Added targetr for ATOMRC F405 NAVI MINI with blackbox flash storage

[kijan007]

This pull requests adds support for $TARGET_NAME

• Target complies with docs/policies/NEW_HARDWARE_POLICY.md

The following items have been checked and confirmed working by an INAV developer on actual hardware: (feel free to remove non-relevant items)

• Samples received
• Flash firmware
• Calibrate
• Orientation matches
• Gyro working
• Accel working
• Voltage correct
• Current correct
• Baro working
• Mag I2C Bus
• Additional I2C2 Buses (Airspeed/other accessories)
• UART1
• UART2
• UART3
• UART4
• UART5
• UART6
• UART7
• UART8
• Analog Camera working
• Video Out working
• OSD working
• LEDs working
• Buzzer working
• Motor outputs
• DShot support on m1-4
• Servo outputs
• Blackbox
• PINIO1
• PINIO2
• PINIO3
• PINIO4

[mmosca]

Is this supposed to be an official target? Have samples been sent to devs already?

[kijan007]

@mmosca I have used this on INAV 8.0.1 on my hardware a season long without any issues, integrated 16MB flash blackbox works, rest it identical to ATOMRCF405_NAVI.

[sensei-hacker]

@kijan007 You are not affilifated with the manufacturer, is that correct?

[truglodite]

I understand that devs not having a sample or mfg affiliated contact may be an issue with having this target merged. I hoped seeing the release\9.1 tag above that maybe it would be available in configurator 9.1.1, but it is not. Is there a chance the atomrc mini may be added soon?

I have been flying the mini using the plain navi target for a while. Recently I have a need to use the onboard 16mb blackbox for current sensor calibration, which is what brought me here. Even if the release is "unofficial/not-recommended", it should be OK for my needs on the bench, and I would flash back to the plain navi target for normal use.