Deployed baa1e9d with MkDocs version: 1.6.1

advanced/2d-1d-Mixed-Setup/index.html

@@ -4328,7 +4328,7 @@ <h1>Mixed 2D and 1D Bus</h1>
 <h2 id="overview">Overview</h2>
 <p>🌜</p>
 <p>WLED-MM supports mixing 2D and 1D setup on the same unit, the expected result is that you could use 2D fixture and still chain a strip after or setup a strip and then a matrix after on the same pin.</p>
-<p>!Important: The necessary steps are different from upstream WLED. In WLED-MM, you create a "pseudo" 2D panel for the trailing strip, then set it "Expand 1D FX" to "Pixels" in segment options.</p>
+<p>!Important: The necessary steps are different from upstream WLED. In WLED-MM, you create a "pseudo" 2D panel for the trailing strip, then set "Expand 1D FX" to "Pixels" in segment options.</p>
 <ol>
 <li>
 <p>Setup your total LED count in Config -&gt; LED Preferences as usual. For example a 8x8 matrix and a strip of 32 pixels chained to the end of your matrix. The total count should be 64 + 32 = 96. This also works with virtual LEDs via DDP or ArtNet.