kicad.svg (#1137)

* Create mira.mehdi

* Update mira.mehdi

* Update mira.mehdi

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi

* Create index.md

* Create webp

* Create svg

* Rename webp to hardware.webp

* Update index.md

* Update index.md

* Update index.md

* Update index.md

* Update index.md

* Rename hardware.webp to diagram.webp

* Diagram.webp

* Rename Diagram.webp.png to Diagram.webp

* Update index.md

* Update index.md

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/diagram.webp

* Update index.md

* Rename svg to KiCad.svg

* Update index.md

* Update index.md

* Update index.md

* Update index.md

* Update index.md

* Update index.md

* Rename KiCad.svg to kicad.svg

* Rename Diagram.webp to diagram.webp

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/kicad.svg

* Update index.md

* Rename diagram.webp to diagram.png

* Update index.md

* change image format

* remove reference to kicad

* Add files via upload

* Add files via upload

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/kicad.svg

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/KiCadMA.svg

* Add files via upload

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/kicad.svg

* Add files via upload

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/kicad.svg

* Add files via upload

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/kicad (1).svg

* Add files via upload

* Update index.md

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/kicad.svg

* Add files via upload

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/kicad.svg

* Add files via upload

* Update index.md

* Add files via upload

* Update index.md

* Add hardware diagram image to project documentation

Added a hardware diagram image to the documentation.

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/hardware.jpg

* Add files via upload

* Replace hardware.jpg with hardware.webp in index.md

* Add Bill of Materials section to project documentation

Added a Bill of Materials section to the documentation.

* Delete website/versioned_docs/version-fils_en/project/2026/mira.mehdi/hardware.webp

* Add files via upload

* Rename hardware-doc2.webp to hardware.webp

Author: MiraB8421

website/versioned_docs/version-fils_en/project/2026/mira.mehdi/hardware.webp

@@ -43,6 +43,9 @@ This system is built using **STM32 NUCLEO-U545RE-Q** which coordinates all funct
 The system is built around the STM32 NUCLEO-U545RE microcontroller, which acts as the main controller responsible for processing data and coordinating all modules. Two NFC readers are used to scan the vehicle’s NFC tag at the payment and exit stations for verification. Two SG90 servo motors control the opening and closing of the entry and exit barriers, while a LCD display shows system messages such as payment status. A green LED indicates successful payment and access approval, whereas a red LED with a buzzer signals payment denied. An ultrasonic sensor detects vehicle presence at the entrance to open the berrier, and an IR sensor detects coin insertion at the payment station. However, all the coennections are on the breadboard and using jumper wires.
 
 ## Schematics
+![Schematic diagram](kicad.svg)
+![Schematic diagram](hardware.webp)
+