Skip to content

feat: show time-to-next-pause in Device Tab print status#10819

Open
BenJule wants to merge 13 commits into
bambulab:masterfrom
BenJule:feat/time-to-next-pause
Open

feat: show time-to-next-pause in Device Tab print status#10819
BenJule wants to merge 13 commits into
bambulab:masterfrom
BenJule:feat/time-to-next-pause

Conversation

@BenJule
Copy link
Copy Markdown

@BenJule BenJule commented May 20, 2026

Summary

  • Adds a "Pause in Xh Ym" label to the printing task panel in the Device Tab
  • The label appears whenever a scheduled PausePrint exists ahead of the current layer and hides when no pause is pending
  • The estimated time is derived from the locally sliced gcode (layer Z-heights + custom gcode entries) and the printer's reported remaining time, updated on every status tick

Implementation

  • PrintingTaskPanel gains a new wxStaticText* m_staticText_next_pause widget placed between the layer counter and the progress-left label
  • update_next_pause(int seconds_to_pause) shows/hides and formats the label using the existing get_bbl_monitor_time_dhm() helper
  • In StatusPanel::update_subtask(), after the left-time update, the code reads GCodeViewer::get_layers_zs() and get_custom_gcode_per_print_z() from the preview canvas, finds the first PausePrint above the current layer's Z, and estimates the time proportionally from mc_left_time
  • Entire calculation is wrapped in try/catch so a missing slice result is silently ignored

Test plan

  • Load a model, add a layer-change pause via "Pause at layer" in the slicer, slice it, send to printer
  • While printing, open the Device Tab — "Pause in …" should appear next to the layer counter
  • After the pause layer is passed, label should disappear
  • Without any scheduled pause, label should never appear
  • Works when no project is sliced / preview canvas has no gcode loaded

Closes #10632
Closes #10562

@BenJule BenJule force-pushed the feat/time-to-next-pause branch from 1e6d3e5 to e07fd2c Compare May 21, 2026 08:31
BenJule added 13 commits May 21, 2026 10:52
@BenJule
ci: trigger 'Build all' workflow on pushes to master branch
ef2b6c7 
The upstream build_all.yml only listed 'main' as a push trigger.
BenJule/BambuStudio uses 'master' as its default branch, so CI never
fired on fork-local pushes. Adding 'master' alongside 'main' makes
the full multi-platform build run when master is updated.
@BenJule
ci: remove 'main' from push trigger, keep only 'master'
7b7b27a
@BenJule
feat(fila_manager): add i18n support — replace hardcoded Chinese with…
aa975f0 
… locale files

The fila_manager web page was hardcoded in Chinese (lang="zh") with no
internationalization support. This commit adds a lightweight i18n system:

- Add locales/en.json and locales/zh_CN.json with all UI strings
- Add t(key) / tf(key, n) translation helpers loaded at startup
- Apply translations via data-i18n / data-i18n-placeholder attributes in HTML
- Replace all hardcoded Chinese strings in index.js with t() calls
- Language is resolved from the ?lang= URL parameter passed by C++
@BenJule
fix: correct 'percision' typo to 'precision' in motion calibration UI…
1014d09 
… strings

Two printer status strings shown during calibration used the misspelling
"percision" instead of "precision". Also fix lang="zh-CN" in
NozzleListTable.html (the table content is set by C++ at runtime).

All .po and .pot msgid entries updated to match the corrected source strings.
@BenJule
fix: correct grammar and punctuation in English UI strings
cc7ae3a 
- 'Problem occured' → 'Problem occurred' (MediaPlayCtrl.cpp)
- 'When enable spiral vase mode' → 'When enabling ...' (SelectMachine.cpp, SyncAmsInfoDialog.cpp)
- 'connectors is out of object' → 'connectors are out of object' (GLGizmoAdvancedCut.cpp)
- 'Error:Detecting ...' → 'Error: Detecting ...' with spacing fixes (GLGizmoText.cpp)

Update all corresponding msgid entries in BambuStudio.pot and all 18 .po locale files.
@BenJule
fix: correct punctuation and grammar in UI warning/tip strings
45d8ced 
Fix missing spaces after 'Warning:', 'Error:', and 'Tip:' prefixes,
missing spaces after sentence-ending periods and commas, and several
grammar issues in strings that appear to originate from machine
translation:

- GLGizmoText.cpp: fix 9 Warning: strings (space + grammar)
  - 'Warning:create text fail.' → 'Warning: Text creation failed.'
  - 'Warning:text normal is error.' → 'Warning: Text normal has an error.'
  - 'Warning:Due to font upgrades,previous...' → proper spacing
  - 'reedit it will ok' → 'reedit it to fix the issue'
  - 'dragging text' → 'drag the text' (imperative form)
- GLGizmoMeasure.cpp: fix 3 Warning: strings + 'two different mesh' → 'meshes'
- GLGizmoSVG.cpp: fix 'Tip:If...' + missing comma + 'svg file' → 'SVG file'
- PlaterWorker.hpp: 'error occured' → 'error occurred'
- DeviceManager.cpp: missing spaces after period/comma + '(PLA...)' spacing
- BindDialog.cpp: 'device.Before', 'termsand', 'Use(collectively)' spacing
- ConfigManipulation.cpp: missing spaces after comma and period
- AMSSetting.cpp: missing space after '1 minute.'
- Preferences.cpp: 'tab.If change value' → 'tab. If you change this value'

