PiM25dev_2018/My_PiM25_Boxm.py at master · davidmikolas/PiM25dev_2018 · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
#!/usr/bin/env python
# -*- coding: utf-8 -*-

# SUGGESTED CONNECTIONS, but you can of course do it differenlty!
##############################################################
#           Raspberry Pi 3 GPIO Pinout;           Corner --> #
#                    (pin 1)  | (pin 2)                      #
#  OLED/GPS Vcc       +3.3V   |  +5.0V    Gas sensor GND     #
#  OLED SDA          GPIO  2  |  +5.0V    PM25 G3 pin 1 Vcc b#
#  OLED SCL          GPIO  3  |  GND      PM25 G3 pin 2 GND o#
#                    GPIO  4  | UART TX                      #
#  OLED/Gas GND       GND     | UART RX                      #                    GPIO 17  | GPIO 18   PM25 G3 pin 5 TX  g#
#                    GPIO 17  | GPIO 18   PM25 G3 pin 5 TX  g#
#                    GPIO 27  |  GND                         #
#                    GPIO 22  | GPIO 23                      #
#r MCP3008 Vcc/Vref   +3.3V   | GPIO 24                      #
#                    GPIO 10  |  GND      DHT22 GND         g#
#                    GPIO  9  | GPIO 25   DHT22 DATA        b#                      #
#                    GPIO 11  | GPIO  8   DHT22 POWER       p#
#                     GND     | GPIO  7                      #
#                    Reserved | Reserved                     #
#                    GPIO  5  |  GND                         #
#b MCP3008 CLK       GPIO  6  | GPIO 12                      #
#g MCP3008 MISO      GPIO 13  |  GND      (GPS GND)          #
#y MCP3008 MOSI      GPIO 19  | GPIO 16   (GPS TX)           #
#o MCP3008 CSbar     GPIO 26  | GPIO 20                      #
#brMCP3008 GND/GND    GND     | GPIO 21                      #
#                   (pin 39)  | (pin 40)                     #
##############################################################

from PiM25_v005m import BOX
import time

# make a box
box = BOX('my box', use_WiFi=True,
          use_SMBus=True, use_pigpio=True)

dht   = box.new_DHT22bb('my dht', DATA=25, POWER=8)
g3    = box.new_G3bb('my g3', DATA=18, collect_time = 3.0)
oled  = box.new_OLEDi2c('my oled')
adc   = box.new_MCP3008bb('my adc', MISO=13, MOSI=19,
                          CSbar=26, SCLK=6, Vref=3.3)
CO2   = box.new_MOS_gas_sensor('my CO2', ADC=adc, channel=1,
                               Rseries=1000,
                               Calibrationdata=[[100, 10000], [1000, 1000], [10000, 100]],
                               use_loglog=False, gasname='CO2',
                               atlimitsisokay=True)
CO    = box.new_MOS_gas_sensor('my CO', ADC=adc, channel=2,
                               Rseries=2000,
                               Calibrationdata=[[100, 10000], [1000, 1000], [10000, 100]],
                               use_loglog=False, gasname='CO',
                               atlimitsisokay=True)

mylogconfig = {dht:['temperature', 'humidity'],
               g3:['PM25', 'PM1', 'PM10'],
               CO2:['ppm'], CO:['ppm']}

mylog = box.new_LOG('mylog.txt', 'mylog')
mylog.configure(mylogconfig)

lass = box.new_LASS('mylass')
lass.set_static_location(latlon=(25.033661, 121.564841), alt=550.)  # TPE101

lass.set_sources(humsrc=dht, tempsrc=dht,
                 pm25src=g3, pm1src=g3, pm10src=g3,
                 timedatesrc='system', GPSsrc='static')
gpsstatic = {'latitude': lass.static_lat,
             'longitude':lass.static_lon,
             'altitude': lass.static_alt }
# gps = new_GPSbb('my gps', DATA=16)  # for indoors use static GPS info
gps      = box.new_Dummy('my gps', gpsstatic)
timedate = box.new_Dummy('sys timedate')

readables = [d for d in box.devices if hasattr(d, 'read')]

for d in readables:
    d.read()
    print d, 'read is good: ', d.last_read_is_good

if True:
    oled.YAMLsetup('oledyamlm.yaml')

oled.initiate()
oled.display_on()
for thing in ('show_white', 'show_black', 'show_gray'):
    getattr(oled, thing)()

while True:
    print "loop!"
    oled.show_image('TPE101small.png', resize_method='fit',
                    conversion_method='threshold', threshold=60)
    for d in readables:
        d.read()
    systimedic = box.get_system_timedate_dict()
    timedate.datadict.update(systimedic)


    mylog.build_and_save_entry(sysinfo_interval=10)

    lass.build_entry()

    print lass.LASS_string

    for cycle in range(2):
        for s in oled.screens:
            s.update()
            oled.show_screen(s)
            time.sleep(1)