valkey.conf

# Valkey configuration file example.
#
# Note that in order to read the configuration file, the server must be
# started with the file path as first argument:
#
# ./valkey-server /path/to/valkey.conf

# Note on units: when memory size is needed, it is possible to specify
# it in the usual form of 1k 5GB 4M and so forth:
#
# 1k => 1000 bytes
# 1kb => 1024 bytes
# 1m => 1000000 bytes
# 1mb => 1024*1024 bytes
# 1g => 1000000000 bytes
# 1gb => 1024*1024*1024 bytes
#
# units are case insensitive so 1GB 1Gb 1gB are all the same.

################################## INCLUDES ###################################

# Include one or more other config files here.  This is useful if you
# have a standard template that goes to all servers but also need
# to customize a few per-server settings.  Include files can include
# other files, so use this wisely.
#
# Note that option "include" won't be rewritten by command "CONFIG REWRITE"
# from admin or Sentinel. Since the server always uses the last processed
# line as value of a configuration directive, you'd better put includes
# at the beginning of this file to avoid overwriting config change at runtime.
#
# If instead you are interested in using includes to override configuration
# options, it is better to use include as the last line.
#
# Included paths may contain wildcards. All files matching the wildcards will
# be included in alphabetical order.
# Note that if an include path contains a wildcards but no files match it when
# the server is started, the include statement will be ignored and no error will
# be emitted.  It is safe, therefore, to include wildcard files from empty
# directories.
#
# include /path/to/local.conf
# include /path/to/other.conf
# include /path/to/fragments/*.conf
#

################################## MODULES #####################################

# Load modules at startup. If the server is not able to load modules
# it will abort. It is possible to use multiple loadmodule directives.
#
# loadmodule /path/to/my_module.so
# loadmodule /path/to/other_module.so
# loadmodule /path/to/args_module.so [arg [arg ...]]

################################## NETWORK #####################################

# By default, if no "bind" configuration directive is specified, the server listens
# for connections from all available network interfaces on the host machine.
# It is possible to listen to just one or multiple selected interfaces using
# the "bind" configuration directive, followed by one or more IP addresses.
# Each address can be prefixed by "-", which means that the server will not fail to
# start if the address is not available. Being not available only refers to
# addresses that does not correspond to any network interface. Addresses that
# are already in use will always fail, and unsupported protocols will always be
# silently skipped.
#
# Examples:
#
# bind 192.168.1.100 10.0.0.1     # listens on two specific IPv4 addresses
# bind 127.0.0.1 ::1              # listens on loopback IPv4 and IPv6
# bind * -::*                     # like the default, all available interfaces
#
# ~~~ WARNING ~~~ If the computer running the server is directly exposed to the
# internet, binding to all the interfaces is dangerous and will expose the
# instance to everybody on the internet. So by default we uncomment the
# following bind directive, that will force the server to listen only on the
# IPv4 and IPv6 (if available) loopback interface addresses (this means the server
# will only be able to accept client connections from the same host that it is
# running on).
#
# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
# COMMENT OUT THE FOLLOWING LINE.
#
# You will also need to set a password unless you explicitly disable protected
# mode.
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
bind 127.0.0.1 -::1

# By default, outgoing connections (from replica to primary, from Sentinel to
# instances, cluster bus, etc.) are not bound to a specific local address. In
# most cases, this means the operating system will handle that based on routing
# and the interface through which the connection goes out.
#
# Using bind-source-addr it is possible to configure a specific address to bind
# to, which may also affect how the connection gets routed.
#
# Example:
#
# bind-source-addr 10.0.0.1

# Protected mode is a layer of security protection, in order to avoid that
# the server instances left open on the internet are accessed and exploited.
#
# When protected mode is on and the default user has no password, the server
# only accepts local connections from the IPv4 address (127.0.0.1), IPv6 address
# (::1) or Unix domain sockets.
#
# By default protected mode is enabled. You should disable it only if
# you are sure you want clients from other hosts to connect to the server
# even if no authentication is configured.
protected-mode yes

# The server uses default hardened security configuration directives to reduce the
# attack surface on innocent users. Therefore, several sensitive configuration
# directives are immutable, and some potentially-dangerous commands are blocked.
#
# Configuration directives that control files that the server writes to (e.g., 'dir'
# and 'dbfilename') and that aren't usually modified during runtime
# are protected by making them immutable.
#
# Commands that can increase the attack surface of the server and that aren't usually
# called by users are blocked by default.
#
# These can be exposed to either all connections or just local ones by setting
# each of the configs listed below to either of these values:
#
# no    - Block for any connection (remain immutable)
# yes   - Allow for any connection (no protection)
# local - Allow only for local connections. Ones originating from the
#         IPv4 address (127.0.0.1), IPv6 address (::1) or Unix domain sockets.
#
# enable-protected-configs no
# enable-debug-command no
# enable-module-command no

# Accept connections on the specified port, default is 6379 (IANA #815344).
# If port 0 is specified the server will not listen on a TCP socket.
port 6379

# TCP listen() backlog.
#
# In high requests-per-second environments you need a high backlog in order
# to avoid slow clients connection issues. Note that the Linux kernel
# will silently truncate it to the value of /proc/sys/net/core/somaxconn so
# make sure to raise both the value of somaxconn and tcp_max_syn_backlog
# in order to get the desired effect.
tcp-backlog 511

# Multipath TCP (MPTCP)
#
# MPTCP splits a single TCP connection into subflows over multiple interfaces or paths.
# It enables bandwidth aggregation, failover, and improved reliability.
# When set to 'yes', clients will be able to use MPTCP if requested. When not
# requested, regular TCP can be used like before.
# Note: MPTCP is supported in the mainline Linux kernel starting from version 5.6.
#
# mptcp yes

# Unix socket.
#
# Specify the path for the Unix socket that will be used to listen for
# incoming connections. There is no default, so the server will not listen
# on a unix socket when not specified.
#
# unixsocket /run/valkey.sock
# unixsocketgroup wheel
# unixsocketperm 700

# Close the connection after a client is idle for N seconds (0 to disable)
timeout 0

# TCP keepalive.
#
# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence
# of communication. This is useful for two reasons:
#
# 1) Detect dead peers.
# 2) Force network equipment in the middle to consider the connection to be
#    alive.
#
# On Linux, the specified value (in seconds) is the period used to send ACKs.
# Note that to close the connection the double of the time is needed.
# On other kernels the period depends on the kernel configuration.
tcp-keepalive 300

# Apply OS-specific mechanism to mark the listening socket with the specified
# ID, to support advanced routing and filtering capabilities.
#
# On Linux, the ID represents a connection mark.
# On FreeBSD, the ID represents a socket cookie ID.
# On OpenBSD, the ID represents a route table ID.
#
# The default value is 0, which implies no marking is required.
# socket-mark-id 0

################################# TLS/SSL #####################################

# By default, TLS/SSL is disabled. To enable it, the "tls-port" configuration
# directive can be used to define TLS-listening ports. To enable TLS on the
# default port, use:
#
# port 0
# tls-port 6379

# Configure a X.509 certificate and private key to use for authenticating the
# server to connected clients, primaries or cluster peers.  These files should be
# PEM formatted.
#
# tls-cert-file valkey.crt
# tls-key-file valkey.key
#
# If the key file is encrypted using a passphrase, it can be included here
# as well.
#
# tls-key-file-pass secret

# Normally the server uses the same certificate for both server functions (accepting
# connections) and client functions (replicating from a primary, establishing
# cluster bus connections, etc.).
#
# Sometimes certificates are issued with attributes that designate them as
# client-only or server-only certificates. In that case it may be desired to use
# different certificates for incoming (server) and outgoing (client)
# connections. To do that, use the following directives:
#
# tls-client-cert-file client.crt
# tls-client-key-file client.key
#
# If the key file is encrypted using a passphrase, it can be included here
# as well.
#
# tls-client-key-file-pass secret

# Configure a DH parameters file to enable Diffie-Hellman (DH) key exchange,
# required by older versions of OpenSSL (<3.0). Newer versions do not require
# this configuration and recommend against it.
#
# tls-dh-params-file valkey.dh

# Configure a CA certificate(s) bundle or directory to authenticate TLS/SSL
# clients and peers. The server requires an explicit configuration of at least one
# of these, and will not implicitly use the system wide configuration.
#
# tls-ca-cert-file ca.crt
# tls-ca-cert-dir /etc/ssl/certs

# By default, clients (including replica servers) on a TLS port are required
# to authenticate using valid client side certificates.
#
# If "no" is specified, client certificates are not required and not accepted.
# If "optional" is specified, client certificates are accepted and must be
# valid if provided, but are not required.
#
# tls-auth-clients no
# tls-auth-clients optional

# Automatically authenticate TLS clients as Valkey users based on their
# certificate fields. When enabled, the server extracts a value from the
# client's TLS certificate and looks up a matching Valkey user. If found,
# the client is authenticated as that user during the TLS handshake. If no
# match is found, the client remains unauthenticated as the default user.
#
# When using this feature, it is recommended to configure users without
# passwords so that authentication is enforced exclusively through client
# certificates, such as `ACL SETUSER URI-user on allcommands allkeys`.
#
# Options:
#   CN  - Use the Common Name from the certificate's Subject field.
#   URI - Use the URI from the certificate's Subject Alternative Name (SAN).
#         If multiple URI entries exist, the first one matching an enabled
#         Valkey user is used.
#   off - Disable certificate-based user authentication (default).
#
# Example:
#   tls-auth-clients-user URI

# By default, a replica does not attempt to establish a TLS connection
# with its primary.
#
# Use the following directive to enable TLS on replication links.
#
# tls-replication yes

# By default, the cluster bus uses a plain TCP connection. To enable
# TLS for the bus protocol, use the following directive:
#
# tls-cluster yes

# By default, only TLSv1.2 and TLSv1.3 are enabled and it is highly recommended
# that older formally deprecated versions are kept disabled to reduce the attack surface.
# You can explicitly specify TLS versions to support.
# Allowed values are case insensitive and include "TLSv1", "TLSv1.1", "TLSv1.2",
# "TLSv1.3" (OpenSSL >= 1.1.1) or any combination.
# To enable only TLSv1.2 and TLSv1.3, use:
#
# tls-protocols "TLSv1.2 TLSv1.3"

# Configure allowed ciphers.  See the ciphers(1ssl) manpage for more information
# about the syntax of this string.
#
# Note: this configuration applies only to <= TLSv1.2.
#
# tls-ciphers DEFAULT:!MEDIUM

# Configure allowed TLSv1.3 ciphersuites.  See the ciphers(1ssl) manpage for more
# information about the syntax of this string, and specifically for TLSv1.3
# ciphersuites.
#
# tls-ciphersuites TLS_CHACHA20_POLY1305_SHA256

# When choosing a cipher, use the server's preference instead of the client
# preference. By default, the server follows the client's preference.
#
# tls-prefer-server-ciphers yes

# By default, TLS session caching is enabled to allow faster and less expensive
# reconnections by clients that support it. Use the following directive to disable
# caching.
#
# tls-session-caching no

# Change the default number of TLS sessions cached. A zero value sets the cache
# to unlimited size. The default size is 20480.
#
# tls-session-cache-size 5000

# Change the default timeout of cached TLS sessions. The default timeout is 300
# seconds.
#
# tls-session-cache-timeout 60

# Interval of TLS material reloading in seconds.
# The default value is 0 (disabled, no automatic reload).
# When set to a value greater than 0, the server will periodically check the
# certificate and key files and, if modified, reload the TLS materials. The
# reload work is performed in a background thread, so it does not block the main
# thread.
#
# For example, to reload TLS materials daily:
# tls-auto-reload-interval 86400

################################### RDMA ######################################

# Valkey Over RDMA is experimental, it may be changed or be removed in any minor or major version.
# By default, RDMA is disabled. To enable it, the "rdma-port" configuration
# directive can be used to define RDMA-listening ports.
#
# rdma-port 6379
# rdma-bind 192.168.1.100

# The RDMA receive transfer buffer is 1M by default. It can be set between 64K and 16M.
# Note that page size aligned size is preferred.
#
# rdma-rx-size 1048576

# The RDMA completion queue will use the completion vector to signal completion events
# via hardware interrupts. A large number of hardware interrupts can affect CPU performance.
# It is possible to tune the performance using rdma-completion-vector.
#
# Example 1. a) Pin hardware interrupt vectors [0, 3] to CPU [0, 3].
#            b) Set CPU affinity for valkey to CPU [4, X].
#            c) Any valkey server uses a random RDMA completion vector [-1].
# All valkey servers will not affect each other and will be isolated from kernel interrupts.
#
#   SYS    SYS    SYS    SYS  VALKEY VALKEY     VALKEY
#    |      |      |      |      |      |          |
#  CPU0   CPU1   CPU2   CPU3   CPU4   CPU5   ... CPUX
#    |      |      |      |
#  INTR0  INTR1  INTR2  INTR3
#
# Example 2. a) 1:1 pin hardware interrupt vectors [0, X] to CPU [0, X].
#            b) Set CPU affinity for valkey [M] to CPU [M].
#            c) Valkey server [M] uses RDMA completion vector [M].
# A single CPU [M] handles hardware interrupts, the RDMA completion vector [M],
# and the valkey server [M] within its context only.
# This avoids overhead and function calls across multiple CPUs, fully isolating
# each valkey server from one another.
#
# VALKEY VALKEY VALKEY VALKEY VALKEY VALKEY     VALKEY
#    |      |      |      |      |      |          |
#  CPU0   CPU1   CPU2   CPU3   CPU4   CPU5  ...  CPUX
#    |      |      |      |      |      |          |
#  INTR0  INTR1  INTR2  INTR3  INTR4  INTR5      INTRX
#
# Use 0 and positive numbers to specify the RDMA completion vector, or specify -1 to allow
# the server to use a random vector for a new connection. The default vector is -1.
#
# rdma-completion-vector 0

################################# GENERAL #####################################

# By default the server does not run as a daemon. Use 'yes' if you need it.
# Note that the server will write a pid file in /var/run/valkey.pid when daemonized.
# When the server is supervised by upstart or systemd, this parameter has no impact.
daemonize no

# If you run the server from upstart or systemd, the server can interact with your
# supervision tree. Options:
#   supervised no      - no supervision interaction
#   supervised upstart - signal upstart by putting the server into SIGSTOP mode
#                        requires "expect stop" in your upstart job config
#   supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET
#                        on startup, and updating the server status on a regular
#                        basis.
#   supervised auto    - detect upstart or systemd method based on
#                        UPSTART_JOB or NOTIFY_SOCKET environment variables
# Note: these supervision methods only signal "process is ready."
#       They do not enable continuous pings back to your supervisor.
#
# The default is "no". To run under upstart/systemd, you can simply uncomment
# the line below:
#
# supervised auto

# If a pid file is specified, the server writes it where specified at startup
# and removes it at exit.
#
# When the server runs non daemonized, no pid file is created if none is
# specified in the configuration. When the server is daemonized, the pid file
# is used even if not specified, defaulting to "/var/run/valkey.pid".
#
# Creating a pid file is best effort: if the server is not able to create it
# nothing bad happens, the server will start and run normally.
#
# Note that on modern Linux systems "/run/valkey.pid" is more conforming
# and should be used instead.
pidfile /var/run/valkey_6379.pid

# Specify the server verbosity level.
# This can be one of:
# debug (a lot of information, useful for development/testing)
# verbose (many rarely useful info, but not a mess like the debug level)
# notice (moderately verbose, what you want in production probably)
# warning (only very important / critical messages are logged)
# nothing (nothing is logged)
loglevel notice

# Specify the logging format.
# This can be one of:
#
# - legacy: the default, traditional log format
# - logfmt: a structured log format; see https://www.brandur.org/logfmt
# - json: a structured log format
#
# log-format legacy

# Specify the timestamp format used in logs using 'log-timestamp-format'.
#
# - legacy: default format
# - iso8601: ISO 8601 extended date and time with time zone, on the form
#   yyyy-mm-ddThh:mm:ss.sss±hh:mm
# - milliseconds: milliseconds since the epoch
#
# log-timestamp-format legacy

# Specify the log file name. Also the empty string can be used to force
# the server to log on the standard output. Note that if you use standard
# output for logging but daemonize, logs will be sent to /dev/null
logfile ""

# To enable logging to the system logger, just set 'syslog-enabled' to yes,
# and optionally update the other syslog parameters to suit your needs.
# syslog-enabled no

# Specify the syslog identity.
# syslog-ident valkey

# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7.
# syslog-facility local0

# To disable the built in crash log, which will possibly produce cleaner core
# dumps when they are needed, uncomment the following:
#
# crash-log-enabled no

# To disable the fast memory check that's run as part of the crash log, which
# will possibly let the server terminate sooner, uncomment the following:
#
# crash-memcheck-enabled no

# Set the number of databases. The default database is DB 0, you can select
# a different one on a per-connection basis using SELECT <dbid> where
# dbid is a number between 0 and 'databases'-1
# Note: This setting is ignored in cluster mode. Use `cluster-databases` instead.
databases 16

# By default the server shows an ASCII art logo only when started to log to the
# standard output and if the standard output is a TTY and syslog logging is
# disabled. Basically this means that normally a logo is displayed only in
# interactive sessions.
#
# However it is possible to force the pre-4.0 behavior and always show a
# ASCII art logo in startup logs by setting the following option to yes.
always-show-logo no

# User data, including keys, values, client names, and ACL usernames, can be
# logged as part of assertions and other error cases. To prevent sensitive user
# information, such as PII, from being recorded in the server log file, this
# user data is hidden from the log by default. If you need to log user data for
# debugging or troubleshooting purposes, you can disable this feature by
# changing the config value to no.
hide-user-data-from-log yes

# By default, the server modifies the process title (as seen in 'top' and 'ps') to
# provide some runtime information. It is possible to disable this and leave
# the process name as executed by setting the following to no.
set-proc-title yes

# When changing the process title, the server uses the following template to construct
# the modified title.
#
# Template variables are specified in curly brackets. The following variables are
# supported:
#
# {title}           Name of process as executed if parent, or type of child process.
# {listen-addr}     Bind address or '*' followed by TCP or TLS port listening on, or
#                   Unix socket if only that's available.
# {server-mode}     Special mode, i.e. "[sentinel]" or "[cluster]".
# {port}            TCP port listening on, or 0.
# {tls-port}        TLS port listening on, or 0.
# {unixsocket}      Unix domain socket listening on, or "".
# {config-file}     Name of configuration file used.
#
proc-title-template "{title} {listen-addr} {server-mode}"

# Set the local environment which is used for string comparison operations, and
# also affect the performance of Lua scripts. Empty String indicates the locale
# is derived from the environment variables.
locale-collate ""

# Valkey is largely compatible with Redis OSS, apart from a few cases where
# Valkey identifies itself as "Valkey" rather than "Redis". Extended
# Redis OSS compatibility mode makes Valkey pretend to be Redis. Enable this
# only if you have problems with tools or clients. This is a temporary
# configuration added in Valkey 8.0 and is scheduled to have no effect and
# will be removed in a future version.
#
# extended-redis-compatibility no

# Inform Valkey of the availability zone if running in a cloud environment.  Currently
# this is exposed in the INFO and HELLO commands for clients to use. Default is
# the empty string.
#
# availability-zone "zone-name"

# Use a fixed hash seed for hashtable instead of a random one.
# Setting this option makes commands like SCAN return keys in a consistent
# order across restarts and failovers. The seed can be any string up to 256 characters.
# The value is immutable and must be provided only at server startup.
#
# hash-seed example-seed-val

################################ SNAPSHOTTING  ################################

# Save the DB to disk.
#
# save <seconds> <changes> [<seconds> <changes> ...]
#
# The server will save the DB if the given number of seconds elapsed and it
# surpassed the given number of write operations against the DB.
#
# Snapshotting can be completely disabled with a single empty string argument
# as in following example:
#
# save ""
#
# Unless specified otherwise, by default the server will save the DB:
#   * After 3600 seconds (an hour) if at least 1 change was performed
#   * After 300 seconds (5 minutes) if at least 100 changes were performed
#   * After 60 seconds if at least 10000 changes were performed
#
# You can set these explicitly by uncommenting the following line.
#
# save 3600 1 300 100 60 10000

# By default the server will stop accepting writes if RDB snapshots are enabled
# (at least one save point) and the latest background save failed.
# This will make the user aware (in a hard way) that data is not persisting
# on disk properly, otherwise chances are that no one will notice and some
# disaster will happen.
#
# If the background saving process will start working again, the server will
# automatically allow writes again.
#
# However if you have setup your proper monitoring of the server
# and persistence, you may want to disable this feature so that the server will
# continue to work as usual even if there are problems with disk,
# permissions, and so forth.
stop-writes-on-bgsave-error yes

# Compress string objects using LZF when dump .rdb databases?
# By default compression is enabled as it's almost always a win.
# If you want to save some CPU in the saving child set it to 'no' but
# the dataset will likely be bigger if you have compressible values or keys.
rdbcompression yes

# Since version 5 of RDB a CRC64 checksum is placed at the end of the file.
# This makes the format more resistant to corruption but there is a performance
# hit to pay (around 10%) when saving and loading RDB files, so you can disable it
# for maximum performances.
#
# RDB files created with checksum disabled have a checksum of zero that will
# tell the loading code to skip the check.
rdbchecksum yes

# Valkey can try to load an RDB dump produced by a future version of Valkey.
# This can only work on a best-effort basis, because future RDB versions may
# contain information that's not known to the current version. If no new features
# are used, it may be possible to import the data produced by a later version,
# but loading is aborted if unknown information is encountered. Possible values
# are 'strict' and 'relaxed'. This also applies to replication and the RESTORE
# command.
rdb-version-check strict

# Enables or disables full sanitization checks for ziplist and listpack etc when
# loading an RDB or RESTORE payload. This reduces the chances of a assertion or
# crash later on while processing commands.
# Options:
#   no         - Never perform full sanitization
#   yes        - Always perform full sanitization
#   clients    - Perform full sanitization only for user connections.
#                Excludes: RDB files, RESTORE commands received from the primary
#                connection, and client connections which have the
#                skip-sanitize-payload ACL flag.
# The default should be 'clients' but since it currently affects cluster
# resharding via MIGRATE, it is temporarily set to 'no' by default.
#
# sanitize-dump-payload no

# The filename where to dump the DB
dbfilename dump.rdb

# Remove RDB files used by replication in instances without persistence
# enabled. By default this option is disabled, however there are environments
# where for regulations or other security concerns, RDB files persisted on
# disk by primaries in order to feed replicas, or stored on disk by replicas
# in order to load them for the initial synchronization, should be deleted
# ASAP. Note that this option ONLY WORKS in instances that have both AOF
# and RDB persistence disabled, otherwise is completely ignored.
#
# An alternative (and sometimes better) way to obtain the same effect is
# to use diskless replication on both primary and replicas instances. However
# in the case of replicas, diskless is not always an option.
rdb-del-sync-files no

# The working directory.
#
# The server log is written relative this directory, if the 'logfile'
# configuration directive is a relative path.
#
# The DB will be written inside this directory, with the filename specified
# above using the 'dbfilename' configuration directive.
#
# The Append Only File will also be created inside this directory.
#
# The Cluster config file is written relative this directory, if the
# 'cluster-config-file' configuration directive is a relative path.
#
# Note that you must specify a directory here, not a file name.
# Note that modifying 'dir' during runtime may have unexpected behavior,
# for example when a child process is running, related file operations may
# have unexpected effects.
dir ./

################################# REPLICATION #################################

# Master-Replica replication. Use replicaof to make a server a copy of
# another server. A few things to understand ASAP about replication.
#
#   +------------------+      +---------------+
#   |      Master      | ---> |    Replica    |
#   | (receive writes) |      |  (exact copy) |
#   +------------------+      +---------------+
#
# 1) Replication is asynchronous, but you can configure a primary to
#    stop accepting writes if it appears to be not connected with at least
#    a given number of replicas.
# 2) Replicas are able to perform a partial resynchronization with the
#    primary if the replication link is lost for a relatively small amount of
#    time. You may want to configure the replication backlog size (see the next
#    sections of this file) with a sensible value depending on your needs.
# 3) Replication is automatic and does not need user intervention. After a
#    network partition replicas automatically try to reconnect to primaries
#    and resynchronize with them.
#
# replicaof <primary_ip> <primary_port>

# If the primary is password protected (using the "requirepass" configuration
# directive below) it is possible to tell the replica to authenticate before
# starting the replication synchronization process, otherwise the primary will
# refuse the replica request.
#
# primaryauth <primary-password>
#
# However this is not enough if you are using ACLs
# and the default user is not capable of running the PSYNC
# command and/or other commands needed for replication. In this case it's
# better to configure a special user to use with replication, and specify the
# primaryuser configuration as such:
#
# primaryuser <username>
#
# When primaryuser is specified, the replica will authenticate against its
# primary using the new AUTH form: AUTH <username> <password>.

# When a replica loses its connection with the primary, or when the replication
# is still in progress, the replica can act in two different ways:
#
# 1) if replica-serve-stale-data is set to 'yes' (the default) the replica will
#    still reply to client requests, possibly with out of date data, or the
#    data set may just be empty if this is the first synchronization.
#
# 2) If replica-serve-stale-data is set to 'no' the replica will reply with error
#    "MASTERDOWN Link with MASTER is down and replica-serve-stale-data is set to 'no'"
#    to all data access commands, excluding commands such as:
#    INFO, REPLICAOF, AUTH, SHUTDOWN, REPLCONF, ROLE, CONFIG, SUBSCRIBE,
#    UNSUBSCRIBE, PSUBSCRIBE, PUNSUBSCRIBE, PUBLISH, PUBSUB, COMMAND, POST,
#    HOST and LATENCY.
#
replica-serve-stale-data yes

# You can configure a replica instance to accept writes or not. Writing against
# a replica instance may be useful to store some ephemeral data (because data
# written on a replica will be easily deleted after resync with the primary) but
# may also cause problems if clients are writing to it because of a
# misconfiguration.
#
# By default, replicas are read-only.
#
# Note: read only replicas are not designed to be exposed to untrusted clients
# on the internet. It's just a protection layer against misuse of the instance.
# Still a read only replica exports by default all the administrative commands
# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve
# security of read only replicas using 'rename-command' to shadow all the
# administrative / dangerous commands.
replica-read-only yes

# Replication SYNC strategy: disk or socket.
#
# New replicas and reconnecting replicas that are not able to continue the
# replication process just receiving differences, need to do what is called a
# "full synchronization". An RDB file is transmitted from the primary to the
# replicas.
#
# The transmission can happen in two different ways:
#
# 1) Disk-backed: The primary creates a new process that writes the RDB
#                 file on disk. Later the file is transferred by the parent
#                 process to the replicas incrementally.
# 2) Diskless: The primary creates a new process that directly writes the
#              RDB file to replica sockets, without touching the disk at all.
#
# With disk-backed replication, while the RDB file is generated, more replicas
# can be queued and served with the RDB file as soon as the current child
# producing the RDB file finishes its work. With diskless replication instead
# once the transfer starts, new replicas arriving will be queued and a new
# transfer will start when the current one terminates.
#
# When diskless replication is used, the primary waits a configurable amount of
# time (in seconds) before starting the transfer in the hope that multiple
# replicas will arrive and the transfer can be parallelized.
#
# With slow disks and fast (large bandwidth) networks, diskless replication
# works better.
repl-diskless-sync yes

# When diskless replication is enabled, it is possible to configure the delay
# the server waits in order to spawn the child that transfers the RDB via socket
# to the replicas.
#
# This is important since once the transfer starts, it is not possible to serve
# new replicas arriving, that will be queued for the next RDB transfer, so the
# server waits a delay in order to let more replicas arrive.
#
# The delay is specified in seconds, and by default is 5 seconds. To disable
# it entirely just set it to 0 seconds and the transfer will start ASAP.
repl-diskless-sync-delay 5

# When diskless replication is enabled with a delay, it is possible to let
# the replication start before the maximum delay is reached if the maximum
# number of replicas expected have connected. Default of 0 means that the
# maximum is not defined and the server will wait the full delay.
repl-diskless-sync-max-replicas 0

# -----------------------------------------------------------------------------
# WARNING: Since in this setup the replica does not immediately store an RDB on
# disk, it may cause data loss during failovers. RDB diskless load + server
# modules not handling I/O reads may cause the server to abort in case of I/O errors
# during the initial synchronization stage with the primary.
# -----------------------------------------------------------------------------
#
# Replica can load the RDB it reads from the replication link directly from the
# socket, or store the RDB to a file and read that file after it was completely
# received from the primary.
#
# In many cases the disk is slower than the network, and storing and loading
# the RDB file may increase replication time (and even increase the primary's
# Copy on Write memory and replica buffers).
# However, when parsing the RDB file directly from the socket, in order to avoid
# data loss it's only safe to flush the current dataset when the new dataset is
# fully loaded in memory, resulting in higher memory usage.
# For this reason we have the following options:
#
# "disabled"          - Don't use diskless load (store the rdb file to the disk first)
# "swapdb"            - Keep current db contents in RAM while parsing the data directly
#                       from the socket. Replicas in this mode can keep serving current
#                       dataset while replication is in progress, except for cases where
#                       they can't recognize primary as having a data set from same
#                       replication history.
#                       Note that this requires sufficient memory, if you don't have it,
#                       you risk an OOM kill.
# "on-empty-db"       - Use diskless load only when current dataset is empty. This is
#                       safer and avoid having old and new dataset loaded side by side
#                       during replication.
# "flush-before-load" - [dangerous] Flush all data before parsing. Note that if
#                       there's a problem before the replication succeeded you may
#                       lose all your data.
repl-diskless-load disabled

# This dual channel replication sync feature optimizes the full synchronization process
# between a primary and its replicas. When enabled, it reduces both memory and CPU load
# on the primary server.
#
# How it works:
# 1. During full sync, instead of accumulating replication data on the primary server,
#    the data is sent directly to the syncing replica.
# 2. The primary's background save (bgsave) process streams the RDB snapshot directly
#    to the replica over a separate connection.
#
# Tradeoff:
# While this approach reduces load on the primary, it shifts the burden of storing
# the replication buffer to the replica. This means the replica must have sufficient
# memory to accommodate the buffer during synchronization. However, this tradeoff is
# generally beneficial as it prevents potential performance degradation on the primary
# server, which is typically handling more critical operations.
#
# During the dual channel full sync, the maximum size of the local replication buffer
# on the replica is limited by the hard limit of the replica client output buffer on
# the replica side. When the replica reaches the limit, it will stop accumulating the
# further data. At this point, any additional data accumulation will occur on primary
# side, which is depending on the replica client output buffer on the primary side.
#
# When toggling this configuration on or off during an ongoing synchronization process,
# it does not change the already running sync method. The new configuration will take
# effect only for subsequent synchronization processes.
#
# To enable dual channel replication, both the primary and its replicas should have
# dual-channel-replication-enabled set to yes. Additionally, the primary is required
# to have repl-diskless-sync enabled, as this allows the RDB snapshot to be streamed
# directly over the connection for the dual channel mechanism to function properly.
#
dual-channel-replication-enabled no

# Master send PINGs to its replicas in a predefined interval. It's possible to
# change this interval with the repl_ping_replica_period option. The default
# value is 10 seconds.
#
# repl-ping-replica-period 10

# The following option sets the replication timeout for:
#
# 1) Bulk transfer I/O during SYNC, from the point of view of replica.
# 2) Master timeout from the point of view of replicas (data, pings).
# 3) Replica timeout from the point of view of primaries (REPLCONF ACK pings).
#
# It is important to make sure that this value is greater than the value
# specified for repl-ping-replica-period otherwise a timeout will be detected
# every time there is low traffic between the primary and the replica. The default
# value is 60 seconds.
#
# repl-timeout 60

# Disable TCP_NODELAY on the replica socket after SYNC?
#
# If you select "yes", the server will use a smaller number of TCP packets and
# less bandwidth to send data to replicas. But this can add a delay for
# the data to appear on the replica side, up to 40 milliseconds with
# Linux kernels using a default configuration.
#
# If you select "no" the delay for data to appear on the replica side will
# be reduced but more bandwidth will be used for replication.
#
# By default we optimize for low latency, but in very high traffic conditions
# or when the primary and replicas are many hops away, turning this to "yes" may
# be a good idea.
repl-disable-tcp-nodelay no

# Enables MPTCP for the replica's connection to the primary.
#
# An MPTCP connection is established between the primary and the replica if
# the replica has set 'repl-mptcp yes' and the primary has set 'mptcp yes'.
# Otherwise, it will automatically and implicitly fall back to a regular TCP
# connection.
#
# repl-mptcp no

# Set the replication backlog size. The backlog is a buffer that accumulates
# replica data when replicas are disconnected for some time, so that when a
# replica wants to reconnect again, often a full resync is not needed, but a
# partial resync is enough, just passing the portion of data the replica
# missed while disconnected.
#
# The bigger the replication backlog, the longer the replica can endure the
# disconnect and later be able to perform a partial resynchronization.
#
# The backlog is only allocated if there is at least one replica connected.
#
# repl-backlog-size 10mb

# After a primary has no connected replicas for some time, the backlog will be
# freed. The following option configures the amount of seconds that need to
# elapse, starting from the time the last replica disconnected, for the backlog
# buffer to be freed.
#
# Note that replicas never free the backlog for timeout, since they may be
# promoted to primaries later, and should be able to correctly "partially
# resynchronize" with other replicas: hence they should always accumulate backlog.
#
# A value of 0 means to never release the backlog.
#
# repl-backlog-ttl 3600

# The replica priority is an integer number published by the server in the INFO
# output. It is used by Sentinel in order to select a replica to promote
# into a primary if the primary is no longer working correctly.
#
# A replica with a low priority number is considered better for promotion, so
# for instance if there are three replicas with priority 10, 100, 25 Sentinel
# will pick the one with priority 10, that is the lowest.
#
# However a special priority of 0 marks the replica as not able to perform the
# role of primary, so a replica with priority of 0 will never be selected by
# Sentinel for promotion.
#
# By default the priority is 100.
replica-priority 100

# The propagation error behavior controls how the server will behave when it is
# unable to handle a command being processed in the replication stream from a primary
# or processed while reading from an AOF file. Errors that occur during propagation
# are unexpected, and can cause data inconsistency.
#
# If an application wants to ensure there is no data divergence, this configuration
# should be set to 'panic' instead. The value can also be set to 'panic-on-replicas'
# to only panic when a replica encounters an error on the replication stream. One of
# these two panic values will become the default value in the future once there are
# sufficient safety mechanisms in place to prevent false positive crashes.
#
# propagation-error-behavior ignore

# Replica ignore disk write errors controls the behavior of a replica when it is
# unable to persist a write command received from its primary to disk. By default,
# this configuration is set to 'no' and will crash the replica in this condition.
# It is not recommended to change this default.
#
# replica-ignore-disk-write-errors no

# Make the primary forbid expiration and eviction.
# This is useful for sync tools, because expiration and eviction may cause the data corruption.
# Sync tools can mark their connections as importing source by CLIENT IMPORT-SOURCE.
# NOTICE: Clients should avoid writing the same key on the source server and the destination server.
#
# import-mode no

# -----------------------------------------------------------------------------
# By default, Sentinel includes all replicas in its reports. A replica
# can be excluded from Sentinel's announcements. An unannounced replica
# will be ignored by the 'sentinel replicas <primary>' command and won't be
# exposed to Sentinel's clients.
#
# This option does not change the behavior of replica-priority. Even with
# replica-announced set to 'no', the replica can be promoted to primary. To
# prevent this behavior, set replica-priority to 0.
#
# replica-announced yes

# It is possible for a primary to stop accepting writes if there are less than
# N replicas connected, having a lag less or equal than M seconds.
#
# The N replicas need to be in "online" state.
#
# The lag in seconds, that must be <= the specified value, is calculated from
# the last ping received from the replica, that is usually sent every second.
#
# This option does not GUARANTEE that N replicas will accept the write, but
# will limit the window of exposure for lost writes in case not enough replicas
# are available, to the specified number of seconds.
#
# For example to require at least 3 replicas with a lag <= 10 seconds use:
#
# min-replicas-to-write 3
# min-replicas-max-lag 10
#
# Setting one or the other to 0 disables the feature.
#
# By default min-replicas-to-write is set to 0 (feature disabled) and
# min-replicas-max-lag is set to 10.

# A primary is able to list the address and port of the attached
# replicas in different ways. For example the "INFO replication" section
# offers this information, which is used, among other tools, by
# Sentinel in order to discover replica instances.
# Another place where this info is available is in the output of the
# "ROLE" command of a primary.
#
# The listed IP address and port normally reported by a replica is
# obtained in the following way:
#
#   IP: The address is auto detected by checking the peer address
#   of the socket used by the replica to connect with the primary.
#
#   Port: The port is communicated by the replica during the replication
#   handshake, and is normally the port that the replica is using to
#   listen for connections.
#
# However when port forwarding or Network Address Translation (NAT) is
# used, the replica may actually be reachable via different IP and port
# pairs. The following two options can be used by a replica in order to
# report to its primary a specific set of IP and port, so that both INFO
# and ROLE will report those values.
#
# There is no need to use both the options if you need to override just
# the port or the IP address.
#
# replica-announce-ip 5.5.5.5
# replica-announce-port 1234

############################### KEYS TRACKING #################################

# The client side caching of values is assisted via server-side support.
# This is implemented using an invalidation table that remembers, using
# a radix key indexed by key name, what clients have which keys. In turn
# this is used in order to send invalidation messages to clients. Please
# check this page to understand more about the feature:
#
#   https://valkey.io/topics/client-side-caching
#
# When tracking is enabled for a client, all the read only queries are assumed
# to be cached: this will force the server to store information in the invalidation
# table. When keys are modified, such information is flushed away, and
# invalidation messages are sent to the clients. However if the workload is
# heavily dominated by reads, the server could use more and more memory in order
# to track the keys fetched by many clients.
#
# For this reason it is possible to configure a maximum fill value for the
# invalidation table. By default it is set to 1M of keys, and once this limit
# is reached, the server will start to evict keys in the invalidation table
# even if they were not modified, just to reclaim memory: this will in turn
# force the clients to invalidate the cached values. Basically the table
# maximum size is a trade off between the memory you want to spend server
# side to track information about who cached what, and the ability of clients
# to retain cached objects in memory.
#
# If you set the value to 0, it means there are no limits, and the server will
# retain as many keys as needed in the invalidation table.
# In the "stats" INFO section, you can find information about the number of
# keys in the invalidation table at every given moment.
#
# Note: when key tracking is used in broadcasting mode, no memory is used
# in the server side so this setting is useless.
#
# tracking-table-max-keys 1000000

################################## SECURITY ###################################

# Warning: since the server is pretty fast, an outside user can try up to
# 1 million passwords per second against a modern box. This means that you
# should use very strong passwords, otherwise they will be very easy to break.
# Note that because the password is really a shared secret between the client
# and the server, and should not be memorized by any human, the password
# can be easily a long string from /dev/urandom or whatever, so by using a
# long and unguessable password no brute force attack will be possible.

