Skip to content

Commit e6286d6

Browse files
JosipKuciJosipKuci
committed
rename internalIO and externalIO objects to expander1 and expander2 respectively
1 parent c33c047 commit e6286d6

44 files changed

Lines changed: 585 additions & 585 deletions

File tree

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

‎examples/Inkplate10/Advanced/Communications/Inkplate10_Qwiic/Inkplate10_Qwiic.ino‎

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -58,8 +58,8 @@ void setup()
5858
display.setCursor(0, 0);
5959
display.println("Inkplate I2C Scanner");
6060
display.display();
61-
display.internalIO.digitalWrite(3,HIGH, true);
62-
display.internalIO.digitalWrite(4,HIGH, true);
61+
display.expander1.digitalWrite(3,HIGH, true);
62+
display.expander1.digitalWrite(4,HIGH, true);
6363

6464
// Initialize I2C and Serial
6565
//Wire.begin();

‎examples/Inkplate10/Advanced/IO/Inkplate10_IO_Expanders/Inkplate10_IO_Expanders.ino‎

Lines changed: 6 additions & 6 deletions
Original file line numberDiff line numberDiff line change
@@ -64,18 +64,18 @@ void setup()
6464
display.begin();
6565

6666
// Configure LED pin on both IO expanders
67-
display.externalIO.pinMode(LED_PIN, OUTPUT); // IO Expander 2
68-
display.internalIO.pinMode(LED_PIN, OUTPUT); // IO Expander 1
67+
display.expander2.pinMode(LED_PIN, OUTPUT); // IO Expander 2
68+
display.expander1.pinMode(LED_PIN, OUTPUT); // IO Expander 1
6969
}
7070

7171
void loop()
7272
{
7373
// External IO Expander (IO Expander 2)
7474
for (int i = 0; i < 5; i++)
7575
{
76-
display.externalIO.digitalWrite(LED_PIN, HIGH);
76+
display.expander2.digitalWrite(LED_PIN, HIGH);
7777
delay(500);
78-
display.externalIO.digitalWrite(LED_PIN, LOW);
78+
display.expander2.digitalWrite(LED_PIN, LOW);
7979
delay(500);
8080
}
8181

@@ -84,9 +84,9 @@ void loop()
8484
// Internal IO Expander (IO Expander 1)
8585
for (int i = 0; i < 5; i++)
8686
{
87-
display.internalIO.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR);
87+
display.expander1.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR);
8888
delay(500);
89-
display.internalIO.digitalWrite(LED_PIN, LOW, IO_INT_ADDR);
89+
display.expander1.digitalWrite(LED_PIN, LOW, IO_INT_ADDR);
9090
delay(500);
9191
}
9292

‎examples/Inkplate13SPECTRA/Advanced/IO/Inkplate13SPECTRA_External_IO_Expander/Inkplate13SPECTRA_External_IO_Expander.ino‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -31,16 +31,16 @@ Inkplate display; // Create an object on Inkplate library and also set library i
3131
void setup()
3232
{
3333
display.begin(); // Init Inkplate library (you should call this function ONLY ONCE)
34-
display.internalIO.pinMode(LED_PIN,
34+
display.expander1.pinMode(LED_PIN,
3535
OUTPUT); // Set P1-7 to output. On that pin, we sholud connect LED with current limiting resistor
3636
// If we do not specify which IO expander we want to use, by the default external IO
3737
// expander will be used of the one with header named IO Expander 2.
3838
}
3939

4040
void loop()
4141
{
42-
display.internalIO.digitalWrite(LED_PIN, LOW); // Set output to low (LED does not light up)
42+
display.expander1.digitalWrite(LED_PIN, LOW); // Set output to low (LED does not light up)
4343
delay(1000); // Wait for one second
44-
display.internalIO.digitalWrite(LED_PIN, HIGH); // Set output to high (LED lights up)
44+
display.expander1.digitalWrite(LED_PIN, HIGH); // Set output to high (LED lights up)
4545
delay(1000); // Wait for one second
4646
}

‎examples/Inkplate4TEMPERA/Advanced/IO/Inkplate4TEMPERA_IO_Expanders/Inkplate4TEMPERA_IO_Expanders.ino‎

Lines changed: 6 additions & 6 deletions
Original file line numberDiff line numberDiff line change
@@ -65,18 +65,18 @@ void setup()
6565
display.begin();
6666

