Merge pull request #34 from elkoDev/develop

Merge develop into main

Author: elkoDev

TcAutomation/TWINCAT_SETUP.md

@@ -40,9 +40,9 @@ TwinCAT requires a valid license to run. For development and testing purposes, y
 
 **Note:** The 7-day trial license needs to be renewed after expiration. You can renew it by repeating the process above.
 
-## 4 Hyper-V Compatibility Issue
+## 4 Windows Compatibility Issues
 
-TwinCAT requires direct hardware access and **does not work with Hyper-V enabled**. If you're running Windows with Hyper-V or WSL2, you need to disable it.
+TwinCAT requires direct hardware access and is incompatible with certain Windows security and virtualization features. Both **Hyper-V** and **Core Isolation** must be disabled.
 
 ### 4.1 Disable Windows Core Isolation (Memory Integrity)
 
@@ -53,7 +53,6 @@ Windows Core Isolation with Memory Integrity can interfere with TwinCAT. You nee
 3. Turn off **Memory Integrity**
 4. Restart your computer
 
-
 ### 4.2 Solution: Dual Boot Configuration
 
 Instead of permanently disabling Hyper-V, you can create a dual boot option that allows you to choose whether to boot Windows with or without Hyper-V.
@@ -115,4 +114,4 @@ After setup, verify that TwinCAT is correctly installed:
 
 1. Open TwinCAT XAE (Visual Studio Shell)
 2. Check that TwinCAT system tray icon appears (orange/blue)
-3. Switch to Config Mode and then Run Mode to verify functionality
+3. Switch to Config Mode and then Run Mode to verify functionality

language/README.md

@@ -88,10 +88,13 @@ Currently the following target platforms are supported:
 
 #### 3.3.1 Beckhoff
 
+The end-to-end deployment has been validated on a **CX8190** with the following KBus terminals: KL1002, KL2622, KL3044, KL4004, KL9010. Other CX controllers and KBus terminals are modelled in the code but have not been tested.
+
 In addition to the standard libraries provided by Beckhoff, the following libraries are supported:
 
 - `Tc3_DALI`: Please note that this library integration is not fully tested.
 
+
 ## 4 Future Work
 
 - Add support for more target platforms (e.g., Siemens, Codesys)