabrikator/Configuration_adv.h b/config/examples/Turnigy/Fabrikator/Configuration_adv.h index 0361d14b90d..9582142387f 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration_adv.h +++ b/config/examples/Turnigy/Fabrikator/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index fef5aac09f0..78a7e2441dc 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -2383,10 +2383,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 1d9365f5472..904fc48ef3a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -2385,10 +2385,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 1d9365f5472..904fc48ef3a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -2385,10 +2385,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 1d9365f5472..904fc48ef3a 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -2385,10 +2385,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h index 61e1773a778..8b44cae15fa 100644 --- a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h +++ b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index ece1ad73929..0249f7b9ba5 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -2388,12 +2388,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 0fce576c60c..02240630370 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -2388,12 +2388,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index ff3bbd53b03..e1bb7c37bc0 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -2385,10 +2385,8 @@ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #endif - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 3d107bb70cd..adacd837fe3 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c5d01c8b36f..1b728893ebd 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index 2cfc8d4b11b..f55923be5a1 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 78ca086c926..3b37abb3248 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index bd5c42aed9e..dcf597a8e1c 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index ad22fa301f1..07d8bb3cc45 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 8fcfd9b1126..59490e221b4 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -2380,12 +2380,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 13f4b295d5b..bd9b3f18093 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index b58a803f176..6d15848286c 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -2395,12 +2395,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 2931e593e34..49803798d14 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -2395,12 +2395,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 683d5055cea..61a315f47a3 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 683d5055cea..61a315f47a3 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index eb4f82459f3..0a32a891713 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 9edbf5c9a10..a45a2ec792d 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 02dabb718fc..19be0456d11 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index e4b9ab10097..94c2dc26094 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 0fd437200c2..13c4e2d58d2 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 6a8e5ad9d39..b434afbc2ac 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index cb5fe69aa8d..20b1e55a7df 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index cb5fe69aa8d..20b1e55a7df 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 08869963b7d..0dcf7db3154 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 0ad9d2fce3d..9b5b59e0438 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 631ce898d52..0d8f2402a2e 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index de0f630cc29..d51cfb38287 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets #define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index cef03670d56..a109de82368 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index a51bcb93139..dbdb44b1267 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 8bab273c606..864bb4a13bf 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -2385,12 +2385,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index b7f04d7db20..c6ecd50548c 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -2383,12 +2383,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index b7f04d7db20..c6ecd50548c 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -2383,12 +2383,9 @@ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 974e33eed01..44b689d4310 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 36170163d1f..e7f50518d5d 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 12d118c96da..2247d4a6d41 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 3dbf5839f54..83f2ae6d0cc 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 3dbf5839f54..83f2ae6d0cc 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index ff0090c2e14..d283c546d80 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 4f5ba0d0403..cc61abd028a 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 4f5ba0d0403..cc61abd028a 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 4f5ba0d0403..cc61abd028a 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 4f5ba0d0403..cc61abd028a 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 0018c60928a..82f59e8820e 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 5df63cb8a8c..36319c5330c 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 0b809107823..69d291e4df6 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index f0067252a39..05ccb962b47 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index c0d5020f9e1..bb8cae5ed1d 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 0c895a1c13b..be753622f84 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -2384,12 +2384,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index ff0090c2e14..d283c546d80 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 48736827014..5f07ff581d7 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index 7a6ea2834a6..7abccebb1d1 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 447a62b232d..c59eaf79c43 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -2383,12 +2383,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index f2242a345fc..63972362380 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index 05e41e3d64f..7532cf15c62 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 37116997f07..bd1a7eae16a 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index d2d2dac7e02..a77fe969780 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index de392ecb722..4928d2495ac 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -2382,12 +2382,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - //#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping - #if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z) - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif