Welcome to newb-x-mcbe discussions!

[devendrn]

@Jesusmendozaxxx Post your issue here

[Jesusmendozaxxx]

Okay, the error I encountered is the following. First, I copied all the source code correctly from the dev version 16.50 simply to implement a new end, but when modifying the horizon color and/or ambient light in the end, this happened: the color disappears and doesn't darken. 1.21.130

[devendrn]

Share your config.h file @Jesusmendozaxxx

[Jesusmendozaxxx]

My config.h file is fine, it's just that when I modify the end, the color doesn't change; instead, it reverts to the default vanilla color, the vanilla Minecraft terrain color, even though I'm on version 1.21.130.

And I'm going to upload my config.h file as a .zip because it doesn't seem to work as a .h file.
myconfig.zip

[devendrn]

@Jesusmendozaxxx Do you understand what you are doing? This is how it is supposed to look like based on your config values. If you want to change the ambient color on terrain, you should adjust NL_END_AMBIENT

[Jesusmendozaxxx]

Yes, that's what I did, as usual, but when I did that, at least with version 16.50, instead of changing the overall terrain color of the End, it just removed the color, essentially doing it in reverse. And that's something that theoretically didn't happen in the newbie version 16.0.

[devendrn]

change NL_END_AMBIENT to vec3(2.0, 0.0, 0.0) and show output @Jesusmendozaxxx

[Jesusmendozaxxx]

No, no, it's simply the entities that change color, not the terrain, at least on my device, and besides, the src folder is in good condition.

[devendrn]

@Jesusmendozaxxx I have tested this now. You will have to increase the intensity of ambient color (above 10.0) if you want to change the color. In new lighting system, the effect of ambient light color is very minimal. Most of the lighting is from sky color.

[Jesusmendozaxxx]

Oh really? Can you send me some screenshots so I can be sure? I hadn't noticed that.