style: normalize Android RST indentation

juliosuas · juliosuas · commit 74234c0c1198 · 2026-06-10T10:55:10.000-06:00
Signed-off-by: Julio &lt;juliosuas@gmail.com&gt;
diff --git a/source/android/Application_Notes_Camera.rst b/source/android/Application_Notes_Camera.rst
@@ -23,9 +23,9 @@ The following hardware is required to use the CSI-2 camera:
 
 - ALINX ov5640 sensor module (AN5641)
 
-  .. image:: /images/alinx_ov5640.jpg
-    :width: 300
-    :alt: alinx_ov5640
+   .. image:: /images/alinx_ov5640.jpg
+      :width: 300
+      :alt: alinx_ov5640
 
 .. ifconfig:: CONFIG_part_variant in ('AM62X')
 
diff --git a/source/android/Application_Notes_Sample_Maps_App.rst b/source/android/Application_Notes_Sample_Maps_App.rst
@@ -29,15 +29,15 @@ Launching the app
 
 .. ifconfig:: CONFIG_part_variant in ('AM62X')
 
-      * Boot the EVM with binaries built using ``am62x_car-bp2a-userdebug`` lunch target
+   * Boot the EVM with binaries built using ``am62x_car-bp2a-userdebug`` lunch target
 
 .. ifconfig:: CONFIG_part_variant in ('AM62PX')
 
-      * Boot the EVM with binaries built using ``am62p_car-bp2a-userdebug`` lunch target
+   * Boot the EVM with binaries built using ``am62p_car-bp2a-userdebug`` lunch target
 
 .. ifconfig:: CONFIG_part_variant in ('AM67A')
 
-      * Boot the EVM with binaries built using ``am67a_car-bp2a-userdebug`` lunch target
+   * Boot the EVM with binaries built using ``am67a_car-bp2a-userdebug`` lunch target
 
 * The SnappMaps application should be visible by default on the home screen
 
diff --git a/source/android/Overview_Building_the_SDK.rst b/source/android/Overview_Building_the_SDK.rst
@@ -81,49 +81,49 @@ Where ``<BUILD_TARGET>`` is listed in the table below :
 
 .. ifconfig:: CONFIG_part_variant in ('AM62X')
 
-    ============================= ============================
-    Android Build type            Build target
-    ============================= ============================
-    AM62X-SK Tablet userdebug       ``am62x-bp2a-userdebug``
-    AM62X-SK Tablet user            ``am62x-bp2a-user``
-    AM62X-SK Car userdebug          ``am62x_car-bp2a-userdebug``
-    AM62X-SK Car user               ``am62x_car-bp2a-user``
-    ============================= ============================
+   ============================= ============================
+   Android Build type            Build target
+   ============================= ============================
+   AM62X-SK Tablet userdebug       ``am62x-bp2a-userdebug``
+   AM62X-SK Tablet user            ``am62x-bp2a-user``
+   AM62X-SK Car userdebug          ``am62x_car-bp2a-userdebug``
+   AM62X-SK Car user               ``am62x_car-bp2a-user``
+   ============================= ============================
 
-    The recommended ``<BUILD_TARGET>`` is ``am62x-bp2a-userdebug``.
+   The recommended ``<BUILD_TARGET>`` is ``am62x-bp2a-userdebug``.
 
 .. ifconfig:: CONFIG_part_variant in ('AM62PX')
 
-    ============================= ============================
-    Android Build type            Build target
-    ============================= ============================
-    AM62PX-SK Tablet userdebug       ``am62p-bp2a-userdebug``
-    AM62PX-SK Tablet user            ``am62p-bp2a-user``
-    AM62PX-SK Car userdebug          ``am62p_car-bp2a-userdebug``
-    AM62PX-SK Car user               ``am62p_car-bp2a-user``
-    ============================= ============================
+   ============================= ============================
+   Android Build type            Build target
+   ============================= ============================
+   AM62PX-SK Tablet userdebug       ``am62p-bp2a-userdebug``
+   AM62PX-SK Tablet user            ``am62p-bp2a-user``
+   AM62PX-SK Car userdebug          ``am62p_car-bp2a-userdebug``
+   AM62PX-SK Car user               ``am62p_car-bp2a-user``
+   ============================= ============================
 
-    The recommended ``<BUILD_TARGET>`` is ``am62p-bp2a-userdebug``.
+   The recommended ``<BUILD_TARGET>`` is ``am62p-bp2a-userdebug``.
 
