How to print EAN13 in SAP

[conworld]

Hi Terry, BWIPP is wonderful, many thanks for your effort. I performed your demo and printed qrcode.
Now, I want to print EAN 13 but output is blank. I don't know that how to use correct print control.
Could you help me? I do as follow:

1. Upload device type ZBWIPP_M
   
2. Create program
   
3. Run and Output is blank
   

[terryburton]

Hi. I did not write the SAP integration but I have pinged the person who did to ensure that they are aware of your question.

[conworld]

Ok, thanks very much.

[rjruss]

Hi,
I created the SAP device types based on BWIPP and from the info you provide it is a bit difficult to determine the exact issue.
The ZBWIPP_M device type in the screenshots require SAP config settings as per this link https://www.rjruss.info/2011/10/printing-barcodes-for-free-with-sap.html
If you have the required settings as per the link , click on my github profile and send me an email and we can check in more detail.
Cheers
Robert

[conworld]

Hi Robert,
Appreciate your reply. I have already read this link and have finished all steps before printing. but I will check again. Then feedback
you. Many thanks!
Regards,
Dou

[conworld]

Thanks Terry and Robert very much, all issues are resolved. The following is all steps to print EAN13 in SAP.

1. Install BWIPP in SAP application server with reference the link https://www.rjruss.info/2011/10/printing-barcodes-for-free-with-sap.html
2. Define customer paper ZMM003. Then copy actions from POSTSCPT:DINA4. Importantly, change printer init. action
   
3. If want to resize barcode, for example 70% height, add print control ZOP08
   
4. Print program
   
5. Output
   

[terryburton]

Thanks Terry and Robert very much, all issues are resolved. The following is all steps to print EAN13 in SAP.
<...snip...>

Thanks for the confirmation.