尊敬的作者和各位大佬，想咨询关于arm架构，有打包好的docker镜像吗？或者打包方法

[knight-666]

尊敬的作者和各位大佬，想咨询关于arm架构，有打包好的docker镜像吗？或者打包方法

[Gavin1937]

主要回答在这里hiroi-sora/Umi-OCR#958

[knight-666]

主要回答在这里hiroi-sora/Umi-OCR#958

感谢大佬回复，逐句学习尝试，有问题在请教大佬，感谢感谢

[knight-666]

主要回答在这里hiroi-sora/Umi-OCR#958

大佬，我采用docker构建python的方式打包

FROM python:3.10-slim

ENV DEBIAN_FRONTEND=noninteractive \
    TZ=Asia/Shanghai \
    PIP_NO_CACHE_DIR=1 \
    PIP_DEFAULT_TIMEOUT=100

# 替换 apt 源（适配 debian.sources 格式）
RUN sed -i 's|deb.debian.org|mirrors.tuna.tsinghua.edu.cn|g; \
            s|security.debian.org|mirrors.tuna.tsinghua.edu.cn|g' \
            /etc/apt/sources.list.d/debian.sources

# 安装构建工具和依赖
RUN apt-get update && apt-get install -y --no-install-recommends \
    build-essential \
    cmake \
    ninja-build \
    git \
    pkg-config \
    libglib2.0-dev \
    libgl1-mesa-dev \
    libx11-dev \
    libxext-dev \
    libsm6 \
    libxrender-dev \
    wget \
    && rm -rf /var/lib/apt/lists/*

# 配置 pip 多源镜像（清华 → 阿里 → 中科大）
RUN mkdir -p /root/.pip && \
    echo "[global]\n\
index-url = https://pypi.tuna.tsinghua.edu.cn/simple\n\
extra-index-url = https://mirrors.aliyun.com/pypi/simple\n\
    https://pypi.mirrors.ustc.edu.cn/simple\n\
trusted-host = pypi.tuna.tsinghua.edu.cn\n\
    mirrors.aliyun.com\n\
    pypi.mirrors.ustc.edu.cn\n\
" > /root/.pip/pip.conf

WORKDIR /workspace
CMD ["/bin/bash"]

由于提示错误 No matching distribution found for PySide2>=5.15，把PySide2改成了PySide6

root@52a836005156:/workspace# ls
Dockerfile  LICENSE  README-docker.md  README.md  UmiOCR-data  requirements.txt  umi-ocr.sh
root@52a836005156:/workspace# vim requirements.txt 
root@52a836005156:/workspace# pip install -r requirements.txt
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple, https://mirrors.aliyun.com/pypi/simple, https://pypi.mirrors.ustc.edu.cn/simple
ERROR: Could not find a version that satisfies the requirement PySide2>=5.15 (from versions: none)
ERROR: No matching distribution found for PySide2>=5.15                                                                                                        
                                                                                                                                                               
[notice] A new release of pip is available: 23.0.1 -> 25.2
[notice] To update, run: pip install --upgrade pip
root@52a836005156:/workspace# vim requirements.txt 
root@52a836005156:/workspace# cat requirements.txt 
#PySide2>=5.15 # cp38~cp310
PySide6>=6.0
PyMuPDF>=1.23
fonttools>=4.47
pillow>=10.2
psutil>=5.9
pynput
zxing-cpp

运行python main_linux.py 提示错误

root@52a836005156:/workspace# ls
Dockerfile  LICENSE  README-docker.md  README.md  UmiOCR-data  requirements.txt  umi-ocr.sh
root@52a836005156:/workspace# cd UmiOCR-data/
root@52a836005156:/workspace/UmiOCR-data# ls
main_linux.py
root@52a836005156:/workspace/UmiOCR-data# ls -la
total 12
drwxr-xr-x 2 root root 4096 Aug 18 14:11 .
drwxr-xr-x 5 root root 4096 Aug 18 17:59 ..
-rw-r--r-- 1 root root 3124 Aug 18 14:11 main_linux.py
root@52a836005156:/workspace/UmiOCR-data# python -V
Python 3.10.18
root@52a836005156:/workspace/UmiOCR-data# python main_linux.py
【错误】 Umi-OCR Error 
 Failed to startup main program!

