New monitor is not created through xrandr

[nsrCodes]

When I press n in the menu I get the following output

X Error of failed request:  BadName (named color or font does not exist)
  Major opcode of failed request:  140 (RANDR)
  Minor opcode of failed request:  16 (RRCreateMode)
  Serial number of failed request:  40
  Current serial number in output stream:  40
xrandr: cannot find output "VIRTUAL1"
warning: output VIRTUAL1 not found; ignoring
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1920x1080    120.04 +  48.01* 
HDMI-1-0 disconnected
  2128x1080_60.00 (0x8ed) 192.120MHz -HSync +VSync
        h: width  2128 start 2264 end 2496 total 2864 skew    0 clock  67.08KHz
        v: height 1080 start 1081 end 1084 total 1118           clock  60.00Hz

But still after I press enter the menu shows that new monitor is created. I found when I was stuck in the issue #4 .
Can someone help?

[OscarPerez79]

You should replace the screen name in the script from "VIRTUAL1" to "HDMI-1-0"

[MajliTech]

For me it didn't work

X Error of failed request:  BadName (named color or font does not exist)
  Major opcode of failed request:  140 (RANDR)
  Minor opcode of failed request:  16 (RRCreateMode)
  Serial number of failed request:  31
  Current serial number in output stream:  31
xrandr: cannot find output "HDMI-1-0"
warning: output HDMI-1-0 not found; ignoring
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 382mm x 215mm
   1920x1080     60.00*+  40.00  
   1680x1050     60.00  
   1280x1024     60.00  
   1440x900      60.00  
   1280x800      60.00  
   1280x720      60.00  
   1024x768      60.00  
   800x600       60.00  
   640x480       60.00  
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
  1280x800_60.00 (0x6c4) 83.460MHz -HSync +VSync
        h: width  1280 start 1344 end 1480 total 1680 skew    0 clock  49.68KHz
        v: height  800 start  801 end  804 total  828           clock  60.00Hz

[dalae6763]

Can you tell me more about the connection through usb?