Update filter default settings

Author: fweig

GPU/GPUTracking/Definitions/GPUSettingsList.h

@@ -113,8 +113,8 @@ AddOptionRTC(maxTimeBinAboveThresholdIn1000Bin, uint16_t, 500, "", 0, "Except pa
 AddOptionRTC(maxConsecTimeBinAboveThreshold, uint16_t, 200, "", 0, "Except pad from cluster finding if number of consecutive charges in a fragment is above this baseline (disable = 0)")
 AddOptionRTC(noisyPadSaturationThreshold, uint16_t, 700, "", 0, "Threshold where a timebin is considered saturated, disabling the noisy pad check for that pad")
 AddOptionRTC(hipTailFilter, uint8_t, 0, "", 0, "Enable Highly Ionising Particle tail filter in CheckPadBaseline (0 = disable, 1 = filter tails)")
-AddOptionRTC(hipTailFilterThreshold, uint16_t, 150, "", 0, "Threshold that must be exceeded for a timebin to be counted towards Highly Ionising Particle tail")
-AddOptionRTC(hipTailFilterAlpha, float, 0.25f, "", 0, "Smoothing factor for the exponential Highly Ionising Particle tail filter")
+AddOptionRTC(hipTailFilterThreshold, uint16_t, 100, "", 0, "Threshold that must be exceeded for a timebin to be counted towards Highly Ionising Particle tail")
+AddOptionRTC(hipTailFilterAlpha, float, 0.5f, "", 0, "Smoothing factor for the exponential Highly Ionising Particle tail filter")
 AddOptionRTC(occupancyMapTimeBins, uint16_t, 16, "", 0, "Number of timebins per histogram bin of occupancy map (0 = disable occupancy map)")
 AddOptionRTC(occupancyMapTimeBinsAverage, uint16_t, 0, "", 0, "Number of timebins +/- to use for the averaging")
 AddOptionRTC(trackFitCovLimit, uint16_t, 1000, "", 0, "Abort fit when y/z cov exceed the limit")