Traceback (most recent call last):
  File "/workspace/UmiOCR-data/main_linux.py", line 81, in <module>
    from py_src.run import main
ModuleNotFoundError: No module named 'py_src'

还望大佬帮忙看看，感谢

[knight-666]

root@46bc2394de9c:/workspace# ls
CHANGE_LOG.md  LICENSE           README.md     README_ja.md             UmiOCR-data  docs              umi-ocr.sh
Dockerfile     README-docker.md  README_en.md  Umi-OCR_Rapid_v2.1.5.7z  dev-tools    requirements.txt
root@46bc2394de9c:/workspace# python UmiOCR-data/main_linux.py 
19:50:57 ? init | 未能获取程序入口路径。
【错误】 Umi-OCR Error 
 Failed to startup main program!

Traceback (most recent call last):
  File "/workspace/UmiOCR-data/main_linux.py", line 83, in <module>
    main(app_path=app_path)
  File "/workspace/UmiOCR-data/py_src/run.py", line 142, in main
    from .server.cmd_client import initCmd
  File "/workspace/UmiOCR-data/py_src/server/cmd_client.py", line 12, in <module>
    from ..platform import Platform
  File "/workspace/UmiOCR-data/py_src/platform/__init__.py", line 9, in <module>
    from .linux.linux_api import Api as _Platform
  File "/workspace/UmiOCR-data/py_src/platform/linux/linux_api.py", line 8, in <module>
    from PySide2.QtCore import QStandardPaths as Qsp
ModuleNotFoundError: No module named 'PySide2'

[knight-666]

FROM python:3.8-slim

ENV DEBIAN_FRONTEND=noninteractive \
    TZ=Asia/Shanghai \
    PIP_NO_CACHE_DIR=1 \
    PIP_DEFAULT_TIMEOUT=100 \
    http_proxy=http://10.10.225.147:7897 \
    https_proxy=http://10.10.225.147:7897 \
    ftp_proxy=http://10.10.225.147:7897

# ------------------------------
# 删除所有官方源，避免重复拉包
# ------------------------------
RUN rm -f /etc/apt/sources.list /etc/apt/sources.list.d/*.list \
    && echo "deb http://mirrors.aliyun.com/debian bookworm main contrib non-free\n\
deb http://mirrors.aliyun.com/debian bookworm-updates main contrib non-free\n\
deb http://mirrors.aliyun.com/debian-security bookworm-security main contrib non-free" > /etc/apt/sources.list

# ------------------------------
# 更新并安装依赖
# ------------------------------
RUN apt-get update \
    && apt-get install -y --no-install-recommends \
        build-essential \
        cmake \
        ninja-build \
        git \
        pkg-config \
        libglib2.0-dev \
        libgl1-mesa-dev \
        libx11-dev \
        libxext-dev \
        libsm6 \
        libxrender-dev \
        wget \
        curl \
    && rm -rf /var/lib/apt/lists/*

# ------------------------------
# 升级 pip
# ------------------------------
RUN pip install --upgrade pip

# ------------------------------
# 安装项目的依赖
# ------------------------------
#RUN pip install --proxy http://your_proxy_server:port -r requirements.txt

WORKDIR /workspace
CMD ["/bin/bash"]

root@163fe5bf8cb7:/workspace# ls
CHANGE_LOG.md  LICENSE           README.md     README_ja.md             UmiOCR-data  docs              umi-ocr.sh
Dockerfile     README-docker.md  README_en.md  Umi-OCR_Rapid_v2.1.5.7z  dev-tools    requirements.txt
root@163fe5bf8cb7:/workspace# cat requirements.txt 
PySide2>=5.15 # cp38~cp310
#PySide6>=6.0
PyMuPDF>=1.23
fonttools>=4.47
pillow>=10.2
psutil>=5.9
pynput
zxing-cpp
root@163fe5bf8cb7:/workspace# pip install -r requirements.txt
ERROR: Could not find a version that satisfies the requirement PySide2>=5.15 (from versions: none)
ERROR: No matching distribution found for PySide2>=5.15

