OpenBCI · catamgalvan · Jul 16, 2026 · Jul 16, 2026 · Jul 16, 2026
diff --git a/website/docs/AddOns/Electrodes/00-ElectrodesLanding.md b/website/docs/AddOns/Electrodes/00-ElectrodesLanding.md
@@ -21,6 +21,6 @@ OpenBCI boards are compatible with a variety of different electrodes.
 
 [**Buy Here!**](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-50-pack)
 
-## EMG/ECG Snap Electrode Cables
+## Snap Electrode Cables (EMG/ECG/EEG)
 
-[**Buy Here!**](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+[**Buy Here!**](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
diff --git a/website/docs/Examples/EMGProjects/01-EMG_Scrolling.md b/website/docs/Examples/EMGProjects/01-EMG_Scrolling.md
@@ -15,7 +15,7 @@ The following instructions are written for use with Windows 10.
 
 1.  OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542)
 2.  [Solid Gel Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-50-pack) or [IDUN Dryode](https://shop.openbci.com/collections/frontpage/products/idun-dryode-kit)
-3.  [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+3.  [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
 4.  Computer with downloaded OpenBCI [GUI](../../Software/OpenBCISoftware/01-OpenBCI_GUI.md)
 
 ## Step 1: Hardware Assembly.

diff --git a/website/docs/Examples/EMGProjects/02-EMG_Controlled_Music.md b/website/docs/Examples/EMGProjects/02-EMG_Controlled_Music.md
@@ -15,7 +15,7 @@ The following instructions are written for use with Windows 10.
 
 1.  OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542)
 2.  [Solid Gel Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-50-pack) or [IDUN Dryode](https://shop.openbci.com/collections/frontpage/products/idun-dryode-kit)
-3.  [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+3.  [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
 4.  Computer with downloaded OpenBCI [GUI](../../Software/OpenBCISoftware/01-OpenBCI_GUI.md)
 
 ## Step 1: Hardware Assembly.

diff --git a/website/docs/Examples/EMGProjects/05-EMG_Chrome_Dino_Game.md b/website/docs/Examples/EMGProjects/05-EMG_Chrome_Dino_Game.md
@@ -14,7 +14,7 @@ The following instructions have been written for use with Linux 16.04.
 
 1.  OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542)
 2.  [Solid Gel Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-50-pack) or [IDUN Dryodes](https://shop.openbci.com/collections/frontpage/products/idun-dryode-kit)
-3.  [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+3.  [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
 4.  Computer with downloaded OpenBCI [GUI](Software/OpenBCISoftware/01-OpenBCI_GUI.md)
 
 ## Step 1: Hardware Assembly.

diff --git a/website/docs/Examples/EMGProjects/EMG_Controlled_Piano.md b/website/docs/Examples/EMGProjects/EMG_Controlled_Piano.md
@@ -13,7 +13,7 @@ Check out an example video of this tutorial being put into action!
 
 1.  OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542)
 2.  [Solid Gel Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-50-pack) or [IDUN Dryode](https://shop.openbci.com/collections/frontpage/products/idun-dryode-kit)
-3.  [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+3.  [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
 4.  Computer with downloaded OpenBCI [GUI](Software/OpenBCISoftware/01-OpenBCI_GUI.md)
 
 ## Step 1: Hardware Assembly

diff --git a/website/docs/FAQ/02-HowProductsGoTogether.md b/website/docs/FAQ/02-HowProductsGoTogether.md
@@ -86,7 +86,7 @@ The first component you need is a biosensing board. Select a board depending on
 
 If you are purchasing the Ganglion board, you will need the [Ganglion Dongle](https://shop.openbci.com/collections/frontpage/products/ganglion-dongle?variant=15473352605768).
 
