Update platformio_override.ini

Author: filipvdb

platformio_override.ini

@@ -45,6 +45,13 @@ default_envs =
 
 # Dig2Go
   dig2go
+  
+# An-Penta-Mini
+  an_penta_mini
+
+# An-Penta-Plus
+  an_penta_plus
+  
 
 #
 # Common settings for boards
@@ -120,6 +127,69 @@ build_flags_temperature =
 lib_deps_temperature =
   OneWire@~2.3.5
   milesburton/DallasTemperature@^3.9.0
+  
+#
+#
+# An-Penta-plus
+#
+
+[env:an_penta_plus]
+extends = esp32dev
+board = esp32dev
+platform = ${esp32.platform}
+platform_packages = ${esp32.platform_packages}
+build_unflags = ${common.build_unflags}
+lib_deps = ${esp32.lib_deps}
+board_build.partitions = ${esp32.default_partitions}
+build_flags = ${common.build_flags} ${esp32.build_flags}
+  -D WLED_BRAND="\"QuinLED\""
+  -D WLED_PRODUCT_NAME="\"An-Penta-Plus\""
+  -D DATA_PINS=2,4,12,32,33,5
+  -D LED_TYPES=TYPE_ANALOG_5CH,TYPE_WS2812_RGB
+  -D PIXEL_COUNTS=1,30
+  -D ABL_MILLIAMPS_DEFAULT=1250
+  -D BTNPIN=36,39,34,-1
+  -D BTNTYPE=BTN_TYPE_PUSH,BTN_TYPE_PUSH,BTN_TYPE_PUSH
+  -D RLYPIN=13
+  -D I2CSDAPIN=15
+  -D I2CSCLPIN=16
+  -D WLED_AUTOSEGMENTS
+  -D WLED_USE_ETHERNET
+  -D WLED_ETH_DEFAULT=8
+  # The USERMOD_TEST_MODE displays a test pattern on the outputs for factory testing. This usermod is optional.
+  -D USERMOD_TEST_MODE
+#
+# 
+# An-Penta-Mini
+#
+
+[env:an_penta_mini]
+extends = esp32c3dev
+platform = ${esp32c3.platform}
+platform_packages = ${esp32c3.platform_packages}
+framework = arduino
+board = esp32-c3-devkitm-1
+board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+lib_deps = ${esp32c3.lib_deps}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32c3.build_flags}
+  -D WLED_BRAND="\"QuinLED\""
+  -D WLED_PRODUCT_NAME="\"An-Penta-Mini\""
+  -D WLED_MAX_BUSSES=6
+  -D WLED_MAX_ANALOG_CHANNELS=6
+  -D WLED_MAX_DIGITAL_CHANNELS=2
+  -D PIXEL_COUNTS=1
+  -D LED_TYPES=TYPE_ANALOG_5CH
+  -D DATA_PINS=3,0,1,4,5
+  -D BTNPIN=2,8,9,-1
+  -D BTNTYPE=BTN_TYPE_PUSH,BTN_TYPE_PUSH,BTN_TYPE_PUSH
+  -D I2CSDAPIN=6
+  -D I2CSCLPIN=7
+  -D ARDUINO_USB_CDC_ON_BOOT=1
+  -D USERMOD_INTERNAL_TEMPERATURE
+  # The USERMOD_TEST_MODE displays a test pattern on the outputs for factory testing. This usermod is optional.
+  -D USERMOD_TEST_MODE
+
 #
 # Dig-Quad V3
 #