还是差依赖

[knight-666]

# 使用完整的 Python 3.8 镜像（非 slim）
FROM python:3.8

# 设置环境变量
ENV DEBIAN_FRONTEND=noninteractive \
    TZ=Asia/Shanghai \
    PIP_NO_CACHE_DIR=1 \
    PIP_DEFAULT_TIMEOUT=100

# 配置代理（http 和 https 都走代理）
# 如果你的代理端口不同，可以改成对应端口
ENV http_proxy=http://10.10.225.147:7897
ENV https_proxy=http://10.10.225.147:7897

# 修改 apt 源为阿里云镜像，加快下载
RUN rm -f /etc/apt/sources.list.d/*.list && \
    echo "deb http://mirrors.aliyun.com/debian bullseye main contrib non-free\n\
deb http://mirrors.aliyun.com/debian bullseye-updates main contrib non-free\n\
deb http://mirrors.aliyun.com/debian-security bullseye-security main contrib non-free" \
    > /etc/apt/sources.list

# 安装构建工具和 Qt 相关依赖
RUN apt-get update && apt-get install -y --no-install-recommends \
    build-essential \
    cmake \
    ninja-build \
    git \
    pkg-config \
    wget \
    curl \
    libglib2.0-dev \
    libgl1-mesa-dev \
    libx11-dev \
    libxext-dev \
    libsm6 \
    libxrender-dev \
    qtbase5-dev \
    qtdeclarative5-dev \
    libqt5gui5 \
    libqt5core5a \
    libqt5widgets5 \
    && rm -rf /var/lib/apt/lists/*

# 设置工作目录
WORKDIR /workspace

root@4cb354e7b997:/workspace# ls
CHANGE_LOG.md  LICENSE           README.md     README_ja.md             UmiOCR-data  docs              umi-ocr.sh
Dockerfile     README-docker.md  README_en.md  Umi-OCR_Rapid_v2.1.5.7z  dev-tools    requirements.txt
root@4cb354e7b997:/workspace# pip install -r requirements.txt

ERROR: Could not find a version that satisfies the requirement PySide2>=5.15 (from versions: none)
ERROR: No matching distribution found for PySide2>=5.15                                                                                                        
                                                                                                                                                               
[notice] A new release of pip is available: 23.0.1 -> 25.0.1
[notice] To update, run: pip install --upgrade pip

[knight-666]

# 使用 Ubuntu 22.04 作为基础镜像
FROM ubuntu:22.04

# 设置环境变量
ENV DEBIAN_FRONTEND=noninteractive \
    TZ=Asia/Shanghai \
    PIP_NO_CACHE_DIR=1 \
    PIP_DEFAULT_TIMEOUT=100 \
    http_proxy=http://10.10.225.147:7897 \
    https_proxy=http://10.10.225.147:7897 \
    ALL_PROXY=socks5://10.10.225.147:7897

# 安装 Python 3.10 和编译工具，设置 apt 国内源
RUN sed -i 's|http://archive.ubuntu.com/ubuntu/|http://mirrors.aliyun.com/ubuntu/|g' /etc/apt/sources.list && \
    sed -i 's|http://security.ubuntu.com/ubuntu/|http://mirrors.aliyun.com/ubuntu/|g' /etc/apt/sources.list && \
    apt-get update && \
    apt-get install -y --no-install-recommends \
        python3.10 python3.10-dev python3.10-distutils python3-pip \
        build-essential cmake ninja-build git pkg-config \
        libglib2.0-dev libgl1-mesa-dev libx11-dev libxext-dev \
        libsm6 libxrender-dev wget curl unzip tzdata && \
    rm -rf /var/lib/apt/lists/*