6767
// Configure LED pin on both IO expanders
68-
display.externalIO.pinMode(LED_PIN, OUTPUT); // IO Expander 2
69-
display.internalIO.pinMode(LED_PIN, OUTPUT); // IO Expander 1
68+
display.expander2.pinMode(LED_PIN, OUTPUT); // IO Expander 2
69+
display.expander1.pinMode(LED_PIN, OUTPUT); // IO Expander 1
7070
}
7171

7272
void loop()
7373
{
7474
// External IO Expander (IO Expander 2)
7575
for (int i = 0; i < 5; i++)
7676
{
77-
display.externalIO.digitalWrite(LED_PIN, HIGH);
77+
display.expander2.digitalWrite(LED_PIN, HIGH);
7878
delay(500);
79-
display.externalIO.digitalWrite(LED_PIN, LOW);
79+
display.expander2.digitalWrite(LED_PIN, LOW);
8080
delay(500);
8181
}
8282

@@ -85,9 +85,9 @@ void loop()
8585
// Internal IO Expander (IO Expander 1)
8686
for (int i = 0; i < 5; i++)
8787
{
88-
display.internalIO.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR);
88+
display.expander1.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR);
8989
delay(500);
90-
display.internalIO.digitalWrite(LED_PIN, LOW, IO_INT_ADDR);
90+
display.expander1.digitalWrite(LED_PIN, LOW, IO_INT_ADDR);
9191
delay(500);
9292
}
9393

‎examples/Inkplate4TEMPERA/Diagnostics/Inkplate4TEMPERA_Factory_Programming_VCOM/Inkplate4TEMPERA_Factory_Programming_VCOM.ino‎

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -256,7 +256,7 @@ uint8_t writeVCOMToEEPROM(double v)
256256
int vcomL = vcom & 0xFF;
257257

258258
// Set PCAL pin where TPS65186 INT pin is connectet to input pull up
259-
display.internalIO.pinMode(6, INPUT_PULLUP);
259+
display.expander1.pinMode(6, INPUT_PULLUP);
260260

261261
// First power up TPS65186 so we can communicate with it
262262
display.einkOn();
@@ -279,7 +279,7 @@ uint8_t writeVCOMToEEPROM(double v)
279279
do
280280
{
281281
delay(1);
282-
} while (display.internalIO.digitalRead(6));
282+
} while (display.expander1.digitalRead(6));
283283

284284
// Clear Interrupt flag by reading INT1 register
285285
readReg(0x07);

‎examples/Inkplate4TEMPERA/Diagnostics/Inkplate4TEMPERA_Factory_Programming_VCOM/test.cpp‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -636,8 +636,8 @@ int checkGestureSensor(int _gestTimeout, String *gesture)
636636
// Finally, enable the light sensor
637637

638638
// Set the interrupt chain from the APDS, to the GPIO expander to the ESP32
639-
display.internalIO.pinMode(9, INPUT);
640-
display.internalIO.setIntPin(9);
639+
display.expander1.pinMode(9, INPUT);
640+
display.expander1.setIntPin(9);
641641
attachInterrupt(digitalPinToInterrupt(34), ioExpanderISR, CHANGE);
642642

643643
// Clear out any previous detected gestures.
@@ -652,7 +652,7 @@ int checkGestureSensor(int _gestTimeout, String *gesture)
652652
// If the APDS interrupt was read
653653
if (apdsIntFlag)
654654
{
655-
if (!display.internalIO.digitalRead(9, IO_INT_ADDR))
655+
if (!display.expander1.digitalRead(9, IO_INT_ADDR))
656656
{
657657
// Get the gesture
658658
if (display.apds9960.isGestureAvailable())

‎examples/Inkplate4TEMPERA/Projects/Inkplate4TEMPERA_Image_Frame_Gesture/Inkplate4TEMPERA_Image_Frame_Gesture.ino‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -282,8 +282,8 @@ void deepSleep()
282282
display.sdCardSleep();
283283

284284
// First, configure the interrupt from APDS to the GPIO expander
285-
display.internalIO.pinMode(9, INPUT_PULLUP);
286-
display.internalIO.setIntPin(9);
285+
display.expander1.pinMode(9, INPUT_PULLUP);
286+
display.expander1.setIntPin(9);
287287

288288
// Now, the internal GPIO expander will fire an interrupt on it's INT pin
289289
// On pin change of pin 9
@@ -295,7 +295,7 @@ void deepSleep()
295295
esp_sleep_enable_ext0_wakeup(GPIO_NUM_34, LOW);
296296

