Skip to content

Update pre-commit hook zricethezav/gitleaks to v8.28.0#794

Merged
renovate[bot] merged 1 commit into
mainfrom
renovate/all-minor
Jul 29, 2025
Merged

Update pre-commit hook zricethezav/gitleaks to v8.28.0#794
renovate[bot] merged 1 commit into
mainfrom
renovate/all-minor

Conversation

@renovate

@renovate renovate Bot commented Jul 29, 2025

Copy link
Copy Markdown
Contributor

This PR contains the following updates:

Package Type Update Change
zricethezav/gitleaks repository minor v8.21.2 -> v8.28.0

Note: The pre-commit manager in Renovate is not supported by the pre-commit maintainers or community. Please do not report any problems there, instead create a Discussion in the Renovate repository if you have any questions.

Release Notes

zricethezav/gitleaks (zricethezav/gitleaks)

v8.28.0

Compare Source

Changelog

Optimizations

#​1909 waits to find newlines until a match. This ends up saving a boat load of time since before we were finding newlines for every fragment regardless if a rule matched or not.
#​1908 promoted @​rgmz excellent stopword optimization

Composite Rules (Multi-part or required Rules) #​1905

In v8.28.0 Gitleaks introduced composite rules, which are made up of a single "primary" rule and one or more auxiliary or required rules. To create a composite rule, add a [[rules.required]] table to the primary rule specifying an id and optionally withinLines and/or withinColumns proximity constraints. A fragment is a chunk of content that Gitleaks processes at once (typically a file, part of a file, or git diff), and proximity matching instructs the primary rule to only report a finding if the auxiliary required rules also find matches within the specified area of the fragment.

Proximity matching: Using the withinLines and withinColumns fields instructs the primary rule to only report a finding if the auxiliary required rules also find matches within the specified proximity. You can set:

  • withinLines: N - required findings must be within N lines (vertically)
  • withinColumns: N - required findings must be within N characters (horizontally)
  • Both - creates a rectangular search area (both constraints must be satisfied)
  • Neither - fragment-level matching (required findings can be anywhere in the same fragment)

Here are diagrams illustrating each proximity behavior:

p = primary captured secret
a = auxiliary (required) captured secret
fragment = section of data gitleaks is looking at

    *Fragment-level proximity*               
    Any required finding in the fragment
          ┌────────┐                       
   ┌──────┤fragment├─────┐                 
   │      └──────┬─┤     │ ┌───────┐       
   │             │a│◀────┼─│✓ MATCH│       
   │          ┌─┐└─┘     │ └───────┘       
   │┌─┐       │p│        │                 
   ││a│    ┌─┐└─┘        │ ┌───────┐       
   │└─┘    │a│◀──────────┼─│✓ MATCH│       
   └─▲─────┴─┴───────────┘ └───────┘       
     │    ┌───────┐                        
     └────│✓ MATCH│                        
          └───────┘                        
                                           
                                           
   *Column bounded proximity*
   `withinColumns = 3`                    
          ┌────────┐                       
   ┌────┬─┤fragment├─┬───┐                 
   │      └──────┬─┤     │ ┌───────────┐   
   │    │        │a│◀┼───┼─│+1C ✓ MATCH│   
   │          ┌─┐└─┘     │ └───────────┘   
   │┌─┐ │     │p│    │   │                 
┌──▶│a│  ┌─┐  └─┘        │ ┌───────────┐   
│  │└─┘ ││a│◀────────┼───┼─│-2C ✓ MATCH│   
│  │       ┘             │ └───────────┘   
│  └── -3C ───0C─── +3C ─┘                 
│  ┌─────────┐                             
│  │ -4C ✗ NO│                             
└──│  MATCH  │                             
   └─────────┘                             
                                           