-Now that you have the board, the second thing you need to get started is a set of electrodes (or a headset, we’ll talk about it after). Our Boards have male header connectors, so you would need to get electrodes that are compatible. If you are interested in mainly doing EMG or ECG, we recommend you use our [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958) with [EMG/ECG Foam Solid Gel Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack), these electrodes are a ready to go solution and plug in directly into our Biosensing boards. If you want to be able to do EEG as well as EMG and ECG, we recommend you get our [Gold Cup Electrodes](https://shop.openbci.com/collections/frontpage/products/openbci-gold-cup-electrodes?variant=9056028163) with [Ten 20 Paste](https://shop.openbci.com/collections/frontpage/products/ten20-conductive-paste-2oz-jars?variant=31373533198). You can affix these electrodes (almost) everywhere with some medical tape, which allows you to measure EEG, EMG, and ECG. If you already have your own electrodes, or have an electrode cap with touch proof connectors, you can still use them with our Biosensing Boards, by purchasing our [Header Pin to Touch Proof Electrode Adapter](https://shop.openbci.com/collections/frontpage/products/touch-proof-electrode-cable-adapter?variant=31007211715).
+Now that you have the board, the second thing you need to get started is a set of electrodes (or a headset, we’ll talk about it after). Our Boards have male header connectors, so you would need to get electrodes that are compatible. If you are interested in mainly doing EMG or ECG, we recommend you use our [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958) with [EMG/ECG Foam Solid Gel Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack), these electrodes are a ready to go solution and plug in directly into our Biosensing boards. If you want to be able to do EEG as well as EMG and ECG, we recommend you get our [Gold Cup Electrodes](https://shop.openbci.com/collections/frontpage/products/openbci-gold-cup-electrodes?variant=9056028163) with [Ten 20 Paste](https://shop.openbci.com/collections/frontpage/products/ten20-conductive-paste-2oz-jars?variant=31373533198). You can affix these electrodes (almost) everywhere with some medical tape, which allows you to measure EEG, EMG, and ECG. If you already have your own electrodes, or have an electrode cap with touch proof connectors, you can still use them with our Biosensing Boards, by purchasing our [Header Pin to Touch Proof Electrode Adapter](https://shop.openbci.com/collections/frontpage/products/touch-proof-electrode-cable-adapter?variant=31007211715).
 
 Another way to go is to purchase the [Mark IV headset](https://shop.openbci.com/collections/frontpage/products/ultracortex-mark-iv). At its core the Mark IV is a frame with dry electrodes, that allows you to affix the dry electrodes to the scalp without having to use any paste. If you are mainly interested in EEG and do not want to have to go through the hassle of using EEG Paste on your hair, this is the way to go. You can purchase the Mark IV with either 8 electrodes or 16 electrodes (you don’t need to purchase extra electrodes). The Mark IV comes in 3 configurations, Print it Yourself, Unassembled, and Pro-Assembled. The Print it Yourself version is great if you have a 3D printer and you are able to print some of the parts yourself. The Print it Yourself version includes all of the electrodes, cables, and all of the other parts that aren’t 3D printable. The Unassembled version comes with all the necessary materials to build the headset, sort of like a puzzle but easier. You can check the [assembly guide](../AddOns/Headwear/01-Ultracortex-Mark-IV.md) for instructions. If you don’t want to bother with assembly or 3D printing parts, you can buy an already assembled headset, our Pro-Assembled Mark IV. Note that neither headset comes with a Biosensing board.
 

diff --git a/website/docs/GettingStarted/Biosensing-Setups/02-EMG-Setup.md b/website/docs/GettingStarted/Biosensing-Setups/02-EMG-Setup.md
@@ -8,7 +8,7 @@ This document will show you how to read EMG data (electrical signals from muscle
 
 1.  OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542) or [Ganglion Board](https://shop.openbci.com/collections/frontpage/products/ganglion-board)
 2.  [Gel-based snap electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack) or [IDUN Dryode](https://shop.openbci.com/collections/frontpage/products/idun-dryode-kit)
-3.  [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+3.  [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
 4.  Computer with downloaded OpenBCI [GUI](../../Software/OpenBCISoftware/01-OpenBCI_GUI.md)
 
 To determine the number of electrodes you will need, add up:

diff --git a/website/docs/GettingStarted/Biosensing-Setups/03-ECG-Setup.md b/website/docs/GettingStarted/Biosensing-Setups/03-ECG-Setup.md
@@ -12,7 +12,7 @@ This step-by-step guide for 3-Lead ECG will show you how to get one channel of l
 
 1.  OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542) or [Ganglion Board](https://shop.openbci.com/collections/frontpage/products/ganglion-board)
 2.  [Gel-based snap electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack)
-3.  Three [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958) — one ground and two sensors.
+3.  Three [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958) — one ground and two sensors.
 4.  [OpenBCI GUI](../../Software/OpenBCISoftware/01-OpenBCI_GUI.md)
 
 ### Connect Electrodes to the OpenBCI Board
@@ -70,7 +70,7 @@ It builds on the above guide to 3-Lead ECG and adds only a few additional steps,
 
 1.  OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542)
 2.  [Gel snap electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack)
-3.  [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958) — 4 individual cables
+3.  [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958) — 4 individual cables
 4.  [OpenBCI GUI](../../Software/OpenBCISoftware/01-OpenBCI_GUI.md)
 
