bch: add G3a populated-block gate entrypoint (test-only; CI wiring follows separately)

tests/gates/bch_g3a_regtest_block_production.sh

@@ -0,0 +1,79 @@
+#!/usr/bin/env bash
+# G3a — BCH populated block production (CI required-gate entrypoint).
+# Default arm (CI-runner, network-free): the c2pool-bch in-process CHECK-harnesses
+# that together prove POPULATED-block production without a live BCHN node —
+#   bch_embedded_daemon_assembly_test  : EmbeddedDaemon assembles the block from its
+#                                        own real EmbeddedCoinNode seam (coinbase +
+#                                        ABLA-bounded template), embedded-primary.
+#   bch_embedded_block_broadcast_test  : the won block reaches the network on BOTH
+#                                        paths (embedded P2P + submitblock fallback).
+#   bch_block_ordering_test            : CTOR canonical tx ordering (A3).
+#   bch_cashtokens_transparency_test   : CashTokens FT/NFT genesis+transfer carried
+#                                        transparently through the template (A5).
+#   bch_coinbase_kat_bytevector_test   : coinbase byte-vector KAT — no witness
+#                                        commitment, standalone SHA256d (A1/A2).
+# Optional live arm (opt-in when BCH_RPC_PASS + BCH_RPC_AUTH are set): additionally
+# drives scripts/bch_g3a_populated_block_regtest.py against an isolated regtest BCHN
+# (v29.0.0, --disable-wallet) for a real end-to-end populated block — the full A1–A7
+# attestation (produced block 5fa6e22b…; CashTokens FT/NFT/transfer, P2SH32, CTOR,
+# merkle, no-witness, 30-in consolidation) via the submitblock RPC arm.
+# Deterministic: exit 0 = pass; nonzero = failure / hollow run. Fenced: tests/gates/
+# entrypoint over existing COIN_BCH targets — no consensus / shared-base / build.yml /
+# CMake / other-coin surface.
+set -euo pipefail
+
+GATE="G3a bch-populated-block-production"
+TEST_REGEX='^bch_(embedded_daemon_assembly_test|embedded_block_broadcast_test|block_ordering_test|cashtokens_transparency_test|coinbase_kat_bytevector_test)$'
+TARGETS=(bch_embedded_daemon_assembly_test bch_embedded_block_broadcast_test \
+         bch_block_ordering_test bch_cashtokens_transparency_test \
+         bch_coinbase_kat_bytevector_test)
+
+REPO_ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/../.." && pwd)"
+# COIN_BCH targets compile ONLY under -DCOIN_BCH=ON, so default to the CI build_bch
+# tree; override BUILD_DIR to reuse a warm cache.
+BUILD_DIR="${BUILD_DIR:-$REPO_ROOT/build_bch}"
+
+# 1. Ensure the targets exist (configure+build only if the CI cache is cold).
+if [ ! -f "$BUILD_DIR/CMakeCache.txt" ]; then
+  echo "[$GATE] no build dir at $BUILD_DIR — configuring (conan + cmake -DCOIN_BCH=ON)"
+  conan install "$REPO_ROOT" --build=missing --output-folder="$BUILD_DIR" --settings=build_type=Release
+  cmake -S "$REPO_ROOT" -B "$BUILD_DIR" \
+    -DCMAKE_TOOLCHAIN_FILE="$BUILD_DIR/conan_toolchain.cmake" \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCOIN_BCH=ON
+fi
+cmake --build "$BUILD_DIR" --target "${TARGETS[@]}" -j"$(nproc)"
+
+# 2. Run from build/ and capture (false-green trap: wrong CWD prints
+#    "No tests were found!!!" and EXITS 0).
+set +e
+OUT="$(cd "$BUILD_DIR" && ctest -R "$TEST_REGEX" --output-on-failure 2>&1)"
+RC=$?
+set -e
+echo "$OUT"
+
+# 3. False-green guard: demand a positive test count actually ran, and that the
+#    full expected set matched (a partial regex miss must not read as green).
+if grep -q "No tests were found" <<<"$OUT"; then
+  echo "[$GATE] FAIL — hollow run: 0 tests matched $TEST_REGEX" >&2
+  exit 1
+fi
+N="$(grep -oE 'out of [0-9]+' <<<"$OUT" | grep -oE '[0-9]+' | tail -1)"
+if [ -z "${N:-}" ] || [ "$N" -lt "${#TARGETS[@]}" ]; then
+  echo "[$GATE] FAIL — expected ${#TARGETS[@]} tests, matched ${N:-0}" >&2
+  exit 1
+fi
+if [ "$RC" -ne 0 ]; then
+  echo "[$GATE] FAIL — ctest exit $RC ($N tests)" >&2
+  exit "$RC"
+fi
+echo "[$GATE] PASS (CI arm) — $N populated-block assembly / broadcast / CTOR / CashTokens / coinbase-KAT assertions green"
+
+# 4. Optional live regtest arm — only when an isolated BCHN is wired in via env.
+if [ -n "${BCH_RPC_PASS:-}" ] && [ -n "${BCH_RPC_AUTH:-}" ]; then
+  echo "[$GATE] live arm: driving scripts/bch_g3a_populated_block_regtest.py"
+  python3 "$REPO_ROOT/scripts/bch_g3a_populated_block_regtest.py"
+  echo "[$GATE] PASS (live arm) — populated regtest block proven via isolated BCHN submitblock (A1–A7)"
+else
+  echo "[$GATE] live regtest arm SKIPPED (set BCH_RPC_PASS + BCH_RPC_AUTH to enable)"
+fi