# ACL users are defined in the following format:
#
#   user <username> ... acl rules ...
#
# For example:
#
#   user worker +@list +@connection ~jobs:* on >ffa9203c493aa99
#
# The special username "default" is used for new connections. If this user
# has the "nopass" rule, then new connections will be immediately authenticated
# as the "default" user without the need of any password provided via the
# AUTH command. Otherwise if the "default" user is not flagged with "nopass"
# the connections will start in not authenticated state, and will require
# AUTH (or the HELLO command AUTH option) in order to be authenticated and
# start to work.
#
# The ACL rules that describe what a user can do are the following:
#
#  on           Enable the user: it is possible to authenticate as this user.
#  off          Disable the user: it's no longer possible to authenticate
#               with this user, however the already authenticated connections
#               will still work.
#  skip-sanitize-payload    RESTORE dump-payload sanitization is skipped.
#  sanitize-payload         RESTORE dump-payload is sanitized (default).
#  +<command>   Allow the execution of that command.
#               May be used with `|` for allowing subcommands (e.g "+config|get")
#  -<command>   Disallow the execution of that command.
#               May be used with `|` for blocking subcommands (e.g "-config|set")
#  +@<category> Allow the execution of all the commands in such category
#               with valid categories are like @admin, @set, @sortedset, ...
#               and so forth, see the full list in the server.c file where
#               the server command table is described and defined.
#               The special category @all means all the commands, but currently
#               present in the server, and that will be loaded in the future
#               via modules.
#  +<command>|first-arg  Allow a specific first argument of an otherwise
#                        disabled command. It is only supported on commands with
#                        no sub-commands, and is not allowed as negative form
#                        like -SELECT|1, only additive starting with "+". This
#                        feature is deprecated and may be removed in the future.
#  allcommands  Alias for +@all. Note that it implies the ability to execute
#               all the future commands loaded via the modules system.
#  nocommands   Alias for -@all.
#  ~<pattern>   Add a pattern of keys that can be mentioned as part of
#               commands. For instance ~* allows all the keys. The pattern
#               is a glob-style pattern like the one of KEYS.
#               It is possible to specify multiple patterns.
# %R~<pattern>  Add key read pattern that specifies which keys can be read
#               from.
# %W~<pattern>  Add key write pattern that specifies which keys can be
#               written to.
#  allkeys      Alias for ~*
#  resetkeys    Flush the list of allowed keys patterns.
#  &<pattern>   Add a glob-style pattern of Pub/Sub channels that can be
#               accessed by the user. It is possible to specify multiple channel
#               patterns.
#  allchannels  Alias for &*
#  resetchannels            Flush the list of allowed channel patterns.
#  ><password>  Add this password to the list of valid password for the user.
#               For example >mypass will add "mypass" to the list.
#               This directive clears the "nopass" flag (see later).
#  <<password>  Remove this password from the list of valid passwords.
#  nopass       All the set passwords of the user are removed, and the user
#               is flagged as requiring no password: it means that every
#               password will work against this user. If this directive is
#               used for the default user, every new connection will be
#               immediately authenticated with the default user without
#               any explicit AUTH command required. Note that the "resetpass"
#               directive will clear this condition.
#  resetpass    Flush the list of allowed passwords. Moreover removes the
#               "nopass" status. After "resetpass" the user has no associated
#               passwords and there is no way to authenticate without adding
#               some password (or setting it as "nopass" later).
#  reset        Performs the following actions: resetpass, resetkeys, resetchannels,
#               allchannels (if acl-pubsub-default is set), off, clearselectors, -@all.
#               The user returns to the same state it has immediately after its creation.
# (<options>)   Create a new selector with the options specified within the
#               parentheses and attach it to the user. Each option should be
#               space separated. The first character must be ( and the last
#               character must be ).
# clearselectors            Remove all of the currently attached selectors.
#                           Note this does not change the "root" user permissions,
#                           which are the permissions directly applied onto the
#                           user (outside the parentheses).
#
# ACL rules can be specified in any order: for instance you can start with
# passwords, then flags, or key patterns. However note that the additive
# and subtractive rules will CHANGE MEANING depending on the ordering.
# For instance see the following example:
#
#   user alice on +@all -DEBUG ~* >somepassword
#
# This will allow "alice" to use all the commands with the exception of the
# DEBUG command, since +@all added all the commands to the set of the commands
# alice can use, and later DEBUG was removed. However if we invert the order
# of two ACL rules the result will be different:
#
#   user alice on -DEBUG +@all ~* >somepassword
#
# Now DEBUG was removed when alice had yet no commands in the set of allowed
# commands, later all the commands are added, so the user will be able to
# execute everything.
#
# Basically ACL rules are processed left-to-right.
#
# The following is a list of command categories and their meanings:
# * keyspace - Writing or reading from keys, databases, or their metadata
#     in a type agnostic way. Includes DEL, RESTORE, DUMP, RENAME, EXISTS, DBSIZE,
#     KEYS, EXPIRE, TTL, FLUSHALL, etc. Commands that may modify the keyspace,
#     key or metadata will also have `write` category. Commands that only read
#     the keyspace, key or metadata will have the `read` category.
# * read - Reading from keys (values or metadata). Note that commands that don't
#     interact with keys, will not have either `read` or `write`.
# * write - Writing to keys (values or metadata)
# * admin - Administrative commands. Normal applications will never need to use
#     these. Includes REPLICAOF, CONFIG, DEBUG, SAVE, MONITOR, ACL, SHUTDOWN, etc.
# * dangerous - Potentially dangerous (each should be considered with care for
#     various reasons). This includes FLUSHALL, MIGRATE, RESTORE, SORT, KEYS,
#     CLIENT, DEBUG, INFO, CONFIG, SAVE, REPLICAOF, etc.
# * connection - Commands affecting the connection or other connections.
#     This includes AUTH, SELECT, COMMAND, CLIENT, ECHO, PING, etc.
# * blocking - Potentially blocking the connection until released by another
#     command.
# * fast - Fast O(1) commands. May loop on the number of arguments, but not the
#     number of elements in the key.
# * slow - All commands that are not Fast.
# * pubsub - PUBLISH / SUBSCRIBE related
# * transaction - WATCH / MULTI / EXEC related commands.
# * scripting - Scripting related.
# * set - Data type: sets related.
# * sortedset - Data type: zsets related.
# * list - Data type: lists related.
# * hash - Data type: hashes related.
# * string - Data type: strings related.
# * bitmap - Data type: bitmaps related.
# * hyperloglog - Data type: hyperloglog related.
# * geo - Data type: geo related.
# * stream - Data type: streams related.
#
# For more information about ACL configuration please refer to
# the Valkey web site at https://valkey.io/topics/acl

# ACL LOG
#
# The ACL Log tracks failed commands and authentication events associated
# with ACLs. The ACL Log is useful to troubleshoot failed commands blocked
# by ACLs. The ACL Log is stored in memory. You can reclaim memory with
# ACL LOG RESET. Define the maximum entry length of the ACL Log below.
acllog-max-len 128

# Using an external ACL file
#
# Instead of configuring users here in this file, it is possible to use
# a stand-alone file just listing users. The two methods cannot be mixed:
# if you configure users here and at the same time you activate the external
# ACL file, the server will refuse to start.
#
# The format of the external ACL user file is exactly the same as the
# format that is used inside valkey.conf to describe users.
#
# aclfile /etc/valkey/users.acl

# IMPORTANT NOTE: "requirepass" is just a compatibility
# layer on top of the new ACL system. The option effect will be just setting
# the password for the default user. Clients will still authenticate using
# AUTH <password> as usually, or more explicitly with AUTH default <password>
# if they follow the new protocol: both will work.
#
# The requirepass is not compatible with aclfile option and the ACL LOAD
# command, these will cause requirepass to be ignored.
#
# requirepass foobared

# The default Pub/Sub channels permission for new users is controlled by the
# acl-pubsub-default configuration directive, which accepts one of these values:
#
# allchannels: grants access to all Pub/Sub channels
# resetchannels: revokes access to all Pub/Sub channels
#
# acl-pubsub-default defaults to 'resetchannels' permission.
#
# acl-pubsub-default resetchannels

# Command renaming (DEPRECATED).
#
# ------------------------------------------------------------------------
# WARNING: avoid using this option if possible. Instead use ACLs to remove
# commands from the default user, and put them only in some admin user you
# create for administrative purposes.
# ------------------------------------------------------------------------
#
# It is possible to change the name of dangerous commands in a shared
# environment. For instance the CONFIG command may be renamed into something
# hard to guess so that it will still be available for internal-use tools
# but not available for general clients.
#
# Example:
#
# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
#
# It is also possible to completely kill a command by renaming it into
# an empty string:
#
# rename-command CONFIG ""
#
# Please note that changing the name of commands that are logged into the
# AOF file or transmitted to replicas may cause problems.

################################### CLIENTS ####################################

# Set the max number of connected clients at the same time. By default
# this limit is set to 10000 clients, however if the server is not
# able to configure the process file limit to allow for the specified limit
# the max number of allowed clients is set to the current file limit
# minus 32 (as the server reserves a few file descriptors for internal uses).
#
# Once the limit is reached the server will close all the new connections sending
# an error 'max number of clients reached'.
#
# IMPORTANT: With a cluster-enabled setup, the max number of connections is also
# shared with the cluster bus: every node in the cluster will use two
# connections, one incoming and another outgoing. It is important to size the
# limit accordingly in case of very large clusters.
#
# maxclients 10000

############################## MEMORY MANAGEMENT ################################

# Set a memory usage limit to the specified amount of bytes.
# When the memory limit is reached the server will try to remove keys
# according to the eviction policy selected (see maxmemory-policy).
#
# If the server can't remove keys according to the policy, or if the policy is
# set to 'noeviction', the server will start to reply with errors to commands
# that would use more memory, like SET, LPUSH, and so on, and will continue
# to reply to read-only commands like GET.
#
# This option is usually useful when using the server as an LRU or LFU cache, or to
# set a hard memory limit for an instance (using the 'noeviction' policy).
#
# WARNING: If you have replicas attached to an instance with maxmemory on,
# the size of the output buffers needed to feed the replicas are subtracted
# from the used memory count, so that network problems / resyncs will
# not trigger a loop where keys are evicted, and in turn the output
# buffer of replicas is full with DELs of keys evicted triggering the deletion
# of more keys, and so forth until the database is completely emptied.
#
# In short... if you have replicas attached it is suggested that you set a lower
# limit for maxmemory so that there is some free RAM on the system for replica
# output buffers (but this is not needed if the policy is 'noeviction').
#
# maxmemory <bytes>

# MAXMEMORY POLICY: how the server will select what to remove when maxmemory
# is reached. You can select one from the following behaviors:
#
# volatile-lru -> Evict using approximated LRU, only keys with an expire set.
# allkeys-lru -> Evict any key using approximated LRU.
# volatile-lfu -> Evict using approximated LFU, only keys with an expire set.
# allkeys-lfu -> Evict any key using approximated LFU.
# volatile-random -> Remove a random key having an expire set.
# allkeys-random -> Remove a random key, any key.
# volatile-ttl -> Remove the key with the nearest expire time (minor TTL)
# noeviction -> Don't evict anything, just return an error on write operations.
#
# LRU means Least Recently Used
# LFU means Least Frequently Used
#
# Both LRU, LFU and volatile-ttl are implemented using approximated
# randomized algorithms.
#
# Note: with any of the above policies, when there are no suitable keys for
# eviction, the server will return an error on write operations that require
# more memory. These are usually commands that create new keys, add data or
# modify existing keys. A few examples are: SET, INCR, HSET, LPUSH, SUNIONSTORE,
# SORT (due to the STORE argument), and EXEC (if the transaction includes any
# command that requires memory).
#
# The default is:
#
# maxmemory-policy noeviction

# LRU, LFU and minimal TTL algorithms are not precise algorithms but approximated
# algorithms (in order to save memory), so you can tune it for speed or
# accuracy. By default the server will check five keys and pick the one that was
# used least recently, you can change the sample size using the following
# configuration directive.
#
# The default of 5 produces good enough results. 10 Approximates very closely
# true LRU but costs more CPU. 3 is faster but not very accurate. The maximum
# value that can be set is 64.
#
# maxmemory-samples 5

# Eviction processing is designed to function well with the default setting.
# If there is an unusually large amount of write traffic, this value may need to
# be increased.  Decreasing this value may reduce latency at the risk of
# eviction processing effectiveness
#   0 = minimum latency, 10 = default, 100 = process without regard to latency
#
# maxmemory-eviction-tenacity 10

# By default a replica will ignore its maxmemory setting
# (unless it is promoted to primary after a failover or manually). It means
# that the eviction of keys will be just handled by the primary, sending the
# DEL commands to the replica as keys evict in the primary side.
#
# This behavior ensures that primaries and replicas stay consistent, and is usually
# what you want, however if your replica is writable, or you want the replica
# to have a different memory setting, and you are sure all the writes performed
# to the replica are idempotent, then you may change this default (but be sure
# to understand what you are doing).
#
# Note that since the replica by default does not evict, it may end using more
# memory than the one set via maxmemory (there are certain buffers that may
# be larger on the replica, or data structures may sometimes take more memory
# and so forth). So make sure you monitor your replicas and make sure they
# have enough memory to never hit a real out-of-memory condition before the
# primary hits the configured maxmemory setting.
#
# replica-ignore-maxmemory yes

# The server reclaims expired keys in two ways: upon access when those keys are
# found to be expired, and also in the background, in what is called the
# "active expire key". The key space is slowly and incrementally scanned
# looking for expired keys to reclaim, so that it is possible to free memory
# of keys that are expired and will never be accessed again in a short time.
#
# The default effort of the expire cycle will try to avoid having more than
# ten percent of expired keys still in memory, and will try to avoid consuming
# more than 25% of total memory and to add latency to the system. However
# it is possible to increase the expire "effort" that is normally set to
# "1", to a greater value, up to the value "10". At its maximum value the
# system will use more CPU, longer cycles (and technically may introduce
# more latency), and will tolerate less already expired keys still present
# in the system. It's a tradeoff between memory, CPU and latency.
#
# active-expire-effort 1

############################# LAZY FREEING ####################################

# When keys are deleted, the served has historically freed their memory using
# blocking operations. It means that the server stopped processing new commands
# in order to reclaim all the memory associated with an object in a synchronous
# way. If the key deleted is associated with a small object, the time needed
# in order to execute the DEL command is very small and comparable to most other
# O(1) or O(log_N) commands in the server. However if the key is associated with an
# aggregated value containing millions of elements, the server can block for
# a long time (even seconds) in order to complete the operation.
#
# For the above reasons, lazy freeing (or asynchronous freeing), has been
# introduced. With lazy freeing, keys are deleted in constant time. Another
# thread will incrementally free the object in the background as fast as
# possible.
#
# Starting from Valkey 8.0, lazy freeing is enabled by default. It is possible
# to retain the synchronous freeing behaviour by setting the lazyfree related
# configuration directives to 'no'.

