Skip to content

setup.md

Latest commit

 

History

History
80 lines (56 loc) · 3.45 KB

setup.md

File metadata and controls

80 lines (56 loc) · 3.45 KB

Setup

This chapter describes how to install the Arm CMSIS Debugger extension pack and how to configure the debug connection for single- and multi-core devices.

Installation

The Arm CMSIS Debugger extension pack includes extensions that you can use to debug CMSIS solution-based projects.

  1. In Visual Studio Code, open the Extensions view and type Arm CMSIS Debugger in the search bar.

  2. Click Install to start the installation.

Debug Setup

The debug setup requires a GDB installation supporting the GDB remote protocol and that can connect to a GDB server like pyOCD.

We recommend installing the Arm GNU Toolchain using the Arm Tools Environment Manager extension. It comes with arm-none-eabi-gdb which is used in the Arm CMSIS Debugger default debug configurations.

pyOCD Debug Setup

This extension includes a pyOCD distribution which is used by default.

The cmsis-debug-pyocd debugger type is used to add a debug configuration in the launch.json file for debugging with GDB and pyOCD. This configuration uses the gdbtarget debugger type registered by the CDT GDB Debug Adapter Extension.

If you wish to use a different pyOCD installation, enter the full path to the executable (including the file name) in the target>server setting in the launch.json configuration file.

SEGGER® J-LINK® Debug Setup

Install the latest J-LINK Software and Documentation Pack from SEGGER. Ensure all required drivers and host platform specific settings are done.

The extension expects the installation folder to be on your system PATH environment variable. Alternatively, update your debug configuration's target>server setting to contain the full path to the J-LINK GDB server executable (including the file name).

The cmsis-debug-jlink debugger type is used to add a debug configuration in the launch.json file for debug with GDB and the SEGGER J-LINK GDB server. This configuration uses the gdbtarget debugger type registered by the CDT GDB Debug Adapter Extension.

Project setup

To be able to use the GNU Debugger under the hood, you need to make sure that the project build process creates the right binary files in the correct formats. Thus, you need to amend your project's *.csolution.yml and *.cproject.yml files.

  • Make sure that the ELF file is written using the DWARF Verion 5 format. For example, when generated with the Arm Compiler for Embedded, add the following to your *.csolution.yml file (before the projects: section for example):
  misc:
    - for-compiler: AC6
      C-CPP:
        - -gdwarf-5
      ASM:
        - -gdwarf-5
      Link:
        - --entry=Reset_Handler

!!! Note For other toolchians, please consult the reference manual on how to generate DWARF Version 5 formatted ELF files.

  • In addition to generating an ELF file, you also need to create a HEX file that will be used to flash the firmware image. Add the following to any of your *.cproject.yml files (at the end of the file):
  output:
    type:
    - elf
    - hex