diff --git a/docs/formatting-sd-(windows).md b/docs/formatting-sd-(windows).md
index 6ffd790a42451..406b36557daf0 100644
--- a/docs/formatting-sd-(windows).md
+++ b/docs/formatting-sd-(windows).md
@@ -10,18 +10,16 @@ This page is for Windows users only. If you are not on Windows, check out the [F
 
 ## What You Need
 
-* **For all SD card sizes**: The latest version of [SD Formatter](https://www.sdcard.org/downloads/formatter/sd-memory-card-formatter-for-windows-download/)
-* **For SD cards 64GB or larger only:** The latest version of [guiformat](https://nintendohomebrew.com/guiformat)
+* The latest version of [sdFormatWindows](https://github.com/flashcarts/sdFormatWindows/releases/latest)
 
 ## Instructions
 
-### Section I - SD Card Formatter
+### Section I - sdFormatWindows
 
 1. Insert your SD card into your computer
 1. If the SD card has any files and folders on it, copy everything to a folder on your computer
-1. Run `SD Card Formatter Setup` (the `.exe` file) in the downloaded `.zip` file with Administrator privileges, then install the program
-1. Run `SD Card Formatter` from the Start Menu
-1. Select your SD card's drive letter for "Select card"
+1. Run `sdFormatWindows.exe` 
+1. Select your SD card's drive letter for "Select drive"
 
     ::: danger
 
@@ -30,50 +28,15 @@ This page is for Windows users only. If you are not on Windows, check out the [F
     :::
 
 1. Enter anything for "Volume label"
-1. Ensure that "Quick Format" is selected
+1. If your SD card is 64GB or larger, check "Format as FAT32 (SDXC cards only)"
 1. Click "Format"
 1. Click "OK"
 1. Wait for the format to finish
 1. Click "OK"
-1. Close SD Card Formatter
-1. If the SD card is 32GB or smaller and had any files and folders on it before the format, copy everything back from your computer
-
-::: info
-
-You're done formatting your SD card if it's **32GB or smaller.**
-
-:::
-
-### Section II - guiformat (ONLY for 64GB or larger)
-
-1. Run `guiformat.exe`
-1. Select your SD card's drive letter for "Drive"
-
-    ::: danger
-
-    Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
-
-    :::
-
-1. Select a size for "Allocation unit size"
-    + If the SD card is 64GB, choose 32768
-    + If the SD card is larger than 64GB, choose 65536
-1. Enter anything for "Volume label"
-1. Ensure that "Quick Format" is selected
-1. Click "Start"
-1. Click "OK"
-1. Wait for the format to finish
-1. Click "Close"
-1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+1. Close sdFormatWindows
+1. If your SD card had any files and folders on it before the format, copy everything back from your computer
 
 ## Troubleshooting
 
-* guiformat shows the error "Failed to open device: GetLastError()=32"
-    + Close everything that may be using the SD card, such as any File Explorer windows.
-    + If this issue persists, try reformatting the card to NTFS in File Explorer, close that window when it's done, and re-attempt the guiformat process.
-
-* guiformat shows the error "GetLastError()=1117"
-    + Your SD card write-protection switch may be [enabled](/images/sdlock.png). The lock must be flipped upwards to allow writing to the SD card (including formatting).
-
 * SD card remains undetected by console or continues to display the wrong capacity after formatting
     + Your SD card may be partitioned or have unallocated space. Follow the instructions [here](https://wiki.hacks.guide/wiki/SD_Clean/Windows) to reformat your SD card.