Status: supported now.
This path uses the custom Patternflow KiCad PCB in hardware/pcb/, populated by hand. It is the most polished electronics path currently documented.
- Order the Patternflow PCB from the KiCad/Gerber files.
- Hand-solder the SMD passives and through-hole parts.
- Mount the ESP32-S3 module on female headers.
- Wire the LED matrix and power-bank input through the PCB terminals.
The custom PCB path pairs with the current 3D printed enclosure.
| File | Purpose |
|---|---|
hardware/pcb/kicad/ |
Editable KiCad source |
hardware/pcb/gerber/patternflow_v2.0_gerber.zip |
Current production Gerber |
hardware/pcb/schematic.pdf |
Schematic PDF |
For the exact BOM, soldering order, wiring, and first boot checks, follow the current detailed guide:
A breadboard / jumper-wire electronics path is planned. It will use the same core parts and firmware, but will not require ordering the PCB.