Update - settings report strings

Author: classicrocker883

Marlin/src/core/language.h

@@ -281,19 +281,19 @@
 
 // Settings Report Strings
 #define STR_Z_AUTO_ALIGN                    "Z Auto-Align"
-#define STR_BACKLASH_COMPENSATION           "Backlash compensation"
+#define STR_BACKLASH_COMPENSATION           "Backlash Compensation"
 #define STR_FT_MOTION                       "Fixed-Time Motion"
 #define STR_S_SEG_PER_SEC                   "S<seg-per-sec>"
 #define STR_DELTA_SETTINGS                  "Delta (L<diagonal-rod> R<radius> H<height> S<seg-per-sec> XYZ<tower-angle-trim> ABC<rod-trim>)"
 #define STR_SCARA_SETTINGS                  "SCARA"
 #define STR_POLAR_SETTINGS                  "Polar"
 #define STR_POLARGRAPH_SETTINGS             "Polargraph"
 #define STR_SCARA_P_T_Z                     "P<theta-psi-offset> T<theta-offset> Z<home-offset>"
-#define STR_ENDSTOP_ADJUSTMENT              "Endstop adjustment"
+#define STR_ENDSTOP_ADJUSTMENT              "Endstop Adjustment"
 #define STR_SKEW_FACTOR                     "Skew Factor"
 #define STR_VOLUMETRIC_EXTRUSION            "Volumetric Extrusion"
 #define STR_MAX_ACCELERATION                "Max Acceleration (units/s2)"
-#define STR_MAX_FEEDRATES                   "Max feedrates (units/s)"
+#define STR_MAX_FEEDRATES                   "Max Feedrates (units/s)"
 #define STR_ACCELERATION_P_R_T              "Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>)"
 #define STR_HOMING_FEEDRATE                 "Homing Feedrate"
 #define STR_TOOL_CHANGING                   "Tool-changing"
@@ -307,39 +307,39 @@
 #define STR_HOTEND_PID                      "Hotend PID"
 #define STR_BED_PID                         "Bed PID"
 #define STR_CHAMBER_PID                     "Chamber PID"
-#define STR_STEPS_PER_UNIT                  "Steps per unit"
+#define STR_STEPS_PER_UNIT                  "Steps per Unit"
 #define STR_LINEAR_ADVANCE                  "Linear Advance"
 #define STR_NONLINEAR_EXTRUSION             "Nonlinear Extrusion"
 #define STR_INPUT_SHAPING                   "Input Shaping"
 #define STR_HOTEND_TIMEOUT                  "Hotend Idle Timeout"
 #define STR_CONTROLLER_FAN                  "Controller Fan"
-#define STR_STEPPER_MOTOR_CURRENTS          "Stepper motor currents"
+#define STR_STEPPER_MOTOR_CURRENTS          "Stepper Motor Currents"
 #define STR_RETRACT_S_F_Z                   "Retract (S<length> F<feedrate> Z<lift>)"
 #define STR_RECOVER_S_F                     "Recover (S<length> F<feedrate>)"
 #define STR_AUTO_RETRACT_S                  "Auto-Retract (S<enable>)"
-#define STR_FILAMENT_LOAD_UNLOAD            "Filament load/unload"
+#define STR_FILAMENT_LOAD_UNLOAD            "Filament Load/Unload"
 #define STR_POWER_LOSS_RECOVERY             "Power-Loss Recovery"
-#define STR_FILAMENT_RUNOUT_SENSOR          "Filament runout sensor"
-#define STR_DRIVER_STEPPING_MODE            "Driver stepping mode"
-#define STR_STEPPER_DRIVER_CURRENT          "Stepper driver current"
+#define STR_FILAMENT_RUNOUT_SENSOR          "Filament Runout Sensor"
+#define STR_DRIVER_STEPPING_MODE            "Driver Stepping Mode"
+#define STR_STEPPER_DRIVER_CURRENT          "Stepper Driver Current"
 #define STR_HOMING_CURRENT                  "Homing Current (mA)"
 #define STR_TMC_STEALTH                     "StealthChop"
 #define STR_HYBRID_THRESHOLD                "Hybrid Threshold"
 #define STR_STALLGUARD_THRESHOLD            "StallGuard Threshold"
 #define STR_HOME_OFFSET                     "Home Offset"
-#define STR_SOFT_ENDSTOPS                   "Soft endstops"
-#define STR_MATERIAL_HEATUP                 "Material heatup parameters"
+#define STR_SOFT_ENDSTOPS                   "Soft Endstops"
+#define STR_MATERIAL_HEATUP                 "Material Heatup Parameters"
 #define STR_LCD_CONTRAST                    "LCD Contrast"
 #define STR_LCD_BRIGHTNESS                  "LCD Brightness"
 #define STR_DISPLAY_SLEEP                   "Display Sleep"
 #define STR_UI_LANGUAGE                     "UI Language"
 #define STR_PROBE_OFFSET                    "Probe Offset"
 #define STR_TEMPERATURE_UNITS               "Temperature Units"
-#define STR_USER_THERMISTORS                "User thermistors"
-#define STR_DELAYED_POWEROFF                "Delayed poweroff"
+#define STR_USER_THERMISTORS                "User Thermistors"
+#define STR_DELAYED_POWEROFF                "Delayed Poweroff"
 #define STR_MPC                             "Model Predictive Control"
 #define STR_MM3_STATS                       "MMU3 Operational Stats"
-#define STR_STORED_MACROS                   "Stored macros"
+#define STR_STORED_MACROS                   "Stored Macros"
 
