Deployed a72f1ee with MkDocs version: 1.6.1

advanced/2d-1d-Mixed-Setup/index.html

@@ -4339,12 +4339,16 @@ <h2 id="overview">Overview</h2>
 <li>Setup your total LED count in Config -&gt; LED Preferences as usual. For example a 8x8 matrix and a strip of 30 pixels chained to the end of your matrix. The total count should be 64 + 30 = 94. This also works with virtual LEDs via DDP or ArtNet.</li>
 <li>Go to Config -&gt; 2D setup and create the 8x8 matrix, and a second matrix panel for the trailing strip.</li>
 <li>For larger pixel counts, you should chose square dimensions like 5x6. For smaller pixel counts, create a panel with only one row, like 30x1.</li>
-<li>Position the "pseudo" 2D panel at the right / top side of your "real" 8x8 matrix panel =&gt; startX = 8, startY = 0.</li>
+<li>Position the "pseudo" 2D panel at the right / top side of your "real" 8x8 matrix panel =&gt; startX = 8, startY = 0. Another possibility is to place the "pseudo" panel below your nowmal panel in 2D settings.</li>
 <li>Now create segments for both 2D panels. click on the segment for your trailing strip, select a 1D effect, then change "Expand 1D FX" to "Pixels" in segment options.</li>
 <li>You might need to experiment with "Reverse X" and "Reverse Y" options, to make the effect behave correctly.</li>
 <li>Save your segment, create a new preset for the current setup. Its recommended to set this preset as startup preset in LEDs settings.</li>
 </ol>
 <p>Note: some "pseudo" 2D layouts are automaticially detected by WLED-MM. For these cases, 1D effects will run as expected, but you might not see the  "Expand 1D FX" segment option.</p>
+<div class="admonition tip">
+<p class="admonition-title">Tip</p>
+<p>A user has posted a <a href="https://github.com/MoonModules/WLED-MM/issues/79#issuecomment-2068537606">set of screenhosts here</a> that guide through all steps.</p>
+</div>