firmware: rename hackrf_core.x to pins.x

Author: antoinevg

firmware/blinky/blinky.c

@@ -20,15 +20,15 @@
  */
 
 #include "delay.h"
-#include "hackrf_core.h"
 #include "leds.h"
+#include "pins.h"
 #include "platform_detect.h"
 #include "power.h"
 
 int main(void)
 {
 	detect_hardware_platform();
-	pin_setup();
+	pins_setup();
 
 #ifndef PRALINE
 	/* enable 1V8 power supply so that the 1V8 LED lights up */

firmware/common/hackrf_core.c firmware/common/pins.cfirmware/common/hackrf_core.c renamed to firmware/common/pins.c

@@ -21,7 +21,7 @@
  * Boston, MA 02110-1301, USA.
  */
 
-#include "hackrf_core.h"
+#include "pins.h"
 
 #include <libopencm3/lpc43xx/scu.h>
 #include <libopencm3/lpc43xx/ssp.h>
@@ -42,7 +42,7 @@
 	#include "fpga.h"
 #endif
 
-void pin_shutdown(void)
+void pins_shutdown(void)
 {
 	const platform_gpio_t* gpio = platform_gpio();
 	const platform_scu_t* scu = platform_scu();
@@ -182,8 +182,8 @@ void pin_shutdown(void)
 	SCU_SFSI2C0 = SCU_I2C0_NOMINAL;
 }
 
-/* Run after pin_shutdown() and prior to enabling power supplies. */
-void pin_setup(void)
+/* Run after pins_shutdown() and prior to enabling power supplies. */
+void pins_setup(void)
 {
 	const platform_gpio_t* gpio = platform_gpio();
 	const platform_scu_t* scu = platform_scu();

firmware/common/hackrf_core.h firmware/common/pins.hfirmware/common/hackrf_core.h renamed to firmware/common/pins.h

@@ -27,8 +27,8 @@
 extern "C" {
 #endif
 
-void pin_shutdown(void);
-void pin_setup(void);
+void pins_shutdown(void);
+void pins_setup(void);
 
 #ifdef __cplusplus
 }

firmware/hackrf-common.cmake

@@ -172,7 +172,7 @@ macro(DeclareTargets)
 		${PATH_HACKRF_FIRMWARE_COMMON}/power.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/cpu_clock.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/delay.c
-		${PATH_HACKRF_FIRMWARE_COMMON}/hackrf_core.c
+		${PATH_HACKRF_FIRMWARE_COMMON}/pins.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/leds.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/sgpio.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/rf_path.c

firmware/hackrf_usb/hackrf_usb.c

@@ -35,10 +35,10 @@
 #include <da7219.h>
 #include <delay.h>
 #include <drivers.h>
-#include <hackrf_core.h>
 #include <hackrf_ui.h>
 #include <leds.h>
 #include <operacake.h>
+#include <pins.h>
 #include <platform_detect.h>
 #include <power.h>
 #include <radio.h>
@@ -314,12 +314,12 @@ int main(void)
 	selftest.report.pass = true;
 
 	detect_hardware_platform();
-	pin_shutdown();
+	pins_shutdown();
 #ifndef RAD1O
 	clock_gen_shutdown();
 #endif
 	delay_us_at_mhz(10000, 96);
-	pin_setup();
+	pins_setup();
 #ifndef PRALINE
 	enable_1v8_power();
 	#ifndef RAD1O

firmware/hackrf_usb/usb_api_board_info.c

@@ -29,7 +29,7 @@
 
 #include <clock_gen.h>
 #include <firmware_info.h>
-#include <hackrf_core.h>
+#include <pins.h>
 #include <platform_detect.h>
 #include <rom_iap.h>
 #include <usb_queue.h>
@@ -130,7 +130,7 @@ usb_request_status_t usb_vendor_request_reset(
 	const usb_transfer_stage_t stage)
 {
 	if (stage == USB_TRANSFER_STAGE_SETUP) {
-		pin_shutdown();
+		pins_shutdown();
 		clock_gen_shutdown();
 #ifdef HACKRF_ONE
 		/*