 ### Connect the Electrodes to the OpenBCI Board and to your Body

diff --git a/website/docs/GettingStarted/Biosensing-Setups/04-ExG-Setup.md b/website/docs/GettingStarted/Biosensing-Setups/04-ExG-Setup.md
@@ -59,7 +59,7 @@ Here's a list of material you will need for this tutorial:
     , [Electrode Cap](../../AddOns/Headwear/04-Electrode_Cap_Tutorial.md); we will be using
     the [Headband kit](../../AddOns/Headwear/03-Headband_Tutorial.md) in this tutorial.
 2.  EMG/ECG hardware including [Solid Gel Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-50-pack) or [IDUN Dryode](https://shop.openbci.com/collections/frontpage/products/idun-dryode-kit)
-    and [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+    and [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
 3.  OpenBCI [Cyton](https://shop.openbci.com/products/cyton-biosensing-board-8-channel?_pos=1&_sid=77582f260&_ss=r), [Cyton + Daisy](https://shop.openbci.com/collections/frontpage/products/cyton-daisy-biosensing-boards-16-channel?variant=38959256526)
 4.  [Y-Jumper Cable](https://shop.openbci.com/products/y-splitter-cable). This is required only when using a Daisy board with the Cyton and is usually included when you buy a Cyton+Daisy Kit.
 5.  [Cyton Bluetooth Dongle](https://shop.openbci.com/products/dongle)
@@ -135,7 +135,7 @@ The Ganglion board is a 4 channel board and so, for this tutorial, we will measu
     , [Electrode Cap](../../AddOns/Headwear/04-Electrode_Cap_Tutorial.md); we will be using
     the [Headband kit](../../AddOns/Headwear/03-Headband_Tutorial.md) in this tutorial.
 2.  EMG/ECG hardware including [Solid Gel Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-50-pack) or [IDUN Dryode](https://shop.openbci.com/collections/frontpage/products/idun-dryode-kit)
-    and [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+    and [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
 3.  OpenBCI [Ganglion board](https://shop.openbci.com/products/ganglion-board?_pos=2&_sid=5c75c7cc7&_ss=r).
 4.  [Ganglion Bluetooth Dongle](https://shop.openbci.com/products/ganglion-dongle) (if using an older version of MacOS).
 5.  Computer with [OpenBCI GUI](../../Software/OpenBCISoftware/01-OpenBCI_GUI.md)

diff --git a/website/docs/GettingStarted/Boards/011-Daisy_Getting_Started_Guide.md b/website/docs/GettingStarted/Boards/011-Daisy_Getting_Started_Guide.md
@@ -56,7 +56,7 @@ The Y-Splitter connects the bottom `SRB` pin of the Daisy Board to the bottom `S
 
 <img src="https://raw.githubusercontent.com/openbci-archive/Docs/master/assets/images/MarkIV/Cyton_Daisy_Setup.JPG" width="80%" />
 
-Use the 16 of the color coded cables that came with your Ultracortex MarkIV headset. Alternatively, you can use 16 of our [Gold Cup Electrodes](https://shop.openbci.com/collections/frontpage/products/openbci-gold-cup-electrodes?variant=9056028163), [Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958), or [Header Pin to Touch Proof Electrode Adapter](https://shop.openbci.com/collections/frontpage/products/touch-proof-electrode-cable-adapter?variant=31007211715).
+Use the 16 of the color coded cables that came with your Ultracortex MarkIV headset. Alternatively, you can use 16 of our [Gold Cup Electrodes](https://shop.openbci.com/collections/frontpage/products/openbci-gold-cup-electrodes?variant=9056028163), [Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958), or [Header Pin to Touch Proof Electrode Adapter](https://shop.openbci.com/collections/frontpage/products/touch-proof-electrode-cable-adapter?variant=31007211715).
 