 .. ifconfig:: CONFIG_part_variant in ('AM67A')
 
-    ============================= ============================
-    Android Build type            Build target
-    ============================= ============================
-    AM67A-EVM Tablet userdebug       ``am67a-bp2a-userdebug``
-    AM67A-EVM Tablet user            ``am67a-bp2a-user``
-    AM67A-EVM Car userdebug          ``am67a_car-bp2a-userdebug``
-    AM67A-EVM Car user               ``am67a_car-bp2a-user``
-    ============================= ============================
+   ============================= ============================
+   Android Build type            Build target
+   ============================= ============================
+   AM67A-EVM Tablet userdebug       ``am67a-bp2a-userdebug``
+   AM67A-EVM Tablet user            ``am67a-bp2a-user``
+   AM67A-EVM Car userdebug          ``am67a_car-bp2a-userdebug``
+   AM67A-EVM Car user               ``am67a_car-bp2a-user``
+   ============================= ============================
 
-    The recommended ``<BUILD_TARGET>`` is ``am67a-bp2a-userdebug``.
+   The recommended ``<BUILD_TARGET>`` is ``am67a-bp2a-userdebug``.
 
 It's possible to customize the standard build (``m``), by passing build flags.
 For example, the following enables ADB on user builds:
 
 .. code-block:: console
 
-  $ TARGET_ADB_USER_ENABLE=true m
+   $ TARGET_ADB_USER_ENABLE=true m
 
 The following build flags are available. **Default** values are **highlighted**.
 
@@ -160,5 +160,5 @@ To proceed to flash Android, see :ref:`android-flashing`.
 
 .. ifconfig:: CONFIG_part_variant in ('AM62X')
 
-    The android images generated for the AM62X-SK EVM are compatible with the Beagle Play board.
-    For flashing the Beagle Play, see the :ref:`beagleplay-app-note`.
+   The android images generated for the AM62X-SK EVM are compatible with the Beagle Play board.
+   For flashing the Beagle Play, see the :ref:`beagleplay-app-note`.
diff --git a/source/android/Overview_Flashing.rst b/source/android/Overview_Flashing.rst
@@ -153,7 +153,7 @@ Once the build is complete, follow the steps below to flash the images to eMMC.
 
        .. ifconfig:: CONFIG_part_variant in ('AM62PX')
 
-         .. code-block:: console
+          .. code-block:: console
 
              # If you are using binaries built locally
              $ cd out/target/product/am62p
@@ -167,7 +167,7 @@ Once the build is complete, follow the steps below to flash the images to eMMC.
 
        .. ifconfig:: CONFIG_part_variant in ('AM67A')
 
-         .. code-block:: console
+          .. code-block:: console
 
              # If you are using binaries built locally
              $ cd out/target/product/am67a
@@ -390,9 +390,9 @@ Once the build is complete, follow the steps below to flash the images to eMMC.
     2. Restart the flashing from :ref:`U-Boot environment <step_5_flashing_instructions>`.
 
 
-5. Once the flashing is complete, power off the board
+#. Once the flashing is complete, power off the board
 
-6. Change boot mode DIP switches to boot from eMMC user partitions and power cycle the board:
+#. Change the boot mode switches to boot from eMMC user partitions and power cycle the board:
 
    .. ifconfig:: CONFIG_part_variant in ('AM62X')
 
@@ -437,5 +437,4 @@ Once the build is complete, follow the steps below to flash the images to eMMC.
            - 00000000
 
 
-7. Board should boot the Android images now.
-
+#. Board should boot the Android images now.
diff --git a/source/boards/beagle/BeagleY-AI/android/Application_Notes_BeagleY_AI.rst b/source/boards/beagle/BeagleY-AI/android/Application_Notes_BeagleY_AI.rst
@@ -43,14 +43,14 @@ Building the image
 To build the image you need to build the image for the am67a-evm.
 The kernel includes the appropriate device tree and the proper bootloaders are deployed.
 
-   .. code-block:: console
+.. code-block:: console
 
-      $ source build/envsetup.sh
-      $ lunch am67a-bp2a-user/userdebug
-      $ m TARGET_SDCARD_BOOT=true
-      $ sudo flashall --board am67a-beagley-ai --sdcard=/dev/sdX
+   $ source build/envsetup.sh
+   $ lunch am67a-bp2a-user/userdebug
+   $ m TARGET_SDCARD_BOOT=true
+   $ sudo flashall --board am67a-beagley-ai --sdcard=/dev/sdX
 
-   TARGET_SDCARD_BOOT=true is required since the beagley-ai does not have an eMMC.
+Set ``TARGET_SDCARD_BOOT=true`` since the beagley-ai does not have an eMMC.
 
 **************************
 Initial flashing procedure
@@ -125,8 +125,8 @@ Flashing Android requires to use the sdcard.
 
    .. code-block:: console
 
-     Finished. Total time: 112.819s
-     -------------------------------
-     flashing done, you can issue the 'fastboot reboot' command
+      Finished. Total time: 112.819s
+      -------------------------------
+      flashing done, you can issue the 'fastboot reboot' command
 
    At which point the board is flash and can reboot. It will boot to Android.
