USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id

commit 001047e upstream.

works perfectly with:
modprobe ftdi_sio
echo "0590 00b2" | tee
/sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null

but doing this every reboot is a pain in the ass.

Signed-off-by: Niek Nooijens <niek.nooijens@omron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: Niek Nooijens

drivers/usb/serial/ftdi_sio.c

@@ -1045,6 +1045,8 @@ static const struct usb_device_id id_table_combined[] = {
 	/* IDS GmbH devices */
 	{ USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
 	{ USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
+	/* Omron devices */
+	{ USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) },
 	/* U-Blox devices */
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -661,6 +661,12 @@
 #define INFINEON_TRIBOARD_TC1798_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
 #define INFINEON_TRIBOARD_TC2X7_PID	0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
 
+/*
+ * Omron corporation (https://www.omron.com)
+ */
+ #define OMRON_VID			0x0590
+ #define OMRON_CS1W_CIF31_PID		0x00b2
+
 /*
  * Acton Research Corp.
  */