Support controlled multi-install for safe AI agent integrations

docs/reference/integrations.md

@@ -42,6 +42,8 @@ specify integration list
 ```
 
 Shows all available integrations, which one is currently installed, and whether each requires a CLI tool or is IDE-based.
+When multiple integrations are installed, the list marks the default integration separately from the other installed integrations.
+The list also shows whether each built-in integration is declared multi-install safe.
 
 ## Install an Integration
 
@@ -52,9 +54,12 @@ specify integration install <key>
 | Option                   | Description                                                              |
 | ------------------------ | ------------------------------------------------------------------------ |
 | `--script sh\|ps`        | Script type: `sh` (bash/zsh) or `ps` (PowerShell)                        |
+| `--force`                | Opt in to installing alongside integrations that are not declared multi-install safe |
 | `--integration-options`  | Integration-specific options (e.g. `--integration-options="--commands-dir .myagent/cmds"`) |
 
-Installs the specified integration into the current project. Fails if another integration is already installed — use `switch` instead. If the installation fails partway through, it automatically rolls back to a clean state.
+Installs the specified integration into the current project. If another integration is already installed, the command only proceeds automatically when all involved integrations are declared multi-install safe. Otherwise, use `switch` to replace the default integration or pass `--force` to explicitly opt in to multi-install. If the installation fails partway through, it automatically rolls back to a clean state.
+
+Installing an additional integration does not change the default integration. Use `specify integration use <key>` to change the default.
 
 > **Note:** All integration management commands require a project already initialized with `specify init`. To start a new project with a specific agent, use `specify init <project> --integration <key>` instead.
 
@@ -83,10 +88,22 @@ specify integration switch <key>
 | Option                   | Description                                                              |
 | ------------------------ | ------------------------------------------------------------------------ |
 | `--script sh\|ps`        | Script type: `sh` (bash/zsh) or `ps` (PowerShell)                        |
-| `--force`                | Force removal of modified files during uninstall                         |
+| `--force`                | Force removal of modified files during uninstall; when the target is already installed, overwrite managed shared templates while changing the default |
 | `--integration-options`  | Options for the target integration                                       |
 
-Equivalent to running `uninstall` followed by `install` in a single step.
+If the target integration is not already installed, equivalent to running `uninstall` followed by `install` in a single step. In this mode, `--force` controls whether modified files from the removed integration are deleted. If the target integration is already installed, `switch` only changes the default integration, like `use`; in this mode, `--force` controls whether managed shared templates are overwritten while the default changes.
+
+## Use an Installed Integration
+
+```bash
+specify integration use <key>
+```
+
+| Option    | Description                                         |
+| --------- | --------------------------------------------------- |
+| `--force` | Overwrite managed shared templates while changing the default |
+
+Sets the default integration without uninstalling any other installed integrations. This also refreshes managed shared templates so command references match the new default integration's invocation style. Modified or untracked shared templates are preserved unless `--force` is used.
 
 ## Upgrade an Integration
 
@@ -100,7 +117,7 @@ specify integration upgrade [<key>]
 | `--script sh\|ps`        | Script type: `sh` (bash/zsh) or `ps` (PowerShell)                        |
 | `--integration-options`  | Options for the integration                                              |
 
-Reinstalls the current integration with updated templates and commands (e.g., after upgrading Spec Kit). Defaults to the currently installed integration; if a key is provided, it must match the installed one — otherwise the command fails and suggests using `switch` instead. Detects locally modified files and blocks the upgrade unless `--force` is used. Stale files from the previous install that are no longer needed are removed automatically.
+Reinstalls an installed integration with updated templates and commands (e.g., after upgrading Spec Kit). Defaults to the default integration; if a key is provided, it must be one of the installed integrations. Detects locally modified files and blocks the upgrade unless `--force` is used. Stale files from the previous install that are no longer needed are removed automatically. Shared templates stay aligned with the default integration even when upgrading a non-default integration.
 
 ## Integration-Specific Options
 
@@ -119,9 +136,39 @@ specify integration install generic --integration-options="--commands-dir .myage
 
 ## FAQ
 
-### Can I use multiple integrations at the same time?
+### Can I install multiple integrations in the same project?
+
+Yes, but it is intended for team portability rather than the default workflow. Multiple integrations are allowed automatically only when the installed integration and the new integration are declared multi-install safe by Spec Kit. For other combinations, pass `--force` to acknowledge that multiple agents may see unrelated agent-specific instructions or commands.
+
+Spec Kit tracks one default integration in `.specify/integration.json` with `default_integration`, all installed integrations with `installed_integrations`, per-integration runtime settings with `integration_settings`, and a dedicated `integration_state_schema` for future state migrations. The legacy `integration` field remains as an alias for the default integration.
+
+### Which integrations are multi-install safe?
+
+An integration is multi-install safe when it uses isolated agent directories, a dedicated context file that does not collide with another safe integration, stable command invocation settings, and a separate install manifest. Shared Spec Kit templates remain aligned to the single default integration.
+
+The currently declared multi-install safe integrations are:
+
+| Key | Isolation |
+| --- | --------- |
+| `auggie` | `.augment/commands`, `.augment/rules/specify-rules.md` |
+| `claude` | `.claude/skills`, `CLAUDE.md` |
+| `codebuddy` | `.codebuddy/commands`, `CODEBUDDY.md` |
+| `codex` | `.agents/skills`, `AGENTS.md` |
+| `cursor-agent` | `.cursor/skills`, `.cursor/rules/specify-rules.mdc` |
+| `gemini` | `.gemini/commands`, `GEMINI.md` |
+| `iflow` | `.iflow/commands`, `IFLOW.md` |
+| `junie` | `.junie/commands`, `.junie/AGENTS.md` |
+| `kilocode` | `.kilocode/workflows`, `.kilocode/rules/specify-rules.md` |
+| `kimi` | `.kimi/skills`, `KIMI.md` |
+| `qodercli` | `.qoder/commands`, `QODER.md` |
+| `qwen` | `.qwen/commands`, `QWEN.md` |
+| `roo` | `.roo/commands`, `.roo/rules/specify-rules.md` |
+| `shai` | `.shai/commands`, `SHAI.md` |
+| `tabnine` | `.tabnine/agent/commands`, `TABNINE.md` |
+| `trae` | `.trae/skills`, `.trae/rules/project_rules.md` |
+| `windsurf` | `.windsurf/workflows`, `.windsurf/rules/specify-rules.md` |
 
-No. Only one AI coding agent integration can be installed per project. Use `specify integration switch <key>` to change to a different AI coding agent.
+Integrations that share a context file or command directory with another integration, require dynamic install paths such as `--commands-dir`, or merge shared tool settings are not declared safe by default. They can still be installed alongside another integration with `--force`.
 
 ### What happens to my changes when I uninstall or switch?
 
@@ -137,4 +184,4 @@ CLI-based integrations (like Claude Code, Gemini CLI) require the tool to be ins
 
 ### When should I use `upgrade` vs `switch`?
 
-Use `upgrade` when you've upgraded Spec Kit and want to refresh the same integration's templates. Use `switch` when you want to change to a different AI coding agent.
+Use `upgrade` when you've upgraded Spec Kit and want to refresh an installed integration's managed files. Use `switch` when you want to replace the current default with another integration; if the target is already installed, `switch` behaves like `use`.