The name of Support for ABS in Filament Grouping is confusing

[human890209]

Bambu Studio Version

win-v02.06.00.51-20260417160415

Where is the application from?

Bambu Lab GitHub releases

OS version

win10

Additional system information

No response

Printer

X2D

How to reproduce

1. use ABS and Support for ABS
2. go to filament grouping
3. Two ABS there. Not ABS and Support for ABS

Actual results

2 ABS

Expected results

ABS and Support for ABS

Project file & Debug log uploads

Checklist of files to include

• Log file
• Project file

[BenJule]

The root cause is in two places:

1. FilamentMapDialog.cpp reads the raw filament_type config values directly (e.g. "ABS"). Support filaments store their base type here, so both a regular ABS and a "Support for ABS" filament appear identically as "ABS".

2. PrintConfig.cpp::get_filament_type() already handles this and returns "Sup.ABS" for display — but only when filament_id is absent. The branch that runs when a filament_id is present handled PLA-S and PA-S but was missing the ABS-S case, causing it to fall through to the raw "ABS" value.

Fix applied in PR #10829:

• FilamentMapDialog.cpp: replace the direct option read with a loop over get_filament_type() so the display name ("Sup.ABS") is used.
• PrintConfig.cpp: add the missing ABS-S / Sup.ABS case to the filament_id-present branch.

[BenJule]

Submitted a fix in PR #10861.

Root cause: reads config values directly without checking , so ABS and Support for ABS both appear as "ABS".

Fix: Prepend to the type string for any slot whose active preset has , matching the naming convention already used by elsewhere in the UI.

[BenJule]

Update: the fix in PR #10829 now covers both entry points to the filament grouping dialog (the auto-popup before slicing via FilamentMapDialog.cpp, and the manual open via Plater.cpp). PR #10861 which was filed separately for the Plater.cpp path has been closed as it is included in #10829.