# 设置 pip 国内源
RUN python3.10 -m pip config set global.index-url https://pypi.tuna.tsinghua.edu.cn/simple

# 设置工作目录
WORKDIR /workspace

# 默认命令进入 bash
CMD ["/bin/bash"]

root@a65610ec0705:/workspace# python3 -V
Python 3.10.12
root@a65610ec0705:/workspace# ls
CHANGE_LOG.md  LICENSE           README.md     README_ja.md             UmiOCR-data  docs              umi-ocr.sh
Dockerfile     README-docker.md  README_en.md  Umi-OCR_Rapid_v2.1.5.7z  dev-tools    requirements.txt
root@a65610ec0705:/workspace# pip install -r requirements.txt
Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple
ERROR: Could not find a version that satisfies the requirement PySide2>=5.15 (from versions: none)
ERROR: No matching distribution found for PySide2>=5.15 

[knight-666]

找不到这个PySide2

[Gavin1937]

这个PySide2的依赖需求最早是从这个issue发现的。
不过你的情况不一样，应该是pip找不到arm64版PySide2>=5.15 的预编译包。
这种情况建议自己编译一份PySide2，毕竟换成PySide6的影响未知，网上也不一定能找到arm64版PySide6的包。

建议直接跟随官方文档源码编译PySide2

也可以参考以下文章：

• https://github.com/ISPlatonov/PySide2_for_Nvidia_Jetson_whl
• https://blog.csdn.net/guolianzi/article/details/130385133 （这个用的是conda来配置本地编译环境，不建议使用它，可能更麻烦）

也可以去qt官网的下载站里面找找有没有arm64版的pyside2
https://download.qt.io/official_releases/QtForPython/pypy/

[knight-666]

• https://github.com/ISPlatonov/PySide2_for_Nvidia_Jetson_whl

感谢大佬回复
执行过这一步 apt install qtbase5-dev qtchooser qt5-qmake qttools5-dev-tools
目前还是无法编译安装这个PySide2，应如何解决

root@c5fba3420977:/workspace# ls
CHANGE_LOG.md  PySide2-5.12.5a1-5.12.8-cp36-cp36m-linux_aarch64.whl  README_en.md	      UmiOCR-data  pyside-setup
Dockerfile     README-docker.md					     README_ja.md	      dev-tools    requirements.txt
LICENSE        README.md					     Umi-OCR_Rapid_v2.1.5.7z  docs	   umi-ocr.sh
root@c5fba3420977:/workspace# cd pyside-setup/
root@c5fba3420977:/workspace/pyside-setup# ls
CHANGES.rst	    LICENSE.GPLv3-EXCEPT	   README.shiboken2.md	coin_build_instructions.py  ez_setup.py		 testing
CMakeLists.txt	    LICENSE.LGPLv3		   appveyor.yml		coin_test_instructions.py   header.BSD-OLD	 testrunner.py
LICENSE.COMMERCIAL  README.cmake.md		   build_history	debug_windows.py	    keyword-errors.lst	 tools
LICENSE.FDL	    README.md			   build_scripts	dist			    missing_bindings.py
LICENSE.GPL2	    README.pyside2.md		   checklibs.py		docs			    setup.py
LICENSE.GPLv3	    README.shiboken2-generator.md  coin			examples		    sources
root@c5fba3420977:/workspace/pyside-setup# python setup.py install --qmake=/usr/bin/qmake --parallel=8 --build-tests