# Commands like DEL, FLUSHALL and FLUSHDB delete keys, but the server can also
# delete keys or flush the whole database as a side effect of other operations.
# Specifically the server deletes objects independently of a user call in the
# following scenarios:
#
# 1) On eviction, because of the maxmemory and maxmemory policy configurations,
#    in order to make room for new data, without going over the specified
#    memory limit.
# 2) Because of expire: when a key with an associated time to live (see the
#    EXPIRE command) must be deleted from memory.
# 3) Because of a side effect of a command that stores data on a key that may
#    already exist. For example the RENAME command may delete the old key
#    content when it is replaced with another one. Similarly SUNIONSTORE
#    or SORT with STORE option may delete existing keys. The SET command
#    itself removes any old content of the specified key in order to replace
#    it with the specified string.
# 4) During replication, when a replica performs a full resynchronization with
#    its primary, the content of the whole database is removed in order to
#    load the RDB file just transferred.
#
# In all the above cases, the default is to release memory in a non-blocking
# way.

lazyfree-lazy-eviction yes
lazyfree-lazy-expire yes
lazyfree-lazy-server-del yes
replica-lazy-flush yes

# For keys deleted using the DEL command, lazy freeing is controlled by the
# configuration directive 'lazyfree-lazy-user-del'. The default is 'yes'. The
# UNLINK command is identical to the DEL command, except that UNLINK always
# frees the memory lazily, regardless of this configuration directive:

lazyfree-lazy-user-del yes

# FLUSHDB, FLUSHALL, SCRIPT FLUSH and FUNCTION FLUSH support both asynchronous and synchronous
# deletion, which can be controlled by passing the [SYNC|ASYNC] flags into the
# commands. When neither flag is passed, this directive will be used to determine
# if the data should be deleted asynchronously.
#
# When a replica performs a node reset via CLUSTER RESET, the entire
# database content is removed to allow the node to become an empty primary.
# This directive also determines whether the data should be deleted asynchronously.
#
# There are many problems with running flush synchronously. Even in single CPU
# environments, the thread managers should balance between the freeing and
# serving incoming requests. The default value is yes.

lazyfree-lazy-user-flush yes

################################ THREADED I/O #################################

# The server is mostly single threaded, however there are certain threaded
# operations such as UNLINK, slow I/O accesses and other things that are
# performed on side threads.
#
# Now it is also possible to handle the server clients socket reads and writes
# in different I/O threads. Since especially writing is so slow, normally
# users use pipelining in order to speed up the server performances per
# core, and spawn multiple instances in order to scale more. Using I/O
# threads it is possible to easily speedup two times the server without resorting
# to pipelining nor sharding of the instance.
#
# By default threading is disabled, we suggest enabling it only in machines
# that have at least 3 or more cores, leaving at least one spare core.
# We also recommend using threaded I/O only if you actually have performance problems, with
# instances being able to use a quite big percentage of CPU time, otherwise
# there is no point in using this feature.
#
# So for instance if you have a four cores boxes, try to use 2 or 3 I/O
# threads, if you have a 8 cores, try to use 6 threads. In order to
# enable I/O threads use the following configuration directive:
#
# io-threads 4
#
# Setting io-threads to 1 will just use the main thread as usual.
# When I/O threads are enabled, we use threads for reads and writes, that is
# to thread the write and read syscall and transfer the client buffers to the
# socket and to enable threading of reads and protocol parsing.
#
#
# NOTE:
# 1. The 'io-threads-do-reads' config is deprecated and has no effect. Please
# avoid using this config if possible.
#
# 2. If you want to test the server speedup using valkey-benchmark, make
# sure you also run the benchmark itself in threaded mode, using the
# --threads option to match the number of server threads, otherwise you'll not
# be able to notice the improvements.

############################ KERNEL OOM CONTROL ##############################

# On Linux, it is possible to hint the kernel OOM killer on what processes
# should be killed first when out of memory.
#
# Enabling this feature makes the server actively control the oom_score_adj value
# for all its processes, depending on their role. The default scores will
# attempt to have background child processes killed before all others, and
# replicas killed before primaries.
#
# The server supports these options:
#
# no:       Don't make changes to oom-score-adj (default).
# yes:      Alias to "relative" see below.
# absolute: Values in oom-score-adj-values are written as is to the kernel.
# relative: Values are used relative to the initial value of oom_score_adj when
#           the server starts and are then clamped to a range of -1000 to 1000.
#           Because typically the initial value is 0, they will often match the
#           absolute values.
oom-score-adj no

# When oom-score-adj is used, this directive controls the specific values used
# for primary, replica and background child processes. Values range -2000 to
# 2000 (higher means more likely to be killed).
#
# Unprivileged processes (not root, and without CAP_SYS_RESOURCE capabilities)
# can freely increase their value, but not decrease it below its initial
# settings. This means that setting oom-score-adj to "relative" and setting the
# oom-score-adj-values to positive values will always succeed.
oom-score-adj-values 0 200 800


#################### KERNEL transparent hugepage CONTROL ######################

# Usually the kernel Transparent Huge Pages control is set to "madvise" or
# "never" by default (/sys/kernel/mm/transparent_hugepage/enabled), in which
# case this config has no effect. On systems in which it is set to "always",
# the server will attempt to disable it specifically for the server process in order
# to avoid latency problems specifically with fork(2) and CoW.
# If for some reason you prefer to keep it enabled, you can set this config to
# "no" and the kernel global to "always".

disable-thp yes

############################## APPEND ONLY MODE ###############################

# By default the server asynchronously dumps the dataset on disk. This mode is
# good enough in many applications, but an issue with the server process or
# a power outage may result into a few minutes of writes lost (depending on
# the configured save points).
#
# The Append Only File is an alternative persistence mode that provides
# much better durability. For instance using the default data fsync policy
# (see later in the config file) the server can lose just one second of writes in a
# dramatic event like a server power outage, or a single write if something
# wrong with the process itself happens, but the operating system is
# still running correctly.
#
# AOF and RDB persistence can be enabled at the same time without problems.
# If the AOF is enabled on startup the server will load the AOF, that is the file
# with the better durability guarantees.
#
# Note that changing this value in a config file of an existing database and
# restarting the server can lead to data loss. A conversion needs to be done
# by setting it via CONFIG command on a live server first.
#
# Please check https://valkey.io/topics/persistence for more information.

appendonly no

# The base name of the append only file.
#
# The server uses a set of append-only files to persist the dataset
# and changes applied to it. There are two basic types of files in use:
#
# - Base files, which are a snapshot representing the complete state of the
#   dataset at the time the file was created. Base files can be either in
#   the form of RDB (binary serialized) or AOF (textual commands).
# - Incremental files, which contain additional commands that were applied
#   to the dataset following the previous file.
#
# In addition, manifest files are used to track the files and the order in
# which they were created and should be applied.
#
# Append-only file names are created by the server following a specific pattern.
# The file name's prefix is based on the 'appendfilename' configuration
# parameter, followed by additional information about the sequence and type.
#
# For example, if appendfilename is set to appendonly.aof, the following file
# names could be derived:
#
# - appendonly.aof.1.base.rdb as a base file.
# - appendonly.aof.1.incr.aof, appendonly.aof.2.incr.aof as incremental files.
# - appendonly.aof.manifest as a manifest file.

appendfilename "appendonly.aof"

# For convenience, the server stores all persistent append-only files in a dedicated
# directory. The name of the directory is determined by the appenddirname
# configuration parameter.

appenddirname "appendonlydir"

# The fsync() call tells the Operating System to actually write data on disk
# instead of waiting for more data in the output buffer. Some OS will really flush
# data on disk, some other OS will just try to do it ASAP.
#
# The server supports three different modes:
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log. Slow, Safest.
# everysec: fsync only one time every second. Compromise.
#
# The default is "everysec", as that's usually the right compromise between
# speed and data safety. It's up to you to understand if you can relax this to
# "no" that will let the operating system flush the output buffer when
# it wants, for better performances (but if you can live with the idea of
# some data loss consider the default persistence mode that's snapshotting),
# or on the contrary, use "always" that's very slow but a bit safer than
# everysec.
#
# More details please check the following article:
# http://antirez.com/post/redis-persistence-demystified.html
#
# If unsure, use "everysec".

# appendfsync always
appendfsync everysec
# appendfsync no

# When the AOF fsync policy is set to always or everysec, and a background
# saving process (a background save or AOF log background rewriting) is
# performing a lot of I/O against the disk, in some Linux configurations
# the server may block too long on the fsync() call. Note that there is no fix for
# this currently, as even performing fsync in a different thread will block
# our synchronous write(2) call.
#
# In order to mitigate this problem it's possible to use the following option
# that will prevent fsync() from being called in the main process while a
# BGSAVE or BGREWRITEAOF is in progress.
#
# This means that while another child is saving, the durability of the server is
# the same as "appendfsync no". In practical terms, this means that it is
# possible to lose up to 30 seconds of log in the worst scenario (with the
# default Linux settings).
#
# If you have latency problems turn this to "yes". Otherwise leave it as
# "no" that is the safest pick from the point of view of durability.

no-appendfsync-on-rewrite no

# Automatic rewrite of the append only file.
# The server is able to automatically rewrite the log file implicitly calling
# BGREWRITEAOF when the AOF log size grows by the specified percentage.
#
# This is how it works: The server remembers the size of the AOF file after the
# latest rewrite (if no rewrite has happened since the restart, the size of
# the AOF at startup is used).
#
# This base size is compared to the current size. If the current size is
# bigger than the specified percentage, the rewrite is triggered. Also
# you need to specify a minimal size for the AOF file to be rewritten, this
# is useful to avoid rewriting the AOF file even if the percentage increase
# is reached but it is still pretty small.
#
# Specify a percentage of zero in order to disable the automatic AOF
# rewrite feature.

auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb

# An AOF file may be found to be truncated at the end during the server
# startup process, when the AOF data gets loaded back into memory.
# This may happen when the system where the server is running
# crashes, especially when an ext4 filesystem is mounted without the
# data=ordered option (however this can't happen when the server itself
# crashes or aborts but the operating system still works correctly).
#
# The server can either exit with an error when this happens, or load as much
# data as possible (the default now) and start if the AOF file is found
# to be truncated at the end. The following option controls this behavior.
#
# If aof-load-truncated is set to yes, a truncated AOF file is loaded and
# the server starts emitting a log to inform the user of the event.
# Otherwise if the option is set to no, the server aborts with an error
# and refuses to start. When the option is set to no, the user requires
# to fix the AOF file using the "valkey-check-aof" utility before to restart
# the server.
#
# Note that if the AOF file will be found to be corrupted in the middle
# the server will still exit with an error. This option only applies when
# the server will try to read more data from the AOF file but not enough bytes
# will be found.
aof-load-truncated yes

# The server can create append-only base files in either RDB or AOF formats. Using
# the RDB format is always faster and more efficient, and disabling it is only
# supported for backward compatibility purposes.
aof-use-rdb-preamble yes

# The server supports recording timestamp annotations in the AOF to support restoring
# the data from a specific point-in-time. However, using this capability changes
# the AOF format in a way that may not be compatible with existing AOF parsers.
aof-timestamp-enabled no

################################ SHUTDOWN #####################################

# Maximum time to wait for replicas when shutting down, in seconds.
#
# During shut down, a grace period allows any lagging replicas to catch up with
# the latest replication offset before the primary exits. This period can
# prevent data loss, especially for deployments without configured disk backups.
#
# The 'shutdown-timeout' value is the grace period's duration in seconds. It is
# only applicable when the instance has replicas. To disable the feature, set
# the value to 0.
#
# shutdown-timeout 10

