Fix duplicate AssemblyInfo attributes

Author: karpach

Karpach.RemoteShutdown.Controller.Tests/Karpach.RemoteShutdown.Controller.Tests.csproj

@@ -9,7 +9,7 @@
     <PackageReference Include="Microsoft.NET.Test.Sdk" Version="18.0.1" />
     <PackageReference Include="Microsoft.TestPlatform.TestHost" Version="18.0.1" />
     <PackageReference Include="NUnit" Version="4.4.0" />
-    <PackageReference Include="NUnit3TestAdapter" Version="4.6.2" />
+    <PackageReference Include="NUnit3TestAdapter" Version="5.0.0" />
     <PackageReference Include="Moq" Version="4.20.72" />
     <PackageReference Include="Moq.AutoMock" Version="3.6.2-ci0779" />
     <PackageReference Include="coverlet.collector" Version="6.0.4" />

Karpach.RemoteShutdown.Controller/Properties/AssemblyInfo.cs

@@ -2,36 +2,11 @@
 using System.Runtime.CompilerServices;
 using System.Runtime.InteropServices;
 
-// General Information about an assembly is controlled through the following
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("Karpach.RemoteShutdown.Controller")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("Karpach.RemoteShutdown.Controller")]
-[assembly: AssemblyCopyright("Copyright ©  2022")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
 // Setting ComVisible to false makes the types in this assembly not visible
 // to COM components.  If you need to access a type in this assembly from
 // COM, set the ComVisible attribute to true on that type.
 [assembly: ComVisible(false)]
 
 // The following GUID is for the ID of the typelib if this project is exposed to COM
 [assembly: Guid("6916ca57-9e37-48fe-b16c-44965008bebd")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.1.0.0")]
-[assembly: AssemblyFileVersion("1.1.0.0")]
 [assembly: InternalsVisibleTo("Karpach.RemoteShutdown.Controller.Tests")]