Spool Attributes

Attribute	manual entry	calculated entry	Prusa Slicer gcode parsing (when available)	available in	Wiki comment
Spool Name	X		; filament_settings_id = "*"	csv, gui	mandatory
Color Name	X			csv, gui
Color Code [hex]	X		; filament_colour = #*	csv, gui
Vendor	X		; filament_vendor = *	csv, gui
Material	X		; filament_type = *	csv, gui
Serialnumber	X			csv, gui
Density [g/cm3]	X		; filament_density = *	csv, gui	Needed for filament usage prediction
Diameter [mm]	X		; filament_diameter = *	csv, gui	Needed for filament usage prediction
Diameter Tolerance[mm]	X			csv, gui
Flow rate compensation [%]	X			csv, gui
Temperature [C]	X		; temperature = *	csv, gui
Bed Temperature [C]	X		; bed_temperature = *	csv, gui
Enclosure Temperature [C]	X			csv, gui
Offset Temperature [C]	X			csv, gui
Offset Bed Temperature [C]	X			csv, gui
Offset Enclosure Temperature [C]	X			csv, gui
Total weight [g]	X			csv, gui	Needed for filament usage prediction; consists of filament and empty spool
Spool weight [g]	X		; filament_spool_weight = *	csv, gui	Weight of empty spool w/o filament
Used weight [g]		X		csv, gui
Total length [mm]	X			csv, gui
Used length [mm]		X		csv, gui
First use [dd.mm.yyyy hh:mm]		X		csv, gui
Last use [dd.mm.yyyy hh:mm]		X		csv, gui
Purchased from	X			csv, gui
Purchased on [dd.mm.yyyy]	X			csv, gui
Cost	X		; filament_cost = *	csv, gui
Cost unit	from preset			csv, gui	Currency symbol can be changed in plugin settings
Note	X		; filament_notes = "*"	csv, gui
Active flag	X			gui
QR Code		X		gui
Tool association	X			gui
Template flag	X			gui