[43-dev]: Compatibility report ODroid N2 Plus

[MastaG]

Batocera build version

43-dev-eddc36c5b2 2026/02/05 06:22

Your architecture

ODroid N2 Plus

Your Graphic Processor Unit(s) (GPU)

Mali-G52

Issue description

Just wanted the point out some low hanging fruit in the bootlog below.
Missing modules and kernel configuration.
See the FATAL's .

Detailed reproduction steps

Just flashed the butterfly image.

Details of any attempts to fix this yourself

Sorry I do not have time, this is just a report.

Details of any modifications you have made to Batocera.

None

Logs and data

Here is the full boot log:

Starting kernel ...

uboot time: 7439735 us
        7f800000 - 80000000,     8192 KB, linux,meson-fb
        e5800000 - ed800000,   131072 KB, linux,ion-dev
        e3000000 - e5800000,    40960 KB, linux,di_cma
        e3000000 - e3000000,        0 KB, linux,ppmgr
        cfc00000 - e3000000,   315392 KB, linux,codec_mm_cma
        cfc00000 - cfc00000,        0 KB, linux,codec_mm_reserved
        05000000 - 05400000,     4096 KB, linux,secmon
codec_mm_module_init
clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
meson-pwm ffd1b000.pwm: pwm pinmux : can't get pinctrl
meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
ff803000.serial: clock gate not found
meson-remote ff808040.rc: don't find the node <led_blink>
meson-remote ff808040.rc: don't find the node <led_blink_frq>
meson-fb meson-fb: create ion_client ffffffc09eca1a80, handle=ffffffc09ec9c740
meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
di_get_vpu_clkb: get clk vpu error.
meson-mmc: >>>>>>>>hostbase ffffff800852b000, dmode 
meson-mmc: >>>>>>>>hostbase ffffff8008534000, dmode 
dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
meson-mmc: emmc: warning... data crc, vstat:0xa10f200f, virqc:3fffmeson-mmc: @ cmd 8 arg 0 with ffffffc09ee3bb10; stop 0, status 4
meson-mmc: emmc: err: wait for irq service, bus_fsm:0x8
meson-mmc: meson_mmc_irq_thread_v3() 653: set 1st retry!
meson-mmc: retry cmd 8 the 3-th time(s)
dwc_otg: Core Release: 3.30a
dwc_otg: Setting default values for core params
dwc_otg: curmode: 0, host_only: 0
dwc_otg: Using Buffer DMA mode
dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
dwc_otg: Working on port type = SLAVE
dwc_otg: Dedicated Tx FIFOs mode
pm-meson aml_pm: Can't get switch_clk81
meson-mmc: card IN

/ # wake-on-lan = 00000000
wake-on-lan = 00000000
mount: mounting LABEL=BATOCERA on /boot_root failed: No such file or directory
Waiting for the root device LABEL=BATOCERA
Mounted LABEL=BATOCERA as /boot_root
INIT: version 3.04 booting
INIT: No inittab.d directory found
Tue Jan  1 01:00:00 CET 1980
Starting system message bus: Could not create /var/lib/dbus/machine-id.iBxOxEh1: No such file or directory
dbus[185]: Unknown username "pulse" in message bus configuration file
done
Starting syslog-ng: OK
/etc/init.d/S02overclock: line 21: warning: command substitution: ignored null byte in input
Running sysctl: OK
Restoring random seed: done.
Saving random seed: done.
Populating /dev using udev: done
alsa-lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
Found hardware: "axg-sound-card" "" "" "" ""
Hardware is initialized using a generic method
Starting pipewire: Connection failure: Connection refused
pa_context_connect() failed: Connection refused
OK
modprobe: FATAL: Module snd_seq not found in directory /lib/modules/6.6.56
Starting network: OK
Starting connman: done.
Starting share: No devices found
done.
done.
Creating /userdata/system/configs/emulationstation/es_settings.cfg
cp: cannot stat '/usr/share/batocera/datainit/system/configs/emulationstation/es_settings.cfg': No such file or directory
cat: /sys/devices/system/cpu/cpufreq/policy0/scaling_available_governors: Device or resource busy
cat: /sys/devices/system/cpu/cpufreq/policy0/scaling_available_governors: Device or resource busy
cat: /sys/devices/system/cpu/cpufreq/policy0/scaling_governor: Device or resource busy
Starting lircd: OK
Starting system: dos2unix: converting file /userdata/system/batocera.conf to Unix format...
done.
OK
Starting splash-mpv: Video: /usr/share/batocera/splash/splash.mp4: OK
Bluetooth adapter name has been set to: Hardkernel_ODROID_N2Plus
Starting rpcbind: OK
start-stop-daemon: warning: failed to kill 1475: No such process
Starting rngd: OK
Starting iptables: Can't open /etc/iptables.conf: No such file or directory
FAIL
Starting securepasswd: done.
Starting fake hwclock: loading system time.
Current system time: 2026-04-16 16:48:42
fake-hwclock saved clock information is in the past: 2026-04-16 16:47:27
To set system time to this saved clock anyway, use "force"
Starting ntpd: OK
Starting dropbear sshd: OK
Starting thd: OK
Starting NFS statd: OK
Starting NFS services: OK
Starting NFS daemon: OK
Starting NFS mountd: OK
Starting batocera-battery-checker: OK
Starting hotkeygen: OK
Starting SMB services: done
Starting NMB services: done
Starting wsdd: wsdd
done
Starting joycond...
modprobe: FATAL: Module ledtrig-timer not found in directory /lib/modules/6.6.56
joycond started.
find: '/userdata/system/services': No such file or directory
System Service: dmd_real -> service is disabled [ok]
System Service: dmd_simulator -> service is disabled [ok]
System Service: es_web_notifier -> service is disabled [ok]
INIT: Entering runlevel: 3

READY TO RETRO


      ____    __   ____  _____  ___  ____  ____    __   
     (  _ \  /__\ (_  _)(  _  )/ __)( ___)(  _ \  /__\  
      ) _ < /(__)\  )(   )(_)(( (__  )__)  )   / /(__)\ 
     (____/(__)(__)(__) (_____)\___)(____)(_)\_)(__)(__)
                 R E A D Y   T O   R E T R O


-- type 'batocera-check-updates' to check for stable branch --
-- add 'butterfly' switch to check for latest arch developments  --

Model: Hardkernel_ODROID_N2Plus
System: Linux 6.6.56
Architecture: aarch64
Board: odroidn2plus
CPU Model: ARMv8 Processor rev 2 (v8l)
CPU Cores:  / CPU Threads: 6
CPU Max Frequency: 2208 MHz
Temperature: 37°C
Available Memory: 3178/3603 MB
Display Server: wayland
Display Compositor: labwc
Display Output: HDMI-A-1
Display Resolution: 3840x2160
Display Refresh Rate: 60.000Hz
Data Partition Format: ext4
Data Partition Available Space: 49G
Network IP Address: 192.168.20.176
OS version: 43-dev-eddc36c5b2 2026/02/05 06:22