Clean up, format

Author: thinkyhead

Marlin/src/inc/Conditionals-4-adv.h

@@ -428,9 +428,9 @@
 #elif TEMP_SENSOR_0 == -18
   #warning "Config is TEMP_SENSOR_0 == -18"
   #define HAS_ADS1118 1
-  #define TEMP_SENSOR_0_IS_ADS1118  1  
+  #define TEMP_SENSOR_0_IS_ADS1118  1
   #define TEMP_SENSOR_0_ADS_TMIN    0
-  #define TEMP_SENSOR_0_ADS_TMAX 1024  
+  #define TEMP_SENSOR_0_ADS_TMAX 1024
 #elif TEMP_SENSOR_0 > 0
   #define TEMP_SENSOR_0_IS_THERMISTOR 1
   #if TEMP_SENSOR_0 == 1000
@@ -477,9 +477,9 @@
 #elif TEMP_SENSOR_1 == -18
   #warning "Config is TEMP_SENSOR_1 == -18"
   #define HAS_ADS1118 1
-  #define TEMP_SENSOR_1_IS_ADS1118  1  
+  #define TEMP_SENSOR_1_IS_ADS1118  1
   #define TEMP_SENSOR_1_ADS_TMIN    0
-  #define TEMP_SENSOR_1_ADS_TMAX 1024    
+  #define TEMP_SENSOR_1_ADS_TMAX 1024
 #elif TEMP_SENSOR_1 > 0
   #define TEMP_SENSOR_1_IS_THERMISTOR 1
   #if TEMP_SENSOR_1 == 1000

Marlin/src/inc/Warnings.cpp

@@ -114,10 +114,6 @@
   #warning "Warning! Don't use dummy thermistors (998/999) for final build!"
 #endif
 
-#if ENABLED(HAS_ADS1118) 
-  #warning "ADS1118 support is in development"
-#endif
-
 #if ANY_THERMISTOR_IS(-18)
   #warning "ADS1118 support (-18) is in development"
 #endif

Marlin/src/lcd/HD44780/marlinui_HD44780.cpp

@@ -452,11 +452,11 @@ bool MarlinUI::detected() {
     #if ENABLED(LCD_I2C_TYPE_MCP23017)
       // Reading these buttons is too slow for interrupt context
       // so they are read during LCD update in the main loop.
-      uint8_t slow_bits = lcd.readButtons()
+      uint8_t slow_bits = (lcd.readButtons()
         #if !BUTTON_EXISTS(ENC)
           << B_I2C_BTN_OFFSET
         #endif
-      ;
+      );
       #if ENABLED(LCD_I2C_VIKI)
         if ((slow_bits & (B_MI | B_RI)) && PENDING(millis(), next_button_update_ms)) // LCD clicked
           slow_bits &= ~(B_MI | B_RI); // Disable LCD clicked buttons if screen is updated