***** Exception while trying to prepare bdist_wheel override class: cannot import name 'pep425tags' from 'wheel' (/usr/local/lib/python3.8/site-packages/wheel/__init__.py). Skipping wheel overriding.
Unsupported python version detected. Only these python versions are supported: [(2, 7), (3, 3), (3, 4), (3, 5), (3, 6), (3, 7)]
root@c5fba3420977:/workspace/pyside-setup# qmake --version
QMake version 3.1
Using Qt version 5.15.8 in /usr/lib/aarch64-linux-gnu
root@c5fba3420977:/workspace/pyside-setup# ls
CHANGES.rst	    LICENSE.GPLv3-EXCEPT	   README.shiboken2.md	coin_build_instructions.py  ez_setup.py		 testing
CMakeLists.txt	    LICENSE.LGPLv3		   appveyor.yml		coin_test_instructions.py   header.BSD-OLD	 testrunner.py
LICENSE.COMMERCIAL  README.cmake.md		   build_history	debug_windows.py	    keyword-errors.lst	 tools
LICENSE.FDL	    README.md			   build_scripts	dist			    missing_bindings.py
LICENSE.GPL2	    README.pyside2.md		   checklibs.py		docs			    setup.py
LICENSE.GPLv3	    README.shiboken2-generator.md  coin			examples		    sources
root@c5fba3420977:/workspace/pyside-setup# git checkout 5.15
Switched to branch '5.15'
Your branch is up to date with 'origin/5.15'.
root@c5fba3420977:/workspace/pyside-setup# python setup.py install --qmake=/usr/bin/qmake --parallel=8 --build-tests
***** Exception while trying to prepare bdist_wheel override class: cannot import name 'safer_name' from 'wheel.bdist_wheel' (/usr/local/lib/python3.8/site-packages/wheel/bdist_wheel.py). Skipping wheel overriding.
***** Exception while trying to prepare bdist_wheel override class: cannot import name 'safer_name' from 'wheel.bdist_wheel' (/usr/local/lib/python3.8/site-packages/wheel/bdist_wheel.py). Skipping wheel overriding.
running install
running build
Initializing submodules for PySide2 version: 5.15.0a1
In directory /workspace/pyside-setup:
	Running command:  git submodule update --init
Submodule 'sources/pyside2-tools' (https://code.qt.io/pyside/pyside-tools.git) registered for path 'sources/pyside2-tools'
Cloning into '/workspace/pyside-setup/sources/pyside2-tools'...
Submodule path 'sources/pyside2-tools': checked out '1e8ec62d53f2c7ad579292b2948ebf3aaded420c'
In directory /workspace/pyside-setup:
	Running command:  git submodule foreach git fetch --all
Entering 'sources/pyside2-tools'
In directory /workspace/pyside-setup:
	Running command:  git submodule update
Python architecture is 64bit
==============================
Package version: 5.15.0a1
Build type:  Release
Build tests: 1
---
Make path:      /usr/bin/make
Make generator: Unix Makefiles
Make jobs:      -j8
---
setup.py directory:      /workspace/pyside-setup
Build scripts directory: /workspace/pyside-setup/build_scripts
Sources directory:       /workspace/pyside-setup/sources