                                           
   *Line bounded proximity*
   `withinLines = 4`                      
         ┌────────┐                        
   ┌─────┤fragment├─────┐                  
  +4L─ ─ ┴────────┘─ ─ ─│                  
   │                    │                  
   │              ┌─┐   │ ┌────────────┐   
   │         ┌─┐  │a│◀──┼─│+1L ✓ MATCH │   
   0L  ┌─┐   │p│  └─┘   │ ├────────────┤   
   │   │a│◀──┴─┴────────┼─│-1L ✓ MATCH │   
   │   └─┘              │ └────────────┘   
   │                    │ ┌─────────┐      
  -4L─ ─ ─ ─ ─ ─ ─ ─┌─┐─│ │-5L ✗ NO │      
   │                │a│◀┼─│  MATCH  │      
   └────────────────┴─┴─┘ └─────────┘      
                                           
                                           
   *Line and column bounded proximity*
   `withinLines = 4`                      
   `withinColumns = 3`                    
         ┌────────┐                        
   ┌─────┤fragment├─────┐                  
  +4L   ┌└────────┴ ┐   │                  
   │            ┌─┐     │ ┌───────────────┐
   │    │       │a│◀┼───┼─│+2L/+1C ✓ MATCH│
   │         ┌─┐└─┘     │ └───────────────┘
   0L   │    │p│    │   │                  
   │         └─┘        │                  
   │    │           │   │ ┌────────────┐   
  -4L    ─ ─ ─ ─ ─ ─┌─┐ │ │-5L/+3C ✗ NO│   
   │                │a│◀┼─│   MATCH    │   
   └───-3C────0L───+3C┴─┘ └────────────┘

v8.27.2

Compare Source

Changelog

v8.27.1

Compare Source

Changelog

v8.27.0

Compare Source

Changelog

Got another @​bplaxco release. Cheers!

Archive Scanning

Sometimes secrets are packaged within archive files like zip files or tarballs,
making them difficult to discover. Now you can tell gitleaks to automatically
extract and scan the contents of archives. The flag --max-archive-depth
enables this feature for both dir and git scan types. The default value of
"0" means this feature is disabled by default.

Recursive scanning is supported since archives can also contain other archives.
The --max-archive-depth flag sets the recursion limit. Recursion stops when
there are no new archives to extract, so setting a very high max depth just
sets the potential to go that deep. It will only go as deep as it needs to.

The findings for secrets located within an archive will include the path to the
file inside the archive. Inner paths are separated with !.

Example finding (shortened for brevity):

Finding:     DB_PASSWORD=8ae31cacf141669ddfb5da
...
File:        testdata/archives/nested.tar.gz!archives/files.tar!files/.env.prod
Line:        4
Commit:      6e6ee6596d337bb656496425fb98644eb62b4a82
...
Fingerprint: 6e6ee6596d337bb656496425fb98644eb62b4a82:testdata/archives/nested.tar.gz!archives/files.tar!files/.env.prod:generic-api-key:4
Link:        https://github.com/leaktk/gitleaks/blob/6e6ee6596d337bb656496425fb98644eb62b4a82/testdata/archives/nested.tar.gz

This means a secret was detected on line 4 of files/.env.prod. which is in
archives/files.tar which is in testdata/archives/nested.tar.gz.

Currently supported formats:

The compression
and archive
formats supported by mholt's archives package
are supported.

v8.26.0

Compare Source

Changelog

Calling this one @​bplaxco's release as he introduced a really clever method for mixed decoding without sacrificing too much performance. As I stated in his PR, I think he's either a wizard or some time traveling AI. Dude is wicked smaht

Anyways, Gitleaks now supports the following decoders: hex, percent(url enconding), and b64. It's relatively straight forward to add a new decoder so if you're motivated, community contributions are welcomed!