 //
 // General axis names

Marlin/src/module/settings.cpp

@@ -4091,12 +4091,12 @@ void MarlinSettings::reset() {
     gcode.say_units(); // " (in/mm)"
 
     //
-    // M104 settings for AUTOTEMP
+    // M104 Auto Temp Control
     //
     TERN_(AUTOTEMP, gcode.M104_report());
 
     //
-    // M149 Temperature units
+    // M149 Temperature Units
     //
     #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
       gcode.M149_report(forReplay);
@@ -4116,7 +4116,7 @@ void MarlinSettings::reset() {
     TERN_(EDITABLE_STEPS_PER_UNIT, gcode.M92_report(forReplay));
 
     //
-    // M203 Maximum feedrates (units/s)
+    // M203 Maximum Feedrates (units/s)
     //
     gcode.M203_report(forReplay);
 
@@ -4223,7 +4223,7 @@ void MarlinSettings::reset() {
     TERN_(IS_KINEMATIC, gcode.M665_report(forReplay));
 
     //
-    // M666 Endstop adjustment
+    // M666 Endstop Adjustment
     //
     #if ANY(DELTA, HAS_EXTRA_ENDSTOPS)
       gcode.M666_report(forReplay);
@@ -4235,7 +4235,7 @@ void MarlinSettings::reset() {
     TERN_(Z_STEPPER_AUTO_ALIGN, gcode.M422_report(forReplay));
 
     //
-    // M145 Material heatup parameters
+    // M145 Material Heatup Parameters
     //
     TERN_(HAS_PREHEAT, gcode.M145_report(forReplay));
 
@@ -4249,7 +4249,7 @@ void MarlinSettings::reset() {
     TERN_(PIDTEMPCHAMBER, gcode.M309_report(forReplay));
 
     //
-    // M305 User thermistors
+    // M305 User Thermistors
     //
     #if HAS_USER_THERMISTORS
       for (uint8_t i = 0; i < USER_THERMISTORS; ++i)
@@ -4293,7 +4293,7 @@ void MarlinSettings::reset() {
     #endif
 
     //
-    // Homing Feedrate
+    // M210 Homing Feedrate
     //
     TERN_(EDITABLE_HOMING_FEEDRATE, gcode.M210_report(forReplay));
 
@@ -4335,7 +4335,7 @@ void MarlinSettings::reset() {
     TERN_(EDITABLE_HOMING_CURRENT, gcode.M920_report(forReplay));
 
     //
-    // M569 TMC Driver stepping mode
+    // M569 TMC Driver Stepping Mode
     //
     TERN_(HAS_STEALTHCHOP, gcode.M569_report(forReplay));
 
@@ -4365,14 +4365,14 @@ void MarlinSettings::reset() {
     TERN_(HAS_LIN_ADVANCE_K, gcode.M900_report(forReplay));
 
     //
-    // M907 Stepper motor currents
+    // M907 Stepper Motor Currents
     //
     #if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
       gcode.M907_report(forReplay);
     #endif
 
     //
-    // M603 Filament load/unload
+    // M603 Filament Load/Unload
     //
     TERN_(CONFIGURE_FILAMENT_CHANGE, gcode.M603_report(forReplay));
 
@@ -4387,7 +4387,7 @@ void MarlinSettings::reset() {
     TERN_(BACKLASH_GCODE, gcode.M425_report(forReplay));
 
     //
-    // M412 Filament runout sensor
+    // M412 Filament Runout Sensor
     //
     TERN_(HAS_FILAMENT_SENSOR, gcode.M412_report(forReplay));