Building shiboken2 will create and touch directories
  in the following order:
    make build directory (py*_build/*/*) ->
    make install directory (py*_install/*/*) ->
    setuptools build directory (build/*/*) ->
    setuptools install directory
      (usually path-installed-python/lib/python*/site-packages/*)

make build directory:   /workspace/pyside-setup/pyside3_build/py3.8-qt5.15.8-64bit-release
make install directory: /workspace/pyside-setup/pyside3_install/py3.8-qt5.15.8-64bit-release
setuptools build directory:   /workspace/pyside-setup/build/lib.linux-aarch64-3.8
setuptools install directory: /usr/local/lib/python3.8/site-packages

make-installed site-packages directory: /workspace/pyside-setup/pyside3_install/py3.8-qt5.15.8-64bit-release/lib/python3.8/site-packages
 (only relevant for copying files from 'make install directory'
                                  to   'setuptools build directory'

---
Python executable: /usr/local/bin/python
Python includes:   /usr/local/include/python3.8
Python library:    /usr/local/lib/libpython3.8.so
Python prefix:     /usr/local
Python scripts:    /usr/local/bin
---
Qt qmake:   /usr/bin/qmake -qt=5
Qt version: 5.15.8
Qt bins:    /usr/lib/qt5/bin
Qt docs:    /usr/share/qt5/doc
Qt plugins: /usr/lib/aarch64-linux-gnu/qt5/plugins
---
==============================
Creating build folder /workspace/pyside-setup/pyside3_build/py3.8-qt5.15.8-64bit-release...
Creating install folder /workspace/pyside-setup/pyside3_install/py3.8-qt5.15.8-64bit-release...
Building module shiboken2...
Creating module build folder /workspace/pyside-setup/pyside3_build/py3.8-qt5.15.8-64bit-release/shiboken2...
Qt Source dir: /Src/qtbase
Output format will be qthelp
Configuring module shiboken2 (/workspace/pyside-setup/sources/shiboken2)...
In directory /workspace/pyside-setup/pyside3_build/py3.8-qt5.15.8-64bit-release/shiboken2:
	Running command:  /usr/bin/cmake -G "Unix Makefiles" -DBUILD_TESTS=1 -DQt5Help_DIR=/usr/share/qt5/doc -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/workspace/pyside-setup/pyside3_install/py3.8-qt5.15.8-64bit-release /workspace/pyside-setup/sources/shiboken2 -DPYTHON_EXECUTABLE=/usr/local/bin/python -DPYTHON_INCLUDE_DIR=/usr/local/include/python3.8 -DPYTHON_LIBRARY=/usr/local/lib/libpython3.8.so -DQT_SRC_DIR=/Src/qtbase -DPACKAGE_SETUP_PY_PACKAGE_VERSION=5.15.0a1 -DPACKAGE_SETUP_PY_PACKAGE_TIMESTAMP= -DCMAKE_INSTALL_RPATH_USE_LINK_PATH=yes -DUSE_PYTHON_VERSION=3.3 -DDOC_OUTPUT_FORMAT=qthelp -DFULLDOCSBUILD=1
-- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Using Qt 5
-- Found PythonInterp: /usr/local/bin/python (found suitable version "3.8.20", minimum required is "3.3")
-- Found PythonLibs: /usr/local/lib/libpython3.8.so (found suitable version "3.8.20", minimum required is "3.3")
-- PYTHON_ARCH:             64
-- LLVM_CONFIG:
CMake Error at data/shiboken_helpers.cmake:146 (message):
  Unable to detect CLANG location by checking LLVM_INSTALL_DIR,
  CLANG_INSTALL_DIR or running llvm-config.
Call Stack (most recent call first):
  CMakeLists.txt:39 (setup_clang)


-- Configuring incomplete, errors occurred!
See also "/workspace/pyside-setup/pyside3_build/py3.8-qt5.15.8-64bit-release/shiboken2/CMakeFiles/CMakeOutput.log".
error: Error configuring shiboken2
Traceback (most recent call last):
  File "setup.py", line 296, in <module>
    setup_runner.run_setup()
  File "/workspace/pyside-setup/build_scripts/setup_runner.py", line 168, in run_setup
    raise RuntimeError(msg)
RuntimeError:
setup.py invocation failed with exit code: 1.


setup.py invocation was: /usr/local/bin/python setup.py install --qmake=/usr/bin/qmake --parallel=8 --build-tests --internal-build-type=shiboken2

[knight-666]

PaddleOCR-json 是否把这个docker镜像编译出来了，也能通过api接口调用ocr识别

这个PySide2的依赖需求最早是从这个issue发现的。 不过你的情况不一样，应该是pip找不到arm64版PySide2>=5.15 的预编译包。 这种情况建议自己编译一份PySide2，毕竟换成PySide6的影响未知，网上也不一定能找到arm64版PySide6的包。

建议直接跟随官方文档源码编译PySide2

也可以参考以下文章：

• https://github.com/ISPlatonov/PySide2_for_Nvidia_Jetson_whl
• https://blog.csdn.net/guolianzi/article/details/130385133 （这个用的是conda来配置本地编译环境，不建议使用它，可能更麻烦）

也可以去qt官网的下载站里面找找有没有arm64版的pyside2 https://download.qt.io/official_releases/QtForPython/pypy/

[Gavin1937]

看看这个回答

pyside2国内源是没有相应的版本，直接安装的apt库，包括一些其他的qt库

可以试试从ubuntu官方源里找找pyside2的库然后直接apt安装

[knight-666]

看看这个回答

pyside2国内源是没有相应的版本，直接安装的apt库，包括一些其他的qt库

可以试试从ubuntu官方源里找找pyside2的库然后直接apt安装

感谢回复，已把推理模型编译好，基于鲲鹏、麒麟，PaddleOCR-json我看下怎么编译，有问题在请教