297297
// Just in case, wait until the APDS interrupt clears
298-
while (!display.internalIO.digitalRead(9))
298+
while (!display.expander1.digitalRead(9))
299299
{
300300
delay(10);
301301
}

‎examples/Inkplate5/Advanced/IO/Inkplate5_IO_Expanders/Inkplate5_IO_Expanders.ino‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -62,14 +62,14 @@ Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and als
6262
void setup()
6363
{
6464
display.begin(); // Init Inkplate library (you should call this function ONLY ONCE)
65-
display.internalIO.pinMode(LED_PIN, OUTPUT); // Set P1-7 to output. On that pin, we sholud connect LED with current
65+
display.expander1.pinMode(LED_PIN, OUTPUT); // Set P1-7 to output. On that pin, we sholud connect LED with current
6666
// limiting resistor and specify that we want use internal IO expander
6767
}
6868

6969
void loop()
7070
{
71-
display.internalIO.digitalWrite(LED_PIN, LOW, IO_INT_ADDR); // Set output to low (LED does not light up)
71+
display.expander1.digitalWrite(LED_PIN, LOW, IO_INT_ADDR); // Set output to low (LED does not light up)
7272
delay(1000); // Wait for one second
73-
display.internalIO.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR); // Set output to high (LED lights up)
73+
display.expander1.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR); // Set output to high (LED lights up)
7474
delay(1000); // Wait for one second
7575
}

‎examples/Inkplate5V2/Advanced/IO/Inkplate5V2_IO_Expanders/Inkplate5V2_IO_Expanders.ino‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -59,14 +59,14 @@ Inkplate display(INKPLATE_1BIT); // Create an object on Inkplate library and als
5959
void setup()
6060
{
6161
display.begin(); // Init Inkplate library (you should call this function ONLY ONCE)
62-
display.internalIO.pinMode(LED_PIN, OUTPUT); // Set P1-7 to output. On that pin, we sholud connect LED with current
62+
display.expander1.pinMode(LED_PIN, OUTPUT); // Set P1-7 to output. On that pin, we sholud connect LED with current
6363
// limiting resistor and specify that we want use internal IO expander
6464
}
6565

6666
void loop()
6767
{
68-
display.internalIO.digitalWrite(LED_PIN, LOW, IO_INT_ADDR); // Set output to low (LED does not light up)
68+
display.expander1.digitalWrite(LED_PIN, LOW, IO_INT_ADDR); // Set output to low (LED does not light up)
6969
delay(1000); // Wait for one second
70-
display.internalIO.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR); // Set output to high (LED lights up)
70+
display.expander1.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR); // Set output to high (LED lights up)
7171
delay(1000); // Wait for one second
7272
}

‎examples/Inkplate6/Advanced/IO/Inkplate6_IO_Expanders/Inkplate6_IO_Expanders.ino‎

Lines changed: 6 additions & 6 deletions
Original file line numberDiff line numberDiff line change
@@ -64,18 +64,18 @@ void setup()
6464
display.begin();
6565

6666
// Configure LED pin on both IO expanders
67-
display.externalIO.pinMode(LED_PIN, OUTPUT); // IO Expander 2
68-
display.internalIO.pinMode(LED_PIN, OUTPUT); // IO Expander 1
67+
display.expander2.pinMode(LED_PIN, OUTPUT); // IO Expander 2
68+
display.expander1.pinMode(LED_PIN, OUTPUT); // IO Expander 1
6969
}
7070

7171
void loop()
7272
{
7373
// External IO Expander (IO Expander 2)
7474
for (int i = 0; i < 5; i++)
7575
{
76-
display.externalIO.digitalWrite(LED_PIN, HIGH);
76+
display.expander2.digitalWrite(LED_PIN, HIGH);
7777
delay(500);
78-
display.externalIO.digitalWrite(LED_PIN, LOW);
78+
display.expander2.digitalWrite(LED_PIN, LOW);
7979
delay(500);
8080
}
8181

@@ -84,9 +84,9 @@ void loop()
8484
// Internal IO Expander (IO Expander 1)
8585
for (int i = 0; i < 5; i++)
8686
{
87-
display.internalIO.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR);
87+
display.expander1.digitalWrite(LED_PIN, HIGH, IO_INT_ADDR);
8888
delay(500);
89-
display.internalIO.digitalWrite(LED_PIN, LOW, IO_INT_ADDR);
89+
display.expander1.digitalWrite(LED_PIN, LOW, IO_INT_ADDR);
9090
delay(500);
9191
}
9292

0 commit comments

Comments
 (0)