 Connect Cyton bottom pins `N1P` through `N8P` to the cables, shown above. Then, connect the remaining 8 cables to Daisy bottom pins `N1P` through `N8P`. the cable colors should be in this order: gray, purple, blue, green, yellow, orange, red, and brown.
 For best results, when plugging female header pins onto the OpenBCI board, orient the sides with the 'silver latch bit' facing toward you since that side is a tiny bit wider than 0.1".

diff --git a/website/docs/GettingStarted/Boards/02-Ganglion_Getting_Started_Guide.md b/website/docs/GettingStarted/Boards/02-Ganglion_Getting_Started_Guide.md
@@ -17,7 +17,7 @@ This guide will walk you through setting up your Ganglion, connecting it to your
 3.  Lithium battery and USB charger OR 6V battery pack (AA batteries not included)
 4.  Board Case
 5.  EEG electrodes: OpenBCI [Gold Cup Electrodes](http://shop.openbci.com/collections/frontpage/products/openbci-gold-cup-electrodes?variant=9056028163), or your own electrodes, and [Electrode Paste](https://shop.openbci.com/products/ten20-conductive-paste-8oz-jar) 
-6.  or EMG electrodes: [Snap Electrode Cables](http://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958) and [Snap Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack).
+6.  or EMG electrodes: [Snap Electrode Cables](http://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958) and [Snap Electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack).
 7.  A computer connected to the internet
 
 ### 1. Your Ganglion

diff --git a/website/docs/Policies/Refund_Policy.md b/website/docs/Policies/Refund_Policy.md
@@ -33,7 +33,7 @@ We do **not** accept returns for the following items if they have been opened or
 - Electrode Cap Gel
 - Gold Cup Electrodes
 - Header Pin to Touch Proof Electrode Adapter
-- EMG/ECG Snap Electrode Cables
+- Snap Electrode Cables (EMG/ECG/EEG)
 - Kendall EMG/ECG Foam Solid Gel Electrodes
 - Hydro-link Replacements
 

diff --git a/website/docs/Software/OpenBCISoftware/NeuroFly_Toolkit.md b/website/docs/Software/OpenBCISoftware/NeuroFly_Toolkit.md
@@ -9,7 +9,7 @@ This tutorial will show you how to control a joystick using EMG data with the Op
 
 1.  OpenBCI [Cyton Board](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel?variant=38958638542) or [Ganglion Board](https://shop.openbci.com/products/ganglion-board)
 2.  [Disposable gel electrodes](https://shop.openbci.com/products/kendall-emg-ecg-foam-solid-gel-electrodes-30-pack) or [IDUN Dryode](https://shop.openbci.com/collections/frontpage/products/idun-dryode-kit)
-3.  [EMG/ECG Snap Electrode Cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables?variant=32372786958)
+3.  [Snap Electrode Cables (EMG/ECG/EEG)](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg?variant=32372786958)
 4.  Computer with downloaded [OpenBCI GUI](Software/OpenBCISoftware/01-OpenBCI_GUI.md). **Be sure to use [OpenBCI GUI v5.2.0](https://github.com/OpenBCI/OpenBCI_GUI/releases/latest) or later**.
 
 ## Video Walkthrough

diff --git a/website/docs/ThirdParty/IDUN_Dryode/Dryode_Guide.md b/website/docs/ThirdParty/IDUN_Dryode/Dryode_Guide.md
@@ -7,6 +7,6 @@ title: "IDUN Dryode"
 
 We are very excited to work with IDUN Technologies to offer this affordable, high-quality biosensing kit to our community.
 
-The Dryode™ offers waterproof, research-grade signal quality with the ease of a consumer product. This state-of-the-art flexible dry electrode is designed for biopotential data acquisition (ECG, EMG, and EEG). It can be connected to the OpenBCI [Cyton](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel), [CytonDaisy](https://shop.openbci.com/collections/frontpage/products/cyton-daisy-biosensing-boards-16-channel), or [Ganglion board](https://shop.openbci.com/collections/frontpage/products/ganglion-board) using OpenBCI [snap electrode cables](https://shop.openbci.com/collections/frontpage/products/emg-ecg-snap-electrode-cables), and is also compatible with most standard snap electrode cables.
+The Dryode™ offers waterproof, research-grade signal quality with the ease of a consumer product. This state-of-the-art flexible dry electrode is designed for biopotential data acquisition (ECG, EMG, and EEG). It can be connected to the OpenBCI [Cyton](https://shop.openbci.com/collections/frontpage/products/cyton-biosensing-board-8-channel), [CytonDaisy](https://shop.openbci.com/collections/frontpage/products/cyton-daisy-biosensing-boards-16-channel), or [Ganglion board](https://shop.openbci.com/collections/frontpage/products/ganglion-board) using OpenBCI [snap electrode cables](https://shop.openbci.com/collections/frontpage/products/snap-electrode-cables-emg-ecg-eeg), and is also compatible with most standard snap electrode cables.
 
 Head over to the [EMG Getting Started Guide](GettingStarted/Biosensing-Setups/02-EMG-Setup.md) to learn how to connect the EMG setup!