Update all msgid entries in BambuStudio.pot and all 18 .po locale files.
@BenJule
fix: correct typos and wording in UI strings (batch 3)
7b38162 
- AuxiliaryDialog.cpp: 'Auxiliaryies' → 'Auxiliaries' (dialog title)
- FanControl.cpp: 'print qulity' → 'print quality'
- GLGizmoFlatten.cpp: 'too small,The' → 'too small. The' (comma → period)
- Monitor.cpp: 'Assistant(HMS)' → 'Assistant (HMS)' (space before parenthesis)
- AMSSetting.cpp: 'during  printing' → 'during printing' (double space)
- AMSDryControl.cpp + uiAmsHumidityPopup.cpp: 'Left Time' → 'Remaining Time'
- Plater.cpp: 'attrited' → 'worn' (non-standard word)

Update all corresponding msgid entries in BambuStudio.pot and all 18 .po
locale files.
@BenJule
feat(windows): add 'Follow system theme' option for dark mode
72231be 
On macOS, BambuStudio already auto-follows the system dark/light theme
via EVT_SYS_COLOUR_CHANGED. On Windows this handler was guarded with
#ifndef __WINDOWS__, so theme changes were silently ignored.

Changes:
- GUI_Utils.hpp: EVT_SYS_COLOUR_CHANGED now fires on Windows when
  'dark_mode_follow_system' is enabled; calls update_dark_config() and
  on_sys_color_changed() to refresh the UI
- GUI_App.cpp dark_mode(): if follow-system is enabled, query
  check_dark_mode() (system appearance) instead of the stored config;
  on startup, sync dark_color_mode config from system if follow-system
  is enabled
- MainFrame.cpp on_sys_color_changed(): call force_colors_update() and
  update_ui_from_settings() on all platforms (previously skipped on
  Windows), so a system-triggered theme change gets a full UI refresh
- Preferences.hpp/.cpp: add 'Follow system theme' checkbox below the
  manual 'Enable dark mode' toggle; when checked the manual toggle is
  disabled and the current system state is applied immediately

Resolves feature request bambulab#10800.
@BenJule
feat: add F1-F5 keyboard shortcuts and hex color input to color picker
44ed311 
- F1–F4 switch between the four main tabs (3D Editor, Preview, Monitor,
  Project); F5 triggers reslice when a model is loaded
- ColorPickerPopup gains a hex input field (#RRGGBB) below the custom
  color swatch; typing a valid 6-digit hex and pressing Enter applies
  the color and fires EVT_SELECTED_COLOR; clicking any swatch updates
  the hex field to match the selected color
@BenJule
feat: show version in title bar and add full MakerWorld site toggle
8859ece 
- update_title() now sets the topbar label to "Bambu Studio <version>"
  on Windows/Linux so the version is always visible without opening
  the About dialog (closes bambulab#10642)
- Preferences > Online Models gains a "Open full MakerWorld site"
  checkbox (config key makerworld_use_full_site); when enabled the
  Online Models tab loads the unrestricted makerworld.com pages
  instead of the /studio/webview simplified view, restoring access to
  comments, account management, and other features (closes bambulab#10801)
@BenJule
feat: dynamic title bar with dirty indicator and suppress cloud warning
332c662 
- update_title() now shows the open project filename and a leading '*'
  when there are unsaved changes, keeping the topbar in sync via the
  existing wxEVT_IDLE handler; title reverts to the app name + version
  when no project is open (closes bambulab#9987, closes bambulab#9989)
- Cloud connection failure dialog now uses RichMessageDialog with a
  "Don't show this warning again" checkbox; checking it sets config key
  suppress_cloud_warnings=1 so the dialog is permanently suppressed
  for offline/LAN-only workflows (closes bambulab#10589)
@BenJule
feat: auto-save, 0.1/0.01mm arrow steps, dark mode contrast fix
c034480 
- Preferences > General Settings: "Auto-save project every 5 minutes"
  checkbox (config key autosave_enabled); a wxTimer in MainFrame fires
  every 5 min and calls save_project() silently when the project has a
  filename, is dirty, and the option is enabled (closes bambulab#10334)
- Alt+Arrow moves selected objects by 0.1 mm; Alt+Shift+Arrow by
  0.01 mm; existing Shift+Arrow (1 mm) and plain Arrow (10 mm) are
  unchanged; added to the keyboard shortcuts dialog (closes bambulab#10194)
- LayerRangeEditor now explicitly sets background/foreground to the
  app's dark-mode palette colours after UpdateDarkUI(), fixing the
  unreadable contrast in the Height Range Modifier field on Linux dark
  mode (closes bambulab#10685)
@BenJule
feat: show time-to-next-pause in Device Tab print status
0b181c8 
Adds a "Pause in Xh Ym" label below the layer counter in the printing
task panel whenever a scheduled PausePrint exists ahead of the current
layer. The countdown is derived from the locally sliced gcode (layer
Z-heights + custom gcode entries) and the printer's reported remaining
time, updated on every status tick.

Closes bambulab#10632
Closes bambulab#10562
@BenJule BenJule force-pushed the feat/time-to-next-pause branch from e07fd2c to 0b181c8 Compare May 21, 2026 08:55
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

No reviews

Assignees

No one assigned

Labels

None yet

Projects

None yet

Milestone

No milestone

1 participant

@BenJule