a little bit of tuning

Author: EvilLord666

ISA_Camac_Interface/sm2201_interface_board.qsf

@@ -37,7 +37,7 @@
 
 
 set_global_assignment -name FAMILY "Cyclone IV E"
-set_global_assignment -name DEVICE AUTO
+set_global_assignment -name DEVICE EP4CE6E22I7
 set_global_assignment -name TOP_LEVEL_ENTITY sm2201_interface_board
 set_global_assignment -name ORIGINAL_QUARTUS_VERSION 18.1.0
 set_global_assignment -name PROJECT_CREATION_TIME_DATE "21:46:39  JUNE 25, 2019"
@@ -58,4 +58,12 @@ set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_RO
 set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
 set_global_assignment -name VERILOG_FILE sm2201_interface_board/src/dig_machine_ip3604.v
 set_global_assignment -name VERILOG_FILE sm2201_interface_board/src/dig_machine_ip3601.v
+set_global_assignment -name MIN_CORE_JUNCTION_TEMP "-40"
+set_global_assignment -name MAX_CORE_JUNCTION_TEMP 100
+set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "23 MM HEAT SINK WITH 200 LFPM AIRFLOW"
+set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)"
+set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (Verilog)"
+set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation
+set_global_assignment -name EDA_OUTPUT_DATA_FORMAT "VERILOG HDL" -section_id eda_simulation
+set_global_assignment -name ENABLE_LOGIC_ANALYZER_INTERFACE OFF
 set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top

ISA_Camac_Interface/sm2201_interface_board/sm2201_interface_board.v

@@ -395,15 +395,15 @@ SN74LS374 d8(.clk(z_c2), .out_control(gnd), .data(d8_data), .out(d8_out));
 /* DD11 - IC8226 (Buffer)
  * DI
  * DB
- * DO
+ * DO - connected to CAMAC BUS
  */
 IC82x6 #(.INVERTED_OUTPUT(1)) 
     d11 (.dce(q_r), .cs_n(d_sel), .d_in(d11_di), .d_bus(d11_db), .d_out(d11_do));
 
 /* DD12 - IC8226 (Buffer)
  * DI
  * DB
- * DO
+ * DO - connected to CAMAC BUS
  */
 IC82x6 #(.INVERTED_OUTPUT(1)) 
     d12 (.dce(q_r), .cs_n(d_sel), .d_in(d12_di), .d_bus(d12_db), .d_out(d12_do));