Here's an example:

~/code/gitleaks-org/gitleaks (master) cat decode.txt
text below
aGVsbG8sIHdvcmxkIQ%3D%3D%0A
text above
~/code/gitleaks-org/gitleaks (master) ./gitleaks dir decode.txt --max-decode-depth=2 --log-level=debug

    ○
    │╲
    │ ○
    ○ ░
    ░    gitleaks

4:08PM DBG using stdlib regex engine
4:08PM DBG unable to load gitleaks config from decode.txt/.gitleaks.toml since --source=decode.txt is a file, using default config
4:08PM DBG found .gitleaksignore file: .gitleaksignore
4:08PM DBG segment found: original=[29,38] pos=[29,38]: "%3D%3D%0A" -> "==\n"
4:08PM DBG segment found: original=[11,38] pos=[11,31]: "aGVsbG8sIHdvcmxkIQ==" -> "hello, world!"
4:08PM INF scanned ~50 bytes (50 bytes) in 1.5ms
4:08PM INF no leaks found

v8.25.1

Compare Source

Changelog

Big thanks @​rgmz

v8.25.0

Compare Source

Changelog

v8.24.3

Compare Source

Changelog

v8.24.2

Compare Source

What's Changed

New Contributors

Full Changelog: gitleaks/gitleaks@v8.24.0...v8.24.2

v8.24.1

Compare Source

v8.24.0

Compare Source

Changelog

v8.23.3

Compare Source

Changelog

v8.23.2

Compare Source

Changelog

v8.23.1

Compare Source

Changelog

v8.23.0

Compare Source

Changelog

READ THIS!!! The default gitleaks config now uses [[rules.allowlists]]

### ⚠️ In v8.21.0 `[rules.allowlist]` was replaced with `[[rules.allowlists]]`.
### This change was backwards-compatible: instances of `[rules.allowlist]` still  work.
    #

### You can define multiple allowlists for a rule to reduce false positives.
### A finding will be ignored if _ANY_ `[[rules.allowlists]]` matches.
    [[rules.allowlists]]
    description = "ignore commit A"

### When multiple criteria are defined the default condition is "OR".
### e.g., this can match on |commits| OR |paths| OR |stopwords|.
    condition = "OR"
    commits = [ "commit-A", "commit-B"]
    paths = [
      '''go\.mod''',
      '''go\.sum'''
    ]

### note: stopwords targets the extracted secret, not the entire regex match
### like 'regexes' does. (stopwords introduced in 8.8.0)
    stopwords = [
      '''client''',
      '''endpoint''',
    ]

    [[rules.allowlists]]

### The "AND" condition can be used to make sure all criteria match.
### e.g., this matches if |regexes| AND |paths| are satisfied.
    condition = "AND"

### note: |regexes| defaults to check the _Secret_ in the finding.
### Acceptable values for |regexTarget| are "secret" (default), "match", and "line".
    regexTarget = "match"
    regexes = [ '''(?i)parseur[il]''' ]
    paths = [ '''package-lock\.json''' ]

v8.22.1

Compare Source

Changelog

v8.22.0

Compare Source

Changelog

This bumps the gitleaks binary size from around 8.5MB to 15MB but yields 2-4x speedup. Worth it imo. If you feel strongly against this change feel free to open an issue where we can discuss the tradeoffs in more depth. Credit to @​ahrav

v8.21.4

Compare Source

Changelog

v8.21.3

Compare Source

Changelog

Configuration

📅 Schedule: Branch creation - "after 5pm every weekday,before 8am every weekday,every weekend" in timezone America/Chicago, Automerge - At any time (no schedule defined).

🚦 Automerge: Enabled.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

  • If you want to rebase/retry this PR, check this box

This PR was generated by Mend Renovate. View the repository job log.

@renovate renovate Bot added dependencies Pull requests that update a dependency file renovate labels Jul 29, 2025
@renovate renovate Bot merged commit 2d38cc0 into main Jul 29, 2025
13 checks passed
@renovate renovate Bot deleted the renovate/all-minor branch July 29, 2025 05:24
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

@tomwillis608 tomwillis608 tomwillis608 approved these changes
@renovate-approve renovate-approve[bot] renovate-approve[bot] approved these changes

Assignees

No one assigned

Labels

dependencies Pull requests that update a dependency file renovate

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

1 participant

@tomwillis608