# When the server receives a SIGINT or SIGTERM, shutdown is initiated and by default
# an RDB snapshot is written to disk in a blocking operation if save points are configured.
# The options used on signaled shutdown can include the following values:
#
# default:  Saves RDB snapshot only if save points are configured.
#           Waits for lagging replicas to catch up.
# save:     Forces a DB saving operation even if no save points are configured.
# nosave:   Prevents DB saving operation even if one or more save points are configured.
# now:      Skips waiting for lagging replicas.
# force:    Ignores any errors that would normally prevent the server from exiting.
# safe:     Shut down only when safe. Note that safe cannot prevent force, in the case of
#           force, safe will print the relevant logs. The definition of safe may be different
#           in different modes. Here are the definitions:
#           * In cluster mode, it is unsafe to shut down a primary with slots, and may cause
#             the cluster to go down.
# failover: In cluster mode, when shutting down a primary, it can proactively
#           initiate a manual failover. This promotes one of its replicas to
#           primary before shutdown, resulting in a quicker and safer transition
#           than relying on an automatic failover. For a replica to be eligible
#           for this promotion, it must be fully synchronized with the primary
#           node at the time of the shutdown signal after waiting up to the
#           configured shutdown-timeout. If no such replica is found, this
#           proactive failover will not occur.
#
# Any combination of values is allowed as long as "save" and "nosave" are not set simultaneously.
# Example: "nosave force now"
#
# shutdown-on-sigint default
# shutdown-on-sigterm default

################ NON-DETERMINISTIC LONG BLOCKING COMMANDS #####################

# Maximum time in milliseconds for EVAL scripts, functions and in some cases
# modules' commands before the server can start processing or rejecting other clients.
#
# If the maximum execution time is reached the server will start to reply to most
# commands with a BUSY error.
#
# In this state the server will only allow a handful of commands to be executed.
# For instance, SCRIPT KILL, FUNCTION KILL, SHUTDOWN NOSAVE and possibly some
# module specific 'allow-busy' commands.
#
# SCRIPT KILL and FUNCTION KILL will only be able to stop a script that did not
# yet call any write commands, so SHUTDOWN NOSAVE may be the only way to stop
# the server in the case a write command was already issued by the script when
# the user doesn't want to wait for the natural termination of the script.
#
# The default is 5 seconds. It is possible to set it to 0 to disable this 
# mechanism (uninterrupted execution). Note that in the past this config had a 
# different name, which is now an alias, so both of these do
# the same:
# lua-time-limit 5000
# busy-reply-threshold 5000

################################ VALKEY CLUSTER  ###############################

# Normal server instances can't be part of a cluster; only nodes that are
# started as cluster nodes can. In order to start a server instance as a
# cluster node enable the cluster support uncommenting the following:
#
# cluster-enabled yes

# Every cluster node has a cluster configuration file. This file is not
# intended to be edited by hand. It is created and updated by each node.
# Every cluster node requires a different cluster configuration file.
# Make sure that instances running in the same system do not have
# overlapping cluster configuration file names.
#
# cluster-config-file nodes-6379.conf

# This option controls how the cluster handles the saving behavior of the
# "cluster-config-file" file.
#
# When cluster metadata changes (e.g., node joins/leaves, slot migrations,
# failovers), the cluster needs to save the updated configuration to the
# "cluster-config-file" file.
#
# Available options:
#
# - sync (default): Synchronously save the config file. If the save fails,
#   the process exits immediately. This is the traditional behavior that
#   prioritizes configuration consistency.
#
# - best-effort: Synchronously save the config file. If the save fails,
#   only log a warning and continue running. The node will retry saving
#   on the next configuration change. Passive exit may bring unexpected
#   effects, such as cluster down. This mode allows the node to survive
#   temporary disk failures, giving administrators time to address the
#   issue without causing immediate service disruption.
#
# Note: The 'best-effort' mode is particularly useful in some environments.
# However, if the disk issue persists and the node restarts, it may load
# stale configuration data. Use with caution and ensure proper monitoring.
#
# cluster-config-save-behavior sync

# Cluster node timeout is the amount of milliseconds a node must be unreachable
# for it to be considered in failure state.
# Most other internal time limits are a multiple of the node timeout.
#
# cluster-node-timeout 15000

# The cluster port is the port that the cluster bus will listen for inbound connections on. When set
# to the default value, 0, it will be bound to the command port + 10000. Setting this value requires
# you to specify the cluster bus port when executing cluster meet.
# cluster-port 0

# A replica of a failing primary will avoid to start a failover if its data
# looks too old.
#
# There is no simple way for a replica to actually have an exact measure of
# its "data age", so the following two checks are performed:
#
# 1) If there are multiple replicas able to failover, they exchange messages
#    in order to try to give an advantage to the replica with the best
#    replication offset (more data from the primary processed).
#    Replicas will try to get their rank by offset, and apply to the start
#    of the failover a delay proportional to their rank.
#
# 2) Every single replica computes the time of the last interaction with
#    its primary. This can be the last ping or command received (if the primary
#    is still in the "connected" state), or the time that elapsed since the
#    disconnection with the primary (if the replication link is currently down).
#    If the last interaction is too old, the replica will not try to failover
#    at all.
#
# The point "2" can be tuned by user. Specifically a replica will not perform
# the failover if, since the last interaction with the primary, the time
# elapsed is greater than:
#
#   (node-timeout * cluster-replica-validity-factor) + repl-ping-replica-period
#
# So for example if node-timeout is 30 seconds, and the cluster-replica-validity-factor
# is 10, and assuming a default repl-ping-replica-period of 10 seconds, the
# replica will not try to failover if it was not able to talk with the primary
# for longer than 310 seconds.
#
# A large cluster-replica-validity-factor may allow replicas with too old data to failover
# a primary, while a too small value may prevent the cluster from being able to
# elect a replica at all.
#
# For maximum availability, it is possible to set the cluster-replica-validity-factor
# to a value of 0, which means, that replicas will always try to failover the
# primary regardless of the last time they interacted with the primary.
# (However they'll always try to apply a delay proportional to their
# offset rank).
#
# Zero is the only value able to guarantee that when all the partitions heal
# the cluster will always be able to continue.
#
# cluster-replica-validity-factor 10

# Cluster replicas are able to migrate to orphaned primaries, that are primaries
# that are left without working replicas. This improves the cluster ability
# to resist to failures as otherwise an orphaned primary can't be failed over
# in case of failure if it has no working replicas.
#
# Replicas migrate to orphaned primaries only if there are still at least a
# given number of other working replicas for their old primary. This number
# is the "migration barrier". A migration barrier of 1 means that a replica
# will migrate only if there is at least 1 other working replica for its primary
# and so forth. It usually reflects the number of replicas you want for every
# primary in your cluster.
#
# Default is 1 (replicas migrate only if their primaries remain with at least
# one replica). To disable migration just set it to a very large value or
# set cluster-allow-replica-migration to 'no'.
# A value of 0 can be set but is useful only for debugging and dangerous
# in production.
#
# cluster-migration-barrier 1

# Turning off this option allows to use less automatic cluster configuration.
# It disables migration of replicas to orphaned primaries. Masters that become
# empty due to losing their last slots to another primary will not automatically
# replicate from the primary that took over their last slots. Instead, they will
# remain as empty primaries without any slots.
#
# Default is 'yes' (allow automatic migrations).
#
# cluster-allow-replica-migration yes

# By default cluster nodes stop accepting queries if they detect there
# is at least a hash slot uncovered (no available node is serving it).
# This way if the cluster is partially down (for example a range of hash slots
# are no longer covered) all the cluster becomes, eventually, unavailable.
# It automatically returns available as soon as all the slots are covered again.
#
# However sometimes you want the subset of the cluster which is working,
# to continue to accept queries for the part of the key space that is still
# covered. In order to do so, just set the cluster-require-full-coverage
# option to no.
#
# cluster-require-full-coverage yes

# This option, when set to yes, prevents replicas from trying to failover its
# primary during primary failures. However the replica can still perform a
# manual failover, if forced to do so.
#
# This is useful in different scenarios, especially in the case of multiple
# data center operations, where we want one side to never be promoted if not
# in the case of a total DC failure.
#
# cluster-replica-no-failover no

# The timeout in milliseconds for cluster manual failover. If a manual failover
# does not complete within the specified time, both the replica and the primary
# will abort it. Note that this timeout is also used for the finalization of
# migrations initiated with the CLUSTER MIGRATESLOTS command.
#
# A manual failover is a special kind of failover that is usually executed when
# there are no actual failures, and we wish to swap the current primary with one
# of its replicas in a safe way, without any window for data loss.
#
# To avoid data loss, the primary and the replica need to wait for each other for
# a period of time, the primary need to pause the clients writes to stop processing
# traffic. The default failover timeout is 5000ms, it is possible to configure the
# timeout and decide how long the primary will pause in the worst case scenario,
# i.e. the manual failover timed out due to the insufficient votes.
#
# Check https://valkey.io/commands/cluster-failover/ for more information.
#
# cluster-manual-failover-timeout 5000

# This option, when set to yes, allows nodes to serve read traffic while the
# cluster is in a down state, as long as it believes it owns the slots.
#
# This is useful for two cases.  The first case is for when an application
# doesn't require consistency of data during node failures or network partitions.
# One example of this is a cache, where as long as the node has the data it
# should be able to serve it.
#
# The second use case is for configurations that don't meet the recommended
# three shards but want to enable cluster mode and scale later. A
# primary outage in a 1 or 2 shard configuration causes a read/write outage to the
# entire cluster without this option set, with it set there is only a write outage.
# Without a quorum of primaries, slot ownership will not change automatically.
#
# cluster-allow-reads-when-down no

# This option, when set to yes, allows nodes to serve pubsub shard traffic while
# the cluster is in a down state, as long as it believes it owns the slots.
#
# This is useful if the application would like to use the pubsub feature even when
# the cluster global stable state is not OK. If the application wants to make sure only
# one shard is serving a given channel, this feature should be kept as yes.
#
# cluster-allow-pubsubshard-when-down yes

# Cluster link send buffer limit is the limit on the memory usage of an individual
# cluster bus link's send buffer in bytes. Cluster links would be freed if they exceed
# this limit. This is to primarily prevent send buffers from growing unbounded on links
# toward slow peers (E.g. PubSub messages being piled up).
# This limit is disabled by default. Enable this limit when 'mem_cluster_links' INFO field
# and/or 'send-buffer-allocated' entries in the 'CLUSTER LINKS` command output continuously increase.
# Minimum limit of 1gb is recommended so that cluster link buffer can fit in at least a single
# PubSub message by default. (client-query-buffer-limit default value is 1gb)
#
# cluster-link-sendbuf-limit 0

# Clusters can configure their announced hostname using this config. This is a common use case for
# applications that need to use TLS Server Name Indication (SNI) or dealing with DNS based
# routing. By default this value is only shown as additional metadata in the CLUSTER SLOTS
# command, but can be changed using 'cluster-preferred-endpoint-type' config. This value is
# communicated along the clusterbus to all nodes, setting it to an empty string will remove
# the hostname and also propagate the removal.
#
# cluster-announce-hostname ""

# Clusters can configure an optional nodename to be used in addition to the node ID for
# debugging and admin information. This name is broadcasted between nodes, so will be used
# in addition to the node ID when reporting cross node events such as node failures.
# cluster-announce-human-nodename ""

# Clusters can advertise how clients should connect to them using either their IP address,
# a user defined hostname, or by declaring they have no endpoint. Which endpoint is
# shown as the preferred endpoint is set by using the cluster-preferred-endpoint-type
# config with values 'ip', 'hostname', or 'unknown-endpoint'. This value controls how
# the endpoint returned for MOVED/ASKING requests as well as the first field of CLUSTER SLOTS.
# If the preferred endpoint type is set to hostname, but no announced hostname is set, a '?'
# will be returned instead.
#
# When a cluster advertises itself as having an unknown endpoint, it's indicating that
# the server doesn't know how clients can reach the cluster. This can happen in certain
# networking situations where there are multiple possible routes to the node, and the
# server doesn't know which one the client took. In this case, the server is expecting
# the client to reach out on the same endpoint it used for making the last request, but use
# the port provided in the response.
#
# cluster-preferred-endpoint-type ip

# The cluster blacklist is used when removing a node from the cluster completely.
# When CLUSTER FORGET is called for a node, that node is put into the blacklist for
# some time so that when gossip messages are received from other nodes that still
# remember it, it is not re-added. This gives time for CLUSTER FORGET to be sent to
# every node in the cluster. The blacklist TTL is 60 seconds by default, which should
# be sufficient for most clusters, but you may considering increasing this if you see
# nodes getting re-added while using CLUSTER FORGET.
#
# cluster-blacklist-ttl 60

# Clusters can be configured to track per-slot resource statistics,
# which are accessible by the CLUSTER SLOT-STATS command.
#
# By default, the 'cluster-slot-stats-enabled' is disabled, and only 'key-count' is captured.
# By enabling the 'cluster-slot-stats-enabled' config, the cluster will begin to capture advanced statistics.
# These statistics can be leveraged to assess general slot usage trends, identify hot / cold slots,
# migrate slots for a balanced cluster workload, and / or re-write application logic to better utilize slots.
#
# cluster-slot-stats-enabled no

