diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 50d33738bb..dd45dd5cb1 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -7554,6 +7554,134 @@ { "name": "Generic TPU for AMS @BBL X2D 0.4 nozzle", "sub_path": "filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Eryone ABS+-HS @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone ABS+-HS @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone ABS-GF @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone ABS-GF @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone ASA-CF @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone ASA-CF @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone ASA-GF @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone ASA-GF @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PA-CF @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PA-CF @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PETG @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-CF @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-CF @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone petg-Galaxy @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone petg-Galaxy @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-GF @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-GF @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-Matte @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-Matte @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PLA+ @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PLA+ @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PLA+HS @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PLA+HS @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PLA-Matte @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PLA-Matte @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PLA-Matte HS @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PLA-Matte HS @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone PLA-Silk @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PLA-Silk @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone ppa-cf @BBL P1S 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone ppa-cf @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Eryone ABS-GF @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone ABS-GF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone ASA-CF @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone ASA-CF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone ASA-GF @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone ASA-GF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PA-CF @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PA-CF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PETG @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-CF @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-CF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone petg-Galaxy @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone petg-Galaxy @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-GF @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-GF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-Lite @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-Lite @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-Matte @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PETG-Matte @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PLA+ @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PLA+ @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone PLA+HS @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone PLA+HS @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle", + "sub_path": "filament/ERYONE/Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle.json" } ], "machine_list": [ diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ABS+-HS @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone ABS+-HS @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..d9fc2ec5d2 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ABS+-HS @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone ABS+-HS @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ABS+-HS @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone ABS+-HS @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..aba216a01d --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ABS+-HS @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone ABS+-HS @BBL P1S 0.4 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GPSA01", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "24", + "24" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "fan_max_speed": "20", + "fan_min_speed": "0", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA01" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..5e7a85c94d --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone ABS-GF @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..26daa156e0 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone ABS-GF @BBL H2D 0.4 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GPSB01", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "0" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEB01" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..039085fb9e --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone ABS-GF @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..a6d90d717b --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ABS-GF @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone ABS-GF @BBL P1S 0.4 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GPSA02", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "14", + "14" + ], + "nozzle_temperature": [ + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265" + ], + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "fan_max_speed": "20", + "fan_min_speed": "0", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA02" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..81227e080f --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone ASA-CF @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..4d7f35ba69 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone ASA-CF @BBL H2D 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GPSB02", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "0" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEB02" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..6dc7fd3bbe --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone ASA-CF @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..376ff86fc3 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-CF @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone ASA-CF @BBL P1S 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GPSA03", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "fan_max_speed": "20", + "fan_min_speed": "0", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA03" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..b7288909cf --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone ASA-GF @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..cac69e1526 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone ASA-GF @BBL H2D 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GPSB03", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "0" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "24", + "24" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEB03" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..09eb8fb0f1 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone ASA-GF @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..ac9cc2d3b1 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ASA-GF @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone ASA-GF @BBL P1S 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GPSA04", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "17", + "17" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "90", + "fan_max_speed": "20", + "fan_min_speed": "0", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA04" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..c494c068d7 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PA-CF @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..a1bdc1aa18 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PA-CF @BBL H2D 0.4 nozzle", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GPSB04", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "10" + ], + "fan_min_speed": [ + "0" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "80", + "hot_plate_temp_initial_layer": "80", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEB04" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..8fd83d9a20 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PA-CF @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..d72004d965 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PA-CF @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PA-CF @BBL P1S 0.4 nozzle", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GPSA05", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.93", + "0.93" + ], + "filament_max_volumetric_speed": [ + "10", + "10" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "hot_plate_temp": "80", + "hot_plate_temp_initial_layer": "80", + "fan_max_speed": "10", + "fan_min_speed": "0", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA05" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..7b2a2243e6 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..aae5ee67ea --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PETG @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSB05", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEB05" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..a38d3406e0 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..3ab33c11e3 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PETG @BBL P1S 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSA06", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.9975", + "0.9975" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "fan_max_speed": "50", + "fan_min_speed": "30", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEA06" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..b5a192b2d8 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..94c4bb88ca --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PETG-Burnt Titanium @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSB06", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEB06" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..0c5db8cdbb --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..4a8dda2195 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PETG-Burnt Titanium @BBL P1S 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSA07", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "fan_max_speed": "50", + "fan_min_speed": "30", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEA07" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..8e2d3477af --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-CF @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..69acc14793 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PETG-CF @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GPSB07", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEB07" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..f05eee8f69 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-CF @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..a0f9d3447b --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-CF @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PETG-CF @BBL P1S 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GPSA08", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "fan_max_speed": "50", + "fan_min_speed": "30", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEA08" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..730f5e5485 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-GF @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..9d95fa90cb --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PETG-GF @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSB08", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "17", + "17" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEB08" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..5b3e9514c1 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-GF @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..f61020b208 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-GF @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PETG-GF @BBL P1S 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSA09", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "13", + "13" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "fan_max_speed": "50", + "fan_min_speed": "30", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEA09" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Lite @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Lite @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..f17bbf10ec --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Lite @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-Lite @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Lite @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Lite @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..4b6fcc5717 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Lite @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PETG-Lite @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSB09", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEB09" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..5730c681e9 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-Matte @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..7e38fd1b5c --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PETG-Matte @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GPSB10", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEB10" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..2f188b54bf --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PETG-Matte @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..226c894f64 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PETG-Matte @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PETG-Matte @BBL P1S 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GPSA10", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "fan_max_speed": "50", + "fan_min_speed": "30", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEA10" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..5e8d2de253 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PLA+ @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..7e46e6e467 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PLA+ @BBL H2D 0.4 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GPSB11", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEB11" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..307c6fad0f --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PLA+ @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..b95757dbdb --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+ @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PLA+ @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GPSA11", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "17", + "17" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "fan_max_speed": "100", + "fan_min_speed": "80", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA11" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..f989be2d67 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PLA+HS @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..9105626720 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone PLA+HS @BBL H2D 0.4 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GPSB12", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "215", + "215" + ], + "nozzle_temperature_initial_layer": [ + "215", + "215" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEB12" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..172282db75 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PLA+HS @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..b394836d6f --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA+HS @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PLA+HS @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GPSA12", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "1.1", + "1.1" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "fan_max_speed": "100", + "fan_min_speed": "80", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA12" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..0700838b09 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PLA-Matte @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..f7eeb00a3f --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PLA-Matte @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GPSA13", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "1.07", + "1.07" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "fan_max_speed": "100", + "fan_min_speed": "80", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA13" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte HS @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte HS @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..26fbfb5004 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte HS @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PLA-Matte HS @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte HS @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte HS @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..59782ff040 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Matte HS @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PLA-Matte HS @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GPSA14", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "1.01", + "1.01" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "nozzle_temperature": [ + "215", + "215" + ], + "nozzle_temperature_initial_layer": [ + "215", + "215" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "fan_max_speed": "100", + "fan_min_speed": "80", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA14" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Silk @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Silk @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..3ee433d461 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Silk @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone PLA-Silk @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Silk @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Silk @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..68dc0f3323 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone PLA-Silk @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone PLA-Silk @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GPSA15", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "13", + "13" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "fan_max_speed": "100", + "fan_min_speed": "80", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA15" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..c3aa9b933e --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone petg-Galaxy @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..5f06c2bc37 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone petg-Galaxy @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSB13", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEB13" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..82e0c51caa --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone petg-Galaxy @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..2346163eab --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone petg-Galaxy @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone petg-Galaxy @BBL P1S 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GPSA16", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "hot_plate_temp": "70", + "hot_plate_temp_initial_layer": "70", + "fan_max_speed": "50", + "fan_min_speed": "30", + "close_fan_the_first_x_layers": "3", + "full_fan_speed_layer": "2", + "filament_id": "GFEA16" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle.info new file mode 100644 index 0000000000..4d29a88bb4 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..1e557be31b --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Eryone pla-Ultra Silk @BBL H2D 0.4 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GPSB14", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEB14" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..61e9e1ec47 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..ec1ddba82b --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone pla-Ultra Silk @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GPSA17", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12.3", + "12.3" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "hot_plate_temp": "55", + "hot_plate_temp_initial_layer": "55", + "fan_max_speed": "100", + "fan_min_speed": "80", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA17" +} diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ppa-cf @BBL P1S 0.4 nozzle.info b/resources/profiles/BBL/filament/ERYONE/Eryone ppa-cf @BBL P1S 0.4 nozzle.info new file mode 100644 index 0000000000..940a85c994 --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ppa-cf @BBL P1S 0.4 nozzle.info @@ -0,0 +1,2 @@ +[filament] +name = Eryone ppa-cf @BBL P1S 0.4 nozzle diff --git a/resources/profiles/BBL/filament/ERYONE/Eryone ppa-cf @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/ERYONE/Eryone ppa-cf @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..937a84087f --- /dev/null +++ b/resources/profiles/BBL/filament/ERYONE/Eryone ppa-cf @BBL P1S 0.4 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Eryone ppa-cf @BBL P1S 0.4 nozzle", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GPSA18", + "instantiation": "true", + "filament_vendor": [ + "Eryone" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "9", + "9" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "hot_plate_temp": "100", + "hot_plate_temp_initial_layer": "100", + "fan_max_speed": "10", + "fan_min_speed": "0", + "close_fan_the_first_x_layers": "1", + "full_fan_speed_layer": "0", + "filament_id": "GFEA18" +}