# Slot migrations using the CLUSTER MIGRATESLOTS command will generate an in-memory migration log on both
# the source and target nodes of the migration. These can be observed with CLUSTER GETSLOTMIGRATIONS.
# 'cluster-slot-migration-log-max-len' allows the maximum length of this log to be specified. Only
# migrations that are completed will be considered for removal. 
#
# cluster-slot-migration-log-max-len 1000

# During the CLUSTER MIGRATESLOTS command execution, the source node needs to pause itself and allow all
# writes to be fully processed by the target node. The amount of data remaining in the buffer on the
# source node when this pause happens will affect how long this pause takes.
#
# 'slot-migration-max-failover-repl-bytes' allows the pause to wait until there are at most this
# many bytes in the output buffer. Setting this to -1 will disable this limit, and 0 will require
# no data be in the source output buffer (although this is not a guarantee the data is fully
# received by the target).
#
# You can check the remaining buffer data size by examining the 'remaining_repl_size' field in the
# 'CLUSTER GETSLOTMIGRATIONS' command output on the source node.
#
# slot-migration-max-failover-repl-bytes 0

# In order to setup your cluster make sure to read the documentation
# available at https://valkey.io web site.

########################## CLUSTER DOCKER/NAT support  ########################

# In certain deployments, cluster node's address discovery fails, because
# addresses are NAT-ted or because ports are forwarded (the typical case is
# Docker and other containers).
#
# In order to make a cluster work in such environments, a static
# configuration where each node knows its public address is needed. The
# following options are used for this scope, and are:
#
# * cluster-announce-ip
# * cluster-announce-client-ipv4
# * cluster-announce-client-ipv6
# * cluster-announce-port
# * cluster-announce-tls-port
# * cluster-announce-bus-port
# * cluster-announce-client-port
# * cluster-announce-client-tls-port
#
# Each instructs the node about its address, possibly other addresses to expose
# to clients, client ports (for connections without and with TLS) and cluster
# message bus port. The information is then published in the bus packets so that
# other nodes will be able to correctly map the address of the node publishing
# the information.
#
# If tls-cluster is set to yes and cluster-announce-tls-port is omitted or set
# to zero, then cluster-announce-port refers to the TLS port. Note also that
# cluster-announce-tls-port has no effect if tls-cluster is set to no.
#
# If cluster-announce-client-ipv4 and cluster-announce-client-ipv6 are omitted,
# then cluster-announce-ip is exposed to clients.
#
# If the port that clients will use to connect to Valkey is different than
# the one other valkey nodes in the cluster will connect to it on, either
# through special networking rules or because Valkey is behind a load balancer,
# you can configure the port that clients will see by setting 
# cluster-announce-client-port or cluster-announce-client-tls-port.
#
# If the above options are not used, the normal cluster auto-detection
# will be used instead.
#
# Note that when remapped, the bus port may not be at the fixed offset of
# clients port + 10000, so you can specify any port and bus-port depending
# on how they get remapped. If the bus-port is not set, a fixed offset of
# 10000 will be used as usual.
#
# Example:
#
# cluster-announce-ip 10.1.1.5
# cluster-announce-client-ipv4 123.123.123.5
# cluster-announce-client-ipv6 2001:db8::8a2e:370:7334
# cluster-announce-tls-port 6379
# cluster-announce-port 0
# cluster-announce-bus-port 6380
# cluster-announce-client-tls-port 6479
# cluster-announce-client-port 0

# Set the number of databases in cluster mode. The default database is DB 0,
# you can select a different one on a per-connection basis using SELECT <dbid> where
# dbid is a number between 0 and 'cluster-databases'-1.
# cluster-databases 1

################################## COMMAND LOG ###################################

# The Command Log system is used to record commands that consume significant resources
# during server operation, including CPU, memory, and network bandwidth.
# These commands and the data they access may lead to abnormal instance operations,
# the commandlog can help users quickly and intuitively locate issues.
#
# Currently, three types of command logs are supported:
#
# SLOW: Logs commands that exceed a specified execution time. This excludes time spent
# on I/O operations like client communication and focuses solely on the command's
# processing time, where the main thread is blocked.
#
# LARGE-REQUEST: Logs commands with requests exceeding a defined size. This helps
# identify potentially problematic commands that send excessive data to the server.
#
# LARGE-REPLY: Logs commands that generate replies exceeding a defined size. This
# helps identify commands that return unusually large amounts of data, which may
# impact network performance or client processing.
#
# Each log type has two key parameters:
# 1. A threshold value that determines when a command is logged. This threshold is specific
#    to the type of log (e.g., execution time, request size, or reply size). A negative value disables
#    logging. A value of 0 logs all commands.
# 2. A maximum length that specifies the number of entries to retain in the log. Increasing
#    the length allows more entries to be stored but consumes additional memory. To clear all
#    entries for a specific log type and reclaim memory, use the `COMMANDLOG RESET`
#    subcommand followed by the log type.
#
# SLOW Command Logs
# The SLOW log records commands that exceed a specified execution time. The execution time
# does not include I/O operations, such as client communication or sending responses.
# It only measures the time spent executing the command, during which the thread is blocked
# and cannot handle other requests.
#
# The threshold is measured in microseconds.
#
# Backward Compatibility: The parameters `slowlog-log-slower-than` and `slowlog-max-len`
# are still supported but deprecated in favor of these commandlog parameters.
#
# The following time is expressed in microseconds, so 1000000 is equivalent to 1 second.
# Note that -1 disables the slow log, while 0 forces logging of every command.
commandlog-execution-slower-than 10000
# Record the number of commands.
# There is no limit to this length. Just be aware that it will consume memory.
# You can reclaim memory used by the slow log with SLOWLOG RESET or COMMANDLOG RESET SLOW.
commandlog-slow-execution-max-len 128
#
# LARGE_REQUEST Command Logs
# The LARGE_REQUEST log tracks commands with requests exceeding a specified size. The request size
# includes the command itself and all its arguments. For example, in `SET KEY VALUE`, the size is
# determined by the combined size of the key and value. Commands that consume excessive network
# bandwidth or query buffer space are recorded here.
#
# The threshold is measured in bytes.
# Note that -1 disables the large request log, while 0 forces logging of every command.
commandlog-request-larger-than 1048576
# Record the number of commands.
# There is no limit to this length. Just be aware that it will consume memory.
# You can reclaim memory used by the large request log with COMMANDLOG RESET LARGE-REQUEST.
commandlog-large-request-max-len 128
#
# LARGE_REPLY Command Logs
# The LARGE_REPLY log records commands that produce replies exceeding a specified size. These replies
# may consume significant network bandwidth or client output buffer space. Examples include commands
# like `KEYS` or `HGETALL` that return large datasets. Even a `GET` command may qualify if the value
# is substantial.
#
# The threshold is measured in bytes.
# Note that -1 disables the large reply log, while 0 forces logging of every command.
# Enabling this feature (values other than -1) has performance implications
# when I/O threads are used due to additional tracking overhead.
# Consider using -1 to disable if large reply monitoring is not needed.
commandlog-reply-larger-than 1048576
# Record the number of commands.
# There is no limit to this length. Just be aware that it will consume memory.
# You can reclaim memory used by the large reply log with COMMANDLOG RESET LARGE-REPLY.
commandlog-large-reply-max-len 128

################################ LATENCY MONITOR ##############################

# The server latency monitoring subsystem samples different operations
# at runtime in order to collect data related to possible sources of
# latency of a server instance.
#
# Via the LATENCY command this information is available to the user that can
# print graphs and obtain reports.
#
# The system only logs operations that were performed in a time equal or
# greater than the amount of milliseconds specified via the
# latency-monitor-threshold configuration directive. When its value is set
# to zero, the latency monitor is turned off.
#
# By default latency monitoring is disabled since it is mostly not needed
# if you don't have latency issues, and collecting data has a performance
# impact, that while very small, can be measured under big load. Latency
# monitoring can easily be enabled at runtime using the command
# "CONFIG SET latency-monitor-threshold <milliseconds>" if needed.
latency-monitor-threshold 0

################################ LATENCY TRACKING ##############################

# The server's extended latency monitoring tracks the per command latencies and enables
# exporting the percentile distribution via the INFO latencystats command,
# and cumulative latency distributions (histograms) via the LATENCY command.
#
# By default, the extended latency monitoring is enabled since the overhead
# of keeping track of the command latency is very small.
# latency-tracking yes

# By default the exported latency percentiles via the INFO latencystats command
# are the p50, p99, and p999.
# latency-tracking-info-percentiles 50 99 99.9

############################# EVENT NOTIFICATION ##############################

# The server can notify Pub/Sub clients about events happening in the key space.
# This feature is documented at https://valkey.io/topics/notifications
#
# For instance if keyspace events notification is enabled, and a client
# performs a DEL operation on key "foo" stored in the Database 0, two
# messages will be published via Pub/Sub:
#
# PUBLISH __keyspace@0__:foo del
# PUBLISH __keyevent@0__:del foo
#
# It is possible to select the events that the server will notify among a set
# of classes. Every class is identified by a single character:
#
#  K     Keyspace events, published with __keyspace@<db>__ prefix.
#  E     Keyevent events, published with __keyevent@<db>__ prefix.
#  g     Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ...
#  $     String commands
#  l     List commands
#  s     Set commands
#  h     Hash commands
#  z     Sorted set commands
#  x     Expired events (events generated every time a key expires)
#  e     Evicted events (events generated when a key is evicted for maxmemory)
#  n     New key events (Note: not included in the 'A' class)
#  t     Stream commands
#  d     Module key type events
#  m     Key-miss events (Note: It is not included in the 'A' class)
#  A     Alias for g$lshzxetd, so that the "AKE" string means all the events
#        (Except key-miss events which are excluded from 'A' due to their
#         unique nature).
#
#  The "notify-keyspace-events" takes as argument a string that is composed
#  of zero or multiple characters. The empty string means that notifications
#  are disabled.
#
#  Example: to enable list and generic events, from the point of view of the
#           event name, use:
#
#  notify-keyspace-events Elg
#
#  Example 2: to get the stream of the expired keys subscribing to channel
#             name __keyevent@0__:expired use:
#
#  notify-keyspace-events Ex
#
#  By default all notifications are disabled because most users don't need
#  this feature and the feature has some overhead. Note that if you don't
#  specify at least one of K or E, no events will be delivered.
notify-keyspace-events ""

############################### ADVANCED CONFIG ###############################

# Valkey uses listpacks for some small hashes, sets, sorted sets, and
# list nodes.
# A listpack is a compact, memory-efficient representation that stores multiple
# elements in a contiguous block of memory. This usually saves memory, but
# larger listpacks can make some updates or lookups more expensive because more
# data may need to be traversed or rewritten.
#
# The "*-max-listpack-entries" settings limit how many entries can stay in a
# listpack. The "*-max-listpack-value" settings limit the largest element,
# field, or value that can stay in a listpack.
#
# This section also includes related settings for list compression and for sets
# that can use intset encoding instead of listpacks.
#
# Change these only after measuring your actual dataset and workload.
#
# Hashes use listpacks when they have a small number of entries, and the
# biggest field or value does not exceed the following limits.
hash-max-listpack-entries 512
hash-max-listpack-value 64

# Lists are stored as quicklists, where each internal node is a listpack.
# The number of entries allowed per listpack node can be specified as a fixed
# maximum size or a maximum number of elements.
# For a fixed maximum size, use -5 through -1, meaning:
# -5: max size: 64 Kb  <-- not recommended for normal workloads
# -4: max size: 32 Kb  <-- not recommended
# -3: max size: 16 Kb  <-- probably not recommended
# -2: max size: 8 Kb   <-- good
# -1: max size: 4 Kb   <-- good
# Positive numbers mean store up to _exactly_ that number of elements
# per list node.
# The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),
# but if your use case is unique, adjust the settings as necessary.
list-max-listpack-size -2

# Lists may also be compressed.
# Compress depth is the number of quicklist nodes from *each* side of
# the list to *exclude* from compression.  The head and tail of the list
# are always uncompressed for fast push/pop operations.  Settings are:
# 0: disable all list compression
# 1: depth 1 means "don't start compressing until after 1 node into the list,
#    going from either the head or tail"
#    So: [head]->node->node->...->node->[tail]
#    [head], [tail] will always be uncompressed; inner nodes will compress.
# 2: [head]->[next]->node->node->...->node->[prev]->[tail]
#    2 here means: don't compress head or head->next or tail->prev or tail,
#    but compress all nodes between them.
# 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail]
# etc.
list-compress-depth 0

# Sets containing only integers can use intset encoding.
# The following setting limits the largest set that can use intset encoding.
set-max-intset-entries 512

# Sets containing non-integer values use listpacks when they have a small
# number of entries, and the biggest member does not exceed the following
# limits.
set-max-listpack-entries 128
set-max-listpack-value 64

# Sorted sets use listpacks when they have a small number of entries, and the
# biggest member does not exceed the following limits:
zset-max-listpack-entries 128
zset-max-listpack-value 64

# HyperLogLog sparse representation bytes limit. The limit includes the
# 16 bytes header. When a HyperLogLog using the sparse representation crosses
# this limit, it is converted into the dense representation.
#
# A value greater than 16000 is totally useless, since at that point the
# dense representation is more memory efficient.
#
# The suggested value is ~ 3000 in order to have the benefits of
# the space efficient encoding without slowing down too much PFADD,
# which is O(N) with the sparse encoding. The value can be raised to
# ~ 10000 when CPU is not a concern, but space is, and the data set is
# composed of many HyperLogLogs with cardinality in the 0 - 15000 range.
hll-sparse-max-bytes 3000

# Streams macro node max size / items. The stream data structure is a radix
# tree of big nodes that encode multiple items inside. Using this configuration
# it is possible to configure how big a single node can be in bytes, and the
# maximum number of items it may contain before switching to a new node when
# appending new stream entries. If any of the following settings are set to
# zero, the limit is ignored, so for instance it is possible to set just a
# max entries limit by setting max-bytes to 0 and max-entries to the desired
# value.
stream-node-max-bytes 4096
stream-node-max-entries 100

# Active rehashing uses 1% of the CPU time to help perform incremental rehashing
# of the main server hash tables, the ones mapping top-level keys to values.
#
# If active rehashing is disabled and rehashing is needed, a hash table is
# rehashed one "step" on every operation performed on the hash table (add, find,
# etc.), so if the server is idle, the rehashing may never complete and some
# more memory is used by the hash tables. Active rehashing helps prevent this.
#
# Active rehashing runs as a background task. Depending on the value of 'hz',
# the frequency at which the server performs background tasks, active rehashing
# can cause the server to freeze for a short time. For example, if 'hz' is set
# to 10, active rehashing runs for up to one millisecond every 100 milliseconds.
# If a freeze of one millisecond is not acceptable, you can increase 'hz' to let
# active rehashing run more often. If instead 'hz' is set to 100, active
# rehashing runs up to only 100 microseconds every 10 milliseconds. The total is
# still 1% of the time.
activerehashing yes

# The client output buffer limits can be used to force disconnection of clients
# that are not reading data from the server fast enough for some reason (a
# common reason is that a Pub/Sub client can't consume messages as fast as the
# publisher can produce them).
#
# The limit can be set differently for the three different classes of clients:
#
# normal -> normal clients including MONITOR clients
# replica -> replica clients
# pubsub -> clients subscribed to at least one pubsub channel or pattern
#
# The syntax of every client-output-buffer-limit directive is the following:
#
# client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds>
#
# A client is immediately disconnected once the hard limit is reached, or if
# the soft limit is reached and remains reached for the specified number of
# seconds (continuously).
# So for instance if the hard limit is 32 megabytes and the soft limit is
# 16 megabytes / 10 seconds, the client will get disconnected immediately
# if the size of the output buffers reach 32 megabytes, but will also get
# disconnected if the client reaches 16 megabytes and continuously overcomes
# the limit for 10 seconds.
#
# By default normal clients are not limited because they don't receive data
# without asking (in a push way), but just after a request, so only
# asynchronous clients may create a scenario where data is requested faster
# than it can read.
#
# Instead there is a default limit for pubsub and replica clients, since
# subscribers and replicas receive data in a push fashion.
#
# Note that it doesn't make sense to set the replica clients output buffer
# limit lower than the repl-backlog-size config (partial sync will succeed
# and then replica will get disconnected).
# Such a configuration is ignored (the size of repl-backlog-size will be used).
# This doesn't have memory consumption implications since the replica client
# will share the backlog buffers memory.
#
# Both the hard or the soft limit can be disabled by setting them to zero.
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit replica 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60

# Client query buffers accumulate new commands. They are limited to a fixed
# amount by default in order to avoid that a protocol desynchronization (for
# instance due to a bug in the client) will lead to unbound memory usage in
# the query buffer. However you can configure it here if you have very special
# needs, such as a command with huge argument, or huge multi/exec requests or alike.
#
# client-query-buffer-limit 1gb

# In some scenarios client connections can hog up memory leading to OOM
# errors or data eviction. To avoid this we can cap the accumulated memory
# used by all client connections (all pubsub and normal clients). Once we
# reach that limit connections will be dropped by the server freeing up
# memory. The server will attempt to drop the connections using the most
# memory first. We call this mechanism "client eviction".
#
# Client eviction is configured using the maxmemory-clients directive, which is
# 0 (disabled) by default, because it has a small performance impact under high
# load. It can be enabled at runtime when needed.
#
# A memory value can be used for the client eviction threshold,
# for example:
# maxmemory-clients 1g
#
# A percentage value (between 1% and 100%) means the client eviction threshold
# is based on a percentage of the maxmemory setting. For example to set client
# eviction at 5% of maxmemory:
# maxmemory-clients 5%
#
# maxmemory-clients 0

# In the server protocol, bulk requests, that are, elements representing single
# strings, are normally limited to 512 mb. However you can change this limit
# here, but must be 1mb or greater
#
# proto-max-bulk-len 512mb

# The server calls an internal function to perform many background tasks, like
# closing connections of clients in timeout, purging expired keys that are
# never requested, and so forth.
#
# Not all tasks are performed with the same frequency, but the server checks for
# tasks to perform according to the specified "hz" value.
#
# By default "hz" is set to 10. Raising the value will use more CPU when
# the server is idle, but at the same time will make the server more responsive when
# there are many keys expiring at the same time, and timeouts may be
# handled with more precision.
#
# The range is between 1 and 500, however a value over 100 is usually not
# a good idea. Most users should use the default of 10 and raise this up to
# 100 only in environments where very low latency is required.
hz 10

# When a child rewrites the AOF file, if the following option is enabled
# the file will be fsync-ed every 4 MB of data generated. This is useful
# in order to commit the file to the disk more incrementally and avoid
# big latency spikes.
aof-rewrite-incremental-fsync yes

# When the server saves RDB file, if the following option is enabled
# the file will be fsync-ed every 4 MB of data generated. This is useful
# in order to commit the file to the disk more incrementally and avoid
# big latency spikes.
rdb-save-incremental-fsync yes

# The server's LFU eviction (see maxmemory setting) can be tuned. However it is a good
# idea to start with the default settings and only change them after investigating
# how to improve the performances and how the keys LFU change over time, which
# is possible to inspect via the OBJECT FREQ command.
#
# There are two tunable parameters in the server LFU implementation: the
# counter logarithm factor and the counter decay time. It is important to
# understand what the two parameters mean before changing them.
#
# The LFU counter is just 8 bits per key, it's maximum value is 255, so the server
# uses a probabilistic increment with logarithmic behavior. Given the value
# of the old counter, when a key is accessed, the counter is incremented in
# this way:
#
# 1. A random number R between 0 and 1 is extracted.
# 2. A probability P is calculated as 1/(old_value*lfu_log_factor+1).
# 3. The counter is incremented only if R < P.
#
# The default lfu-log-factor is 10. This is a table of how the frequency
# counter changes with a different number of accesses with different
# logarithmic factors:
#
# +--------+------------+------------+------------+------------+------------+
# | factor | 100 hits   | 1000 hits  | 100K hits  | 1M hits    | 10M hits   |
# +--------+------------+------------+------------+------------+------------+
# | 0      | 104        | 255        | 255        | 255        | 255        |
# +--------+------------+------------+------------+------------+------------+
# | 1      | 18         | 49         | 255        | 255        | 255        |
# +--------+------------+------------+------------+------------+------------+
# | 10     | 10         | 18         | 142        | 255        | 255        |
# +--------+------------+------------+------------+------------+------------+
# | 100    | 8          | 11         | 49         | 143        | 255        |
# +--------+------------+------------+------------+------------+------------+
#
# NOTE: The above table was obtained by running the following commands:
#
#   valkey-benchmark -n 1000000 incr foo
#   valkey-cli object freq foo
#
# NOTE 2: The counter initial value is 5 in order to give new objects a chance
# to accumulate hits.
#
# The counter decay time is the time, in minutes, that must elapse in order
# for the key counter to be decremented.
#
# The default value for the lfu-decay-time is 1. A special value of 0 means we
# will never decay the counter.
#
# lfu-log-factor 10
# lfu-decay-time 1


# The maximum number of new client connections accepted per event-loop cycle. This configuration
# is set independently for TLS connections.
#
# By default, up to 10 new connection will be accepted per event-loop cycle for normal connections
# and up to 1 new connection per event-loop cycle for TLS connections.
#
# Adjusting this to a larger number can slightly improve efficiency for new connections
# at the risk of causing timeouts for regular commands on established connections.  It is
# not advised to change this without ensuring that all clients have limited connection
# pools and exponential backoff in the case of command/connection timeouts.
#
# If your application is establishing a large number of new connections per second you should
# also consider tuning the value of tcp-backlog, which allows the kernel to buffer more
# pending connections before dropping or rejecting connections.
#
# max-new-connections-per-cycle 10
# max-new-tls-connections-per-cycle 1

# Memory prefetching is used when multiple commands are parsed and ready for
# execution. We take advantage of knowing the next set of commands and prefetch
# their required hash table entries in a batch. This reduces the time spent on
# memory accesses.
#
# When I/O threads are used, the keys of multiple commands from multiple clients
# are prefetched together. When I/O threads are not used, only the commands from
# a single client's command pipeline is prefetched.
#
# The optimal batch size depends on the specific workflow of the user and on the
# hardware used. The default batch size is 16, which can be modified using the
# 'prefetch-batch-max-size' config.
#
# When the config is set to 0, prefetching is disabled.
#
# prefetch-batch-max-size 16

# It is possible to pin different threads and processes of the server to specific
# CPUs in your system, in order to maximize the performances of the server.
# This is useful both in order to pin different server threads in different
# CPUs, but also in order to make sure that multiple server instances running
# in the same host will be pinned to different CPUs.
#
# Normally you can do this using the "taskset" command, however it is also
# possible to do this via the server configuration directly, both in Linux and FreeBSD.
#
# You can pin the server/IO threads, bio threads, aof rewrite child process,
# bgsave child process and the slot migration process.
# The syntax to specify the cpu list is the same as the taskset command:
#
# Set server/io threads to cpu affinity 0,2,4,6:
# server-cpulist 0-7:2
#
# Set bio threads to cpu affinity 1,3:
# bio-cpulist 1,3
#
# Set aof rewrite child process to cpu affinity 8,9,10,11:
# aof-rewrite-cpulist 8-11
#
# Set bgsave (or slot migration) child process to cpu affinity 1,10,11:
# bgsave-cpulist 1,10-11

# In some cases the server will emit warnings and even refuse to start if it detects
# that the system is in bad state, it is possible to suppress these warnings
# by setting the following config which takes a space delimited list of warnings
# to suppress
#
# ignore-warnings ARM64-COW-BUG


########################### ACTIVE DEFRAGMENTATION #######################
#
# What is active defragmentation?
# -------------------------------
#
# Active (online) defragmentation allows a server to compact the
# spaces left between small allocations and deallocations of data in memory,
# thus allowing to reclaim back memory.
#
# Fragmentation is a natural process that happens with every allocator (but
# less so with Jemalloc, fortunately) and certain workloads. Normally a server
# restart is needed in order to lower the fragmentation, or at least to flush
# away all the data and create it again. However thanks to this feature, this
# process can happen at runtime in a "hot" way, while the server is running.
#
# Basically when the fragmentation is over a certain level (see the
# configuration options below) the server will start to create new copies of the
# values in contiguous memory regions by exploiting certain specific Jemalloc
# features (in order to understand if an allocation is causing fragmentation
# and to allocate it in a better place), and at the same time, will release the
# old copies of the data. This process, repeated incrementally for all the keys
# will cause the fragmentation to drop back to normal values.
#
# Important things to understand:
#
# 1. This feature is disabled by default, and only works if you compiled the server
#    to use the copy of Jemalloc we ship with the source code of the server.
#    This is the default with Linux builds.
#
# 2. You never need to enable this feature if you don't have fragmentation
#    issues.
#
# 3. Once you experience fragmentation, you can enable this feature when
#    needed with the command "CONFIG SET activedefrag yes".
#
# The configuration parameters are able to fine tune the behavior of the
# defragmentation process. If you are not sure about what they mean it is
# a good idea to leave the defaults untouched.

# Active defragmentation is disabled by default
# activedefrag no

# Minimum amount of fragmentation waste to start active defrag
# active-defrag-ignore-bytes 100mb

# Minimum percentage of fragmentation to start active defrag
# active-defrag-threshold-lower 10

# Maximum percentage of fragmentation at which we use maximum effort
# active-defrag-threshold-upper 100

# Minimal effort for defrag in CPU percentage, not cycle time as the name might
# suggest, to be used when the lower threshold is reached.
# active-defrag-cycle-min 1

# Maximal effort for defrag in CPU percentage, not cycle time as the name might
# suggest, to be used when the upper threshold is reached.
# active-defrag-cycle-max 25

# Maximum number of set/hash/zset/list fields that will be processed from
# the main dictionary scan
# active-defrag-max-scan-fields 1000

# The time spent (in microseconds) of the periodic active defrag process.  This
# affects the latency impact of active defrag on client commands.  Smaller numbers
# will result in less latency impact at the cost of increased defrag overhead.
# active-defrag-cycle-us 500

# Jemalloc background thread for purging will be enabled by default
